12 pieces router bit sets - Shank 12.7 mm
Set of 12 carbide router bits of different profiles shank 12.7 mm for plunge router quality DIY
Set of 12 carbide router bits of different profiles shank 12.7 mm for plunge router quality DIY
25° Chamfer router bit with ball bearing - shank 6 mm for plunge router
Set of 3 carbide router bits for panel door shank 12,7 mm quality DIY
Abrasive belt 400x60 mm grit 120 for portable belt sander
This roll flap is ideal for sanding of surfaces and sanding curved pieces and not planes!
This roll flap is ideal for sanding of surfaces and sanding curved pieces and not planes!
Aluminium Oxide Bench Grinding Wheel
This aluminum profile for the support of the trolley is assembled with a Kity, Scheppach and Woodster construction saw
Metabo PE15-20RT angle polisher with high torque for fine sanding and high-gloss polishing of lacquered surfaces.
Armature reference 5901215032 for radial miter saw Scheppach, Woodstar, Parkside and Manupro
Scheppach AVC20 ash vacuum cleaner equipped with a flame retardant hose and a double filter system consisting of a particle filter and a metal pre-filter, the SCHEPPACH AVC20 ash vacuum cleaner incorporates a filter cleaning function which is activated by pressing a button.
Scheppach auger drill cutting diameter 150 mm
Auger drill diameter 200 mm
Automatic feeder for spindle moulder Maggi STEFF 20316 POWER - 400V - Professional range with 16 fixed speeds and the most powerful motor of all!
The Bernardo HBS460N band saw is the ideal machine for ambitious DIY enthusiasts. This model is fitted with a 2-speed gearbox as standard. The machine also has a quick-release lever to change the tape quickly.
This Scheppach HBS400 band saw will bring you serious help to perform many jobs, whether it is sawing wood or plastics.
The HBS 360 bandsaw offers generous cutting power in a minimum of space. Its optimal price-performance ratio makes it the ideal tool for DIY enthusiasts.
Small compact and lightweight Holzmann HBS230ECO band saw ideal for small jobs.
The JET JWBS-15-M bandsaw has a 375mm flywheel and a blade width of 5-25mm allowing for fretwork over a cutting height of 356mm. Its cast iron table tilts 45 degrees and its cutting depth is 359 mm.
The Leman SRU355 band saw offers good cutting capabilities thanks to its 200 mm cutting height and 345 mm gooseneck width!
Grab bar on filter bag for 75 liter Scheppach and Woodster chip vacuum cleaner and other similar brands
This Holzmann BT1220TOP long belt and disc sander is a machine with a large flat surface for sanding and dressing work. The rounded end of the band is ideal for modeling and sanding fretwork shapes.
The sanding machine Scheppach BTS700 is ideal for fine sanding and fretwork work.
The versatile "two-in-one" Scheppach BGS700 grinder is a sanding and grinding machine. On the occasion of Father's Day, it is offered here with 3 abrasive bands, grit 60-120-180, offered!
Bench grinder Holzmann DSM150200W ideal for sharpening your tools.
Succeeding the KF 25 Vario, this version offers as standard an enlarged spindle taper, a larger milling table and 2 digital displays for speed (50 - 3000 rpm) and spindle stroke. This compact drill milling machine is also characterized by its electronic speed variator, and by its tilting milling head from -90° to +90°.
The Bernardo HBS450 bandsaw seduces with its large ground table and gray cast iron steering wheels. For the budget-conscious DIYer, this is the ideal machine.
The KF 25 D Vario is fitted as standard with a digital speed and travel depth indicator.
The drilling and milling machine KF 25 L Vario comes complete with a digital speed and spindle stroke display as a standard feature and is rounded off with a 490 mm x-axis travel. This machine is very popular among both professionals and model-makers along with all areas of training.
Blade for hedge trimmer Scheppach HTH250/240P and Woodstar HTW25/24P
Blade reference 7910700702 for Scheppach and Woodster garden tools 4 in 1 and brush cutters
Brush for high pressure cleaner Scheppach
Carbide circular blade specially designed for the fine and clean cut lengthwise and crosswise of all soft and hard woods.
Carbide circular saw blade 315 mm - 24 teeth economic series
The Bernardo work benches WB 2000 Hobby made from beech feature precise workmanship and an excellent finish and are therefore the best choice for craftsmen and carpenters.
Chainsaw chain reference 7910700704 for Scheppach and Woodster garden tools 4 in 1
Chainsaw cover for Scheppach battery-powered multifunction garden tool
Chainsaw cover for Scheppach multifunction garden tool Scheppach TPX710 and TPH500
This pruner Woodster CSP10 equipped with a powerful 2-stroke 25.3 cm3, very efficient has a powerful torque!
Metabo ASC 55.12-36 V charger with "Air Cooled" technology.
TCT circular saw blade diameter 150x2,8x16 mm 24T for electrical Hand Machines
TCT circular saw blade diameter 150x2,8x16 mm 48T for electrical Hand Machines
TCT circular saw blade diameter 150x2,8x16 mm 48T for electrical Hand Machines
TCT circular saw blade 180 mm with trapezoidal negative teeth for non ferrious metal and aluminium
TCT circular saw blade diameter 200 mm Z40 for table saw, panel saw and electrical Hand Machines
Carbide circular saw blade for radial miter saw and portable electric saw, for fast cutting of soft and hard wood, cutting blade.
Bernardo SBS700 Circular Saw Sharpener can sharpen different types of saw blades.
Big sister of the JTS 315LA-M, with slightly higher capacities, the JET JTS-315SP construction circular saw is distinguished by its use both on site and/or stationary in a workshop.
Connector for Scheppach and Woodster garden tool 4 in 1 and brush cutter
Metabo W 18 LTX 125 QUICK cordless angle grinder with tapered body for fatigue-free work in tight spaces or overhead!
without battery or charger
Brushless cordless impact drill with optimal power for demanding applications! Supplied with 2 4AH LI-ION batteries and ASC 55 charger!
Metabo SB18LTBL Brushless cordless impact drill with optimum power for demanding applications!
without battery or charger
Metabo SGS 18 LTX Q 2-in-1 tool: for precise shaping of hedges and lawn shears for clean lawn edges.
Without battery or charger
Metabo AHS 18-45 V cordless hedge trimmer with blades with special geometry for low wear and therefore 200% longer service life.
Lightweight, powerful and quiet Metabo AHS 18-65 V cordless hedge trimmer for noise-sensitive areas.
Without battery or charger
Scheppach BHT560-40LI cordless hedge trimmer delivered without battery or charger. This hedge trimmer will allow you to carry out the work in your garden simply and quickly. Its 90 ° swivel handle will also allow you to work without constraint and in all inclinations.
Cordless jigsaw STAB 18 LTX 100 equipped with the Metabo Quick system!
Without battery or charger
Quiet Metabo RM 36-18 LTX BL 46 cordless mower for efficient mowing, collection and mulching on areas up to 800 m².
Without battery or charger
Cove router bit radius 12.7 mm - Shank 6 mm for plunge router
Cove router bit radius 12.7 mm - Shank 8 mm for plunge router
Cove router bit radius 6.35 mm - Shank 6 mm for plunge router
Cove router bit radius 6.35 mm - Shank 8 mm for plunge router
Cove router bit radius 8 mm - Shank 6 mm for plunge router
Cove router bit radius 8 mm - Shank 8 mm for plunge router
Cove router bit radius 9.5 mm - Shank 6 mm for plunge router
Cove router bit radius 9.5 mm - Shank 8 mm for plunge router
Milling cutter for making 12 mm grooves only on the Belmash SDMR2500
Decorative ogee router bit Ø 19 - shank 8 mm for plunge router
Jackhammer 17 kg with a percussion force of 60 Joules ideal for demanding work!
High quality smooth continuous rim diamond blade for cutting fine porcelain stoneware, earthenware tiles, glazed stove tiles
Disk table item 64 for belt sander and bench disk Scheppach, Woodstar and Manupro
The model WBS 640 Pro is a professional cylinder sanding machine with stepless adjustable feed rate. Thanks to the 2 sanding rollers, rough and fine sanding can be carried out in one pass by using different sanding belt grain sizes. The heavy machine stand ensures high stability and thus precise grinding results.
The model FM 45 HSV feature a high speed range (75 - 3200 rpm) as well as a large range of standard accessories ( for instance automatic spindle feed, digital spindle stroke indication, LED working light etc.), making this machine ideal for mechanics, repair shops and and for training purposes.
The drilling and milling machine KF 25 Pro features a high speed range up to 3000 rpm, a powerful drive motor (900 W) and a MT 3 spindle taper making this model ideal for user with high expectations. For reducing the non-productive time, this model is equipped with a 3-axis digital readout and a stepless adjustable table feed.
The ZSM 560 cylinder sander is suitable for sanding work on workpieces up to 1120 mm wide. Conveyor feed speed varies to match the parts for optimal results.
High quality diamond cutting disc for cutting construction materials, Concrete, Old concrete, reinforced, Sand-lime bricks
Dust collector Bernardo DC300 Powerful and mobile, the DC 300 dust vacuum cleaner improves the performance of your woodworking machines and helps you keep your workspace clean.
With its increased storage capacity (+ 50% compared to the DC 300), the DC 400 vacuum cleaner is more practical, because it is necessary to change bags less often. This model offers optimum value for money for experienced DIY enthusiasts who want to keep a clean workshop.
The Bernardo DC450CF dust collector equipped with an FP2 filter cartridge offers a suction capacity of 2800 m³ / h and storage of 300 liters of chips!
The dust collector Bernardo DC500E has a capacity of 2 times 200 liters of chip storage, so more than its competitors, because its height is greater! It has a motor of 2200W, a suction power of 3880 m³ / h!
Dust collector Holzmann ABS850 with great performance for comfortable and quiet work!
The Jean L'Ebeniste FM350 professional workshop vacuum cleaner will allow you to connect 4 machines simultaneously! Its motor power of 5100W and its extraction force of 4560 m³ / h makes it ideal for small and medium workshops!
Light and handy Metabo SXE 3125 eccentric sander with perfect ergonomics!
Swaging Holzmann SKM470S solid and stable, perfectly suited for the manufacture of pipe fittings of different materials (steel, aluminum, brass, bronze, copper and others).
This Electric tile cutter Scheppach FS3600 offers a large cutting capacity of up to 920 mm long !
This electronic metal lathe Bernardo Profi 750LZ has impressive capabilities and has an optimal price-quality ratio !
Metal lathe top of the range in the field filming with a large distance 300 mm entrepointes. The setting of the continuously variable speed makes this machine ideal for the people followers of precision mechanics as well as for the Modelers.
Exhaust for Scheppach and Woodster thermal garden tools
80 cm extension reference 7910700710 for garden tools 4 in 1 and brush cutters Scheppach and Woodster
Filter bag for wet and dry vacuum cleaner Scheppach ha200s and Scheppach HD2p
2500 pieces Galvanised Ring Nails in 50 mm
Scheppach SG7100 generator set equipped with a 420 cm3 4-stroke engine providing 5500 W at maximum power.
Grinding wheel 250 x 32 x 32 mm - grit 36 for bench grinder
Grinding wheel 250 x 32 x 32 mm - grit 80 for bench grinder