900Li V-belt for lawn tractor

Guide for radial miter saw in 305 mm Scheppach HM series

1375 mm Clutch cable, item 52, reference 5911241048 for various Scheppach mowers

Battery reference 7911200711 for Scheppach lawn mowers until 10/2020

Paper seal ref 3904801031 piece 0220500 for hedge trimmer of 4-in-1 garden tools and brushcutters Scheppach and Woodster

Fan for dust collector Scheppach HD12 or HA1600 but only for the machine with serie nr 0110

Pump seals reference 16040516 for log splitter horizontal Scheppach, Woodster or Kity

Reducing sleeve for connecting an 80 mm hose to a machine outlet in 100 mm.

Y Dust Extraction Fitting diameter 120 mm + 2 x 100 mm outlets with Blast Gate

Start capacitor 50μF 450V reference CONDO50

.

To install bits in tail of 8 mm on dfonceuses in 12 mm tail.

belt POLY V 1168J8 for thicknesser Kity 638 and 639

Bandsaw blade length 1875 mm for different machines as Kity 413, Woodster 2, Junior 2 and Inca euro 260...

5 meter hose for high pressure cleaner Scheppach HCE2000i

POLY V belt 1016J5 for the thicknesser of the Bestcombi 260 made in Bischwiller

A47 marker spring reference 5911216013 for Scheppach and Woodster lawnmowers

Knife protector for Scheppach HMS1070 jointer series n° 0109

Washer reference 3911201069 for lawn mower Scheppach and Woodster

Currents are often very rare sites, thanks to this set of distribution you can get electricity from a 32 A connection and distribute it to other devices !

Flush trim router bit 12.7 mm - shank 12 mm for plunge router

This power feeder Baby M3 is dedicated to small machines and spindles allowing the realization of work in series.

Chuck holder shaft MT2 - B16

Capacitor 10UF - 450V special start-up machine

Spindle moulder Fixed The Jean l'ébéniste MX5108 offers 4 speeds of rotation, interchangeable shaft of 30 mm for use of tool holders or reamer burs and a sliding table aluminum trolley! Best in class!

2500 pieces Galvanised Ring Nails in 65 mm

200 mm Blade clamp for various Kity, Scheppach and Woodster machines

Belt Poly V for spindle moulder of wood combi Lurem Optal 26

Profile knives and limiters 50x5,5 mm, profil n°280

45° chamfer cutter head carry out clean accurate bevels and joints, delivered with screw M14

Adjustment screws for various planer thicknessers in 204 mm and 254 mm width

RO-08 wheel diameter 80 mm for spindle moulder drives

Abrasive belt 1220x150 mm grit 120 in a professional quality antistatic for edge sanding machines as Holzmann BT1220, Bernardo BDSM230...

The HBS 360 bandsaw offers generous cutting power in a minimum of space. Its optimal price-performance ratio makes it the ideal tool for DIY enthusiasts.

Connection located above the bell of your mower and allowing the cleaning of your Scheppach and Woodster lawn mower!

Coupling and elbow for various Scheppach compressors mark 40 in the exploded view

Belt protector reference 5911244001 for Scheppach MS150-46E, MS161-46 (old reference 5911238026) lawn mowers

Clutch for Scheppach CSH56 and Woodstar CSP53

Wire hose clamp diameter 200 mm for dust collector and extraction hose

Aluminum hose for compressor Scheppach HC51V, reference 32-34 on the exploded view

Cylinder seal for various Scheppach and Parkside compressors

TCT circular saw blade 210 mm 48T negativ for sliding miter saw and electrical Hand Machines

Pressure switch for Scheppach, Zipper and Parkside compressors

Air filter protection cover reference 3904803026  for Scheppach and Woodster 51,7 cm3 brushcutters and garden tools 4 in 1 

Galvanised Smooth Shank Nails 18G in 38 mm - 5000pk

Air filter for Scheppach HC50S, HC51, HC80V and Parkside PKO 270 A1/A2 compressors

Carbon brushes for Woodstar SL8LU and Scheppach TKS1500A1

Bandsaw blade bimetal 1140 mm with variable pitch suitable for different metal bandsaw as Bernardo EBS100B, Leman SRM100

Easy-to-use Table circular saw Holzmann TS200, ideal for beginners in woodworking.

Set of 2 reduction bush with collar to put a tool bore 50 mm on spindle moulder 40 mm

Wood lathe copier knife

The Floor sweepter kit is ideal for cleaning and cleaning your machine and workshop from wood dust and chips!

Bandsaw blade length 4080 mm for different machines as Jean l'ébéniste BS600, Holzmann HBS610

The Carbamex colori Neutral paste wax is the patina of the Master Cabinetmakers!

Profile knives and limiters 50x5,5 mm, profil n°286

Velcro sanding disc 225 mm for Parkside sander PWDS920B2 in grit 60-80-120-180-240 - 5 pieces

Bevel pinion diameter 31,5x10 mm n° 53 for circular saw on table Scheppach, Redstone, Toolson, Dexter

Magnetic flywheel diameter 170 mm reference 5911241034 for various Scheppach mowers

Bandsaw blade length 1050 mm for different machines as Ryobi, Metawood, Elem

Pressure regulator for Scheppach compressors HC54, HC24DC, HC08, HC25 et HC25o

Strap length 125-129 cm for dust collector

12mm shank cutter clamp on table router

Flat belt for wood combi Lurem C260

Reducing sleeve for connecting a 120 mm hose to a machine outlet in 150 mm.

Toothed belt XPZ1012 for thicknesser Kity 638 and Kity 639

Flat belt 340x8 mm for old planer and thicknesser Scheppach

Profile knives and limiters 50x5,5 mm, profil n°240

Profile knives and limiters 40x4 mm, profil n°125

Bowden drive cable ref. 5911269002 for Scheppach lawn mowers – Z-shaped hooks on both ends – Length 1400/1450 mm according to the following list: COMPATIBLE MACHINES LIST

A50 marked screw for Scheppach and Woodster lawnmower blades

Turbine outlet connection for dust collector Ø500 mm

Chain nut or tensioner part number 3904801064 for the chainsaw chain guide on Scheppach and Woodster 4-in-1 garden tools and brushcutters as well as Parkside PBK4B3 manufactured by Scheppach only (not compatible with Grizzly)

Clutch pulley for planer and thicknessers Scheppach HMS2600ci, Plana 3.0 and Kity 2635 (reference 41 + 45)

Universal electrocorundum abrasive belt for sanding and deburring steel sheets, aluminum, cast iron parts, non-ferrous materials, plywood, hard and soft woods.

Clean cut surface with its teeth reverse of the panels replaqués and work plans

Rings of reduction to 32 to 13 mm blade Sharpener

The Holzmann TSM250 disc sander is used for sanding ferrous or non-ferrous metals and wood.

Set of 3 planer knives HM (tungsten carbide) in 250x30x3.0 mm for precious woods, laminate, MDF and plywood.

MK2 rotating tailstock for metal lathes and wood lathes.

A thermal log saw with a blade of 700 mm, 12.2 hp of motor, important cutting capabilities!

.

The blade is made of hardened steel and burnished, it is of type slider with a central lumen allowing it to slide.

Bandsaw blade length 2950 mm for different machines as Scheppach Basa 4.0 and Holzmann HBS400, Bernardo HBS400

Profile knives and limiters 40x4 mm, profil n°40

Profile knives and limiters 40x4 mm, profil n°111

TCT circular saw blade 250 mm with trapezoidal negative teeth for non ferrious metal and aluminium

Charger cable reference 7911200702 for 1.0A battery and for lawn mowers Scheppach MS173-51 and MS196-51E, Woodster TT173-51E and TT196-51E

Throttle grip reference 5904805002  for Scheppach 4 in 1 garden tools

Cotton Filter bag for different dust collector diameter 500 mm

Tool Support 300 mm for wood lathe Holzmann VD1100Eco

Bobbin sleeves grit 80 diameter 51 mm for oscillating cylinder sander Triton TSPS370, Jean l'ébéniste PAO230, Jet JBOS-5

Holzmann SB3116RMN Radial Drill Press Boring Machine for Angular and Difficult Drilling!

5000 Staples 1.2 mm type 90 in 13 mm

Belt Poly V type H for wood combi Lurem C265