Pulley axis part n° 252 for planer and thicknesser Leman RAD260, Lurem RD26F, part n° 114 for Holzmann HOB260MINI
This Toothed pulley is intended for the Leman RAD260 jointer but also Lurem RD26F
Blade clamp in 260 mm for planer thicknesser Leman RAD260, Lurem RD26F, Holzmann HOB260MINI - Sold individually without screws
Ring spart n° 255 is intended for the Leman RAD260 jointer but also Lurem RD26F
Circlips spart n° 254 is intended for the Leman RAD260 jointer but also Lurem RD26F
Flat belt rubber for planer and thicknesser Leman RAD260, Lurem RD26F, Holzmann HOB260MINI
Chip collector ref 210000.174 for Leman RAD260
864 mm Belt Poly V for planer and thicknesser
Screw M6x11 item 101 of the exploded view is intended for the Leman RAD260 jointer but also Lurem RD26F
Rubber roller n° 107 reference 10015416 for planer thicknesser Holzmann HOB260MINI
Moving wheel n° 20 ref 10015407 for planer and thicknesser Holzmann HOB260MINI
This pinion is intended for the Leman RAD260 thicknesser planer but also Lurem RD26F
Plastic gear piece n° 258 for planer and thicknesser Leman RAD260 and Lurem RD26F, piece n° 116 ref 10015419 for Holzmann HOB260MINI
Pinion 15 teeth diameter 30 mm bore 8 mm thickness 10 mm - Spare part n° 51 ref 10015409 for planer and thicknesser Holzmann HOB260MINI
Pinion 15 teeth diameter 30 mm bore 8 mm - Spare part n° 75 ref 10015411 for planer and thicknesser Holzmann HOB260MINI
Pulley diameter 42 mm bore 15 mm thickness 18 mm - Spare part n° 86 ref 10015414 for planer and thicknesser Holzmann HOB260MINI
Motor pulley for planer and thicknesser Leman RAD260 and Lurem RD26F, piece n° 37 ref 10015408 for Holzmann HOB260MINI
Bevel gear diameter 26 mm for planer and thicknesser Leman RAD260 and Lurem RD26F, piece n° 53 ref 10015410 for Holzmann HOB260MINI
Ball bearing 6203-2RZ for planer and thicknesser Leman RAD260 and Lurem RD26F, piece n° 93 ref 10015415 for Holzmann HOB260MINI
Plastic sprocket dia. 67 mm for planer and thicknesser Leman RAD260 and Lurem RD26F, piece n° 108 ref 10015417 for Holzmann HOB260MINI
Pinion dia. 29 mm for planer and thicknesser Leman RAD260 and Lurem RD26F, piece n° 112 ref 10015418 for Holzmann HOB260MINI
Chain for planer and thicknesser Leman RAD260 and Lurem RD26F, piece n° 122 ref 10015421 for Holzmann HOB260MINI
Screw handle for planer and thicknesser Leman RAD260 and Lurem RD26F, piece n° 165 ref 10015426 for Holzmann HOB260MINI
M8 indexable lever for planer and thicknesser Leman RAD260 and Lurem RD26F, piece n° 192 ref 10015427 for Holzmann HOB260MINI
Feed roller piece n° 138 for Holzmann HOB260MINI
Discover our selection of spare parts for the Holzmann HOB260MINI planer thicknesser, designed for maintenance, troubleshooting and replacement of worn mechanical or electrical components.
The Holzmann HOB260MINI performs two essential woodworking operations: surface planing, which produces a flat face and a reference edge, and thicknessing, which brings wooden workpieces to the required thickness.
Over time, certain components may wear out, including drive belts, feed rollers, gears, pulleys, bearings and adjustment mechanisms.
At Probois Machinoutils, we offer a range of replacement parts for the Holzmann HOB260MINI to help you identify faulty components and repair your machine without necessarily replacing the entire piece of equipment.
Our selection includes belts, gears, pulleys, feed rollers, cutter blade clamping components, a cutterblock bearing, a capacitor and various mechanical accessories.
Drive belts transmit movement between different mechanical components of the planer thicknesser.
They must have the correct dimensions and profile to match the machine's pulleys.
Our category includes two belts for the Holzmann HOB260MINI.
864 mm Poly-V Belt with 5 Ribs – Position 94
This belt has a stated length of 864 mm and five longitudinal ribs. Its profile must match the pulleys on which it operates.
Rubber-Coated Flat Belt – Position 134, Reference 10014572
This belt is another component of the machine's transmission system.
These two belts do not necessarily perform the same function and are not interchangeable.
Before ordering, identify the position number of the belt you need to replace and check its specifications on the product page.
A belt may need replacing when it shows signs of wear or deterioration.
The most common symptoms include:
A cracked, split or frayed belt.
Damaged ribs on a Poly-V belt.
Slipping during operation.
Irregular transmission of movement.
A broken belt or one that has come off its pulleys.
Unusual noise from the transmission system.
A slipping belt may cause a reduction in transmitted power.
However, before replacing it, also check the condition of the pulleys, their alignment and the belt tension requirements specified by the manufacturer.
A new belt fitted to a damaged pulley may wear prematurely.
Pulleys transmit movement between the motor and the machine's various mechanisms.
A damaged, deformed or incorrectly secured pulley may cause vibrations, abnormal belt wear or irregular power transmission.
Our selection includes several components for the Holzmann HOB260MINI:
Motor pulley, position 37.
Pulley with a diameter of 42 mm, bore of 15 mm and thickness of 18 mm, position 86, reference 10015414.
Toothed pulley, position 116.
Pulley shaft, position 114.
These components have different functions and dimensions.
It is essential to identify the exact part on the exploded parts diagram before ordering.
For a pulley, check its diameter, bore, thickness, profile and attachment system.
Gears and pinions transmit movement between several mechanical components of the machine.
They are used in the transmission and feed mechanisms.
This category includes several references for the Holzmann HOB260MINI.
15-Tooth Pinion – Position 51, Reference 10015409
Number of teeth: 15.
Diameter: 30 mm.
Bore: 8 mm.
Thickness: 10 mm.
15-Tooth Pinion – Position 75, Reference 10015411
Number of teeth: 15.
Diameter: 30 mm.
Bore: 8 mm.
These two pinions share certain specifications, but their position numbers and references are different.
They must therefore not be considered interchangeable without verification.
Our selection also includes a bevel gear, a plastic gear and other transmission components.
Bevel gears transmit movement between shafts arranged at an angle to one another.
Our category offers a bevel gear, position 53, with the following specifications:
Diameter: 26 mm.
Bore: 8 mm.
Thickness: 18 mm.
We also offer two plastic components.
Plastic Gear – Position 108
Diameter: 67 mm.
Bore: 10 mm.
Thickness: 15 mm.
Plastic Pinion – Position 112
Diameter: 29 mm.
Bore: 10 mm.
Thickness: 7 mm.
Plastic gears may develop worn teeth or become damaged if a mechanical mechanism jams.
Before replacing a broken gear, it is important to identify the cause of the problem.
A jammed mechanism or another damaged pinion may cause the new component to fail prematurely.
The position 119 pinion, reference 10015420, is also among the parts offered for the Holzmann HOB260MINI.
It is important not to confuse it with the machine's other pinions.
The category also includes a toothed component, position 116, which may be described using different transmission-related terms.
To avoid ordering mistakes, always check the position number on the exploded parts diagram and the specifications on the product page.
When several components operate together within the same mechanism, inspect their overall condition before reassembly.
A new pinion should not be installed without checking the components with which it operates.
The drive chain transmits movement between mechanical components equipped with suitable sprockets.
Our selection includes a drive chain, position 122, reference 10015421, offered for the Holzmann HOB260MINI planer thicknesser.
A chain in good condition should operate correctly with its sprockets, without stiff links or visible deterioration.
Replacement may be necessary if the chain shows:
Damaged links.
Significant wear.
Excessive elongation.
Stiff links.
Breakage.
Irregular operation caused by deterioration.
Before replacing the chain, also inspect the condition of the associated sprockets.
A new chain fitted to heavily worn sprockets may not operate satisfactorily.
The serrated feed roller helps advance the wood during thicknessing operations.
It feeds the workpiece towards the cutting mechanism under the operating conditions specified by the manufacturer.
Our category includes the serrated feed roller, position 106, reference 10014571, for the Holzmann HOB260MINI.
A serrated roller must retain a surface suitable for its feeding function.
Damaged teeth, deformation or rotation problems may interfere with the movement of the wood.
If workpieces no longer feed correctly, inspect the entire mechanism before concluding that the roller is faulty.
The transmission, machine settings and operating conditions may also affect feeding performance.
The smooth rubber roller is also part of the wood-feeding system.
Our selection includes the smooth roller, position 107, reference 10015416, designed for the Holzmann HOB260MINI.
Its rubber-coated surface helps maintain contact with the workpiece as it passes through the machine.
Over time, the coating may show signs of wear, deterioration or deformation.
A damaged roller may contribute to irregular feeding or difficulty advancing the wood.
Before ordering, check the position number of the roller you need to replace.
The serrated roller at position 106 and the smooth roller at position 107 are two separate components and must not be confused.
A wood-feeding problem may have several causes.
Start by checking the machine's operating conditions and the settings recommended by the manufacturer.
Then inspect the following components:
The condition of the serrated feed roller.
The condition of the smooth rubber roller.
The drive belts.
The chain and sprockets.
Any possible mechanical obstruction.
The cleanliness and condition of the surfaces over which the wood travels.
A roller that no longer rotates is not necessarily defective: the problem may originate from an upstream transmission component.
Conversely, a functioning transmission mechanism does not guarantee correct feeding if the roller's coating is damaged.
A systematic diagnosis helps you replace only the component actually responsible for the problem.
Securely holding the planer blades is essential for the machine's operation.
Our category includes a clamping wedge, also known as a blade clamping bar, position 82, offered for the Holzmann HOB260MINI.
This component is sold individually, without screws.
We also offer an M6 × 11 mm screw, position 84, designed for securing the blades.
These components help retain the blades in their housings according to the cutterblock's design.
It is essential to use components that meet the specifications required for the machine.
A deformed clamping wedge, a damaged screw or a deteriorated thread may compromise clamping reliability.
Any work on the cutterblock must be carried out with the machine unplugged, strictly following the manufacturer's installation and adjustment instructions.
Never operate the machine if the blades are not securely clamped.
Bearings support rotating shafts and help reduce friction.
Our selection includes a 6203-2RZ cutterblock bearing, position 93, offered for the Holzmann HOB260MINI.
A deteriorated bearing may cause abnormal noise, overheating, vibrations or mechanical play.
However, these symptoms may also have other causes.
Before replacing the bearing, the diagnosis must be confirmed and the condition of associated components checked.
Removing and reinstalling the cutterblock requires particular care.
If you do not have the appropriate skills and tools, entrust this work to a qualified professional.
Our category includes a CBB60 wired starting capacitor rated at 40 µF and 450 V, offered for the Holzmann HOB260MINI planer thicknesser.
The capacitor contributes to the motor's electrical operation according to the configuration specified by the manufacturer.
A faulty capacitor may be considered among the possible causes when a motor has difficulty starting.
Symptoms may include a motor that struggles to start or produces a humming noise without starting properly.
However, these signs alone do not confirm that the capacitor is responsible.
A power supply fault, mechanical obstruction or another electrical problem may produce similar symptoms.
Before ordering, check the 40 µF capacitance, 450 V rated voltage, capacitor type, connections and compatibility with the exact version of your machine.
Warning: A capacitor may retain an electrical charge after the power has been switched off. Inspection and replacement must be carried out by a qualified person.
Small mechanical components play an important role in positioning and retaining transmission parts.
Our category includes a circlip, position 118, for the Holzmann HOB260MINI.
Depending on its configuration, a circlip provides axial retention for a component on a shaft or inside a housing.
A deformed, broken or incorrectly installed circlip may no longer perform its function correctly.
The category also features a bushing measuring 22 × 16 × 1 mm, listed for other planer thicknesser models.
The presence of a part in this category does not automatically guarantee compatibility with the HOB260MINI. For the bushing, specifically check the list of compatible machines before ordering.
When replacing a small mechanical component, observe the dimensions, position and specifications of the original part.
Control and adjustment components allow certain parts of the machine to be positioned and secured.
Our selection includes an outfeed table adjustment handle, position 165, reference 10015426, for the Holzmann HOB260MINI.
We also offer an M8 indexing lever, position 192, reference 10015427.
A broken handle or damaged lever may make adjustment operations difficult.
However, before replacing the control component, check that the associated mechanism is not jammed.
A new handle will not solve a problem caused by a seized screw or another damaged mechanical component.
Make sure the thread specifications and position number match those of the original component.
Our category includes a transport wheel, position 20, reference 10015407, designed for the Holzmann HOB260MINI.
This component is part of the machine's transport system.
A broken, jammed or heavily worn wheel may make moving the machine difficult.
Before ordering, check its position number, dimensions and attachment system.
After replacement, make sure the machine rests correctly and remains stable in its working position.
Moving and repositioning the machine must be carried out according to the manufacturer's instructions.
Several components featured in this category are also offered for the Leman RAD260 and Lurem RD26F planer thicknessers.
These include certain belts, pulleys, transmission components and blade clamping parts.
However, position numbers may differ from one brand to another.
For example, the same component may have one position number on the Leman exploded diagram and another on the Holzmann HOB260MINI diagram.
You should therefore not rely solely on visual similarity or the generic name of a component.
Check the reference, dimensions and compatibility list provided on each product page.
A part listed only for Leman or Lurem must not be considered compatible with Holzmann unless this has been explicitly confirmed.
To avoid ordering mistakes, start by identifying your machine precisely.
Record the following information:
The exact Holzmann HOB260MINI model.
The serial number.
The manufacturing month and year, where available.
The part's position number on the exploded diagram.
The manufacturer's part reference, if indicated.
The dimensions of the original component.
For a belt, check its length and profile.
For a pinion, check the number of teeth, diameter, bore and thickness.
For a capacitor, check its capacitance, rated voltage, type and connections.
For a roller, identify its position number and specifications.
IMPORTANT: BEFORE PURCHASING, always check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also verify the month and year of manufacture and your machine's serial number.
A localised mechanical fault does not always require replacing the entire machine.
A broken belt, damaged pinion, worn roller or broken handle can be replaced individually when a compatible spare part is available.
However, identifying the cause of the failure is essential.
A belt that repeatedly breaks may indicate a pulley or transmission problem.
A damaged pinion may be the result of a jammed mechanism.
Difficulty feeding wood may originate from several different components.
Replacing the visibly damaged part must therefore not conceal a more serious underlying problem.
A repair based on an accurate diagnosis allows you to retain components that are still functional and extend the service life of your equipment.
At Probois Machinoutils, discover our selection of spare parts for the Holzmann HOB260MINI planer thicknesser to maintain your machine and replace worn components.
Explore our drive belts, pulleys, pinions, gears, chain, feed rollers, blade clamping components, bearing, capacitor, handles and mechanical accessories.
Each component must be selected according to your machine's exact reference and the information provided on its product page.
Looking for a part that is not included in our selection? Send us your machine's model, serial number and, if possible, the component's position number on the exploded parts diagram.
A photograph of the original part and the machine's identification plate may also help us identify it.
Order your Holzmann HOB260MINI spare parts from Probois Machinoutils to maintain your planer thicknesser, carry out an appropriate repair and extend the service life of your woodworking machine.
