Holzmann TK255 Circular Saw Spare Parts: Replacement Motor, Carbon Brushes and Dust Extraction Hose

Are you looking for spare parts for your Holzmann TK255 circular saw? At Probois Machinoutils, discover our selection of components designed to help you maintain and repair your machine.

The Holzmann TK255 is a mitre saw equipped with an upper table, allowing it to perform various woodworking operations. Like any electric woodworking machine, it may require certain components to be replaced during its service life.

A faulty motor, worn carbon brushes or a damaged dust extraction hose can affect its performance and make it more difficult to use.

To help you get your machine back into working condition, we offer several replacement parts suitable for this model.

Our selection includes a 230V replacement motor, a pair of motor carbon brushes and a 1.5 m dust extraction hose corresponding to position 228 on the exploded diagram.

These components allow you to repair different parts of your Holzmann TK255 circular saw, whether the problem concerns its motor or its dust extraction system.

Discover their functions and our recommendations for identifying the replacement part you actually need.

Which Holzmann TK255 Spare Parts Do We Offer?

Our category currently includes three replacement parts intended for the maintenance and repair of the Holzmann TK255 circular saw.

230V Replacement Motor for Holzmann TK255

This replacement motor is designed for the Holzmann TK255 circular saw.

It allows you to replace the original motor when a fault has been confirmed and repairing it is either impractical or uneconomical.

Pair of Motor Carbon Brushes for Holzmann TK255

Carbon brushes provide the electrical contact required for the motor to operate.

They are wear components that may need replacing after prolonged use.

They are supplied as a pair so that both motor brushes can be replaced together.

1.5 m Dust Extraction Hose for Holzmann TK255

This hose corresponds to position 228 on the exploded diagram.

It helps remove dust and wood chips generated during cutting operations.

Its length is 1.5 metres.

These three components perform very different functions. It is therefore important to identify the exact cause of a malfunction before ordering a replacement part.

230V Replacement Motor for Holzmann TK255 Circular Saw

The 230V motor for the Holzmann TK255 is one of the machine's main components.

It provides the mechanical power required to drive the saw blade.

When a motor develops a fault, several symptoms may appear, including starting difficulties, irregular operation, loss of power or complete failure to start.

However, these symptoms do not necessarily mean that the motor itself needs replacing.

A malfunction may also originate from an electrical component, a power supply problem or worn carbon brushes.

Before considering a complete motor replacement, it is therefore advisable to carry out a diagnosis.

If the motor is confirmed to be defective, replacing it may extend the service life of your circular saw without requiring you to purchase a new machine.

The motor offered in this category is intended for the 230V version of the Holzmann TK255.

When Should You Replace Your Holzmann TK255 Motor?

Several symptoms may indicate a motor-related problem.

The motor no longer starts

If your circular saw no longer starts, begin by checking the power supply and the machine's controls.

Starting problems can have several causes and do not necessarily mean that the motor has failed.

The motor has lost power

A loss of power may be associated with several factors, including worn carbon brushes, an electrical problem, overloading or a mechanical fault.

It is important to identify the cause before replacing the motor.

The motor produces an unusual smell

An overheating smell may indicate an electrical or mechanical problem.

In this situation, stop the machine immediately and disconnect it from the power supply.

Do not continue using it until the cause has been identified.

The motor makes unusual noises

Abnormal noises may originate from worn or damaged mechanical components.

A diagnosis is necessary to determine whether the motor should be repaired or replaced.

Once a motor failure has been confirmed, fitting a suitable replacement motor may allow you to put your Holzmann TK255 back into service.

Holzmann TK255 Motor Carbon Brushes: What Do They Do?

The carbon brushes for the Holzmann TK255 circular saw are electrical components required for the operation of its brushed motor.

They provide electrical contact between the stationary components and the motor's commutator.

During operation, the brushes remain in contact with the commutator. This friction gradually causes them to wear down.

Over time, they may become too short to perform their function correctly.

Excessively worn carbon brushes can cause starting difficulties, interruptions during operation or a loss of power.

They should therefore be inspected when the motor exhibits symptoms consistent with brush wear.

In this category, we offer a pair of replacement carbon brushes intended for the Holzmann TK255 circular saw.

Replacing both brushes at the same time avoids leaving a heavily worn brush installed alongside a new one.

How Can You Recognise Worn Motor Carbon Brushes?

Carbon brush wear can cause several symptoms.

Your Holzmann TK255 circular saw may become difficult to start or operate intermittently.

In some cases, the motor may lose power or stop unexpectedly.

Abnormal sparking around the commutator may also indicate a problem requiring inspection.

However, these symptoms can have other causes.

A power supply fault, a damaged commutator or an internal electrical problem may produce similar effects.

To confirm brush wear, their condition and length must be checked according to the manufacturer's instructions.

During this inspection, it is also advisable to examine the commutator if it is accessible.

If the commutator is severely damaged, simply replacing the carbon brushes may not be sufficient.

Why Should Both Motor Carbon Brushes Be Replaced Together?

Motor carbon brushes are normally subject to gradual wear during operation.

Even if one brush appears more worn than the other, replacing both at the same time is generally recommended.

This allows you to start again with two new components suited to the motor.

It also helps avoid having to carry out a second repair shortly after the first.

However, it is essential to choose carbon brushes with the correct dimensions and characteristics.

Brushes that look similar to the original components are not necessarily compatible.

Their shape, dimensions and connection system must match the motor concerned.

For your Holzmann TK255, we offer a pair of carbon brushes specifically intended for this model.

Before ordering, always check compatibility with the exact version of your machine.

1.5 m Dust Extraction Hose for Holzmann TK255: Position 228

The dust extraction hose for the Holzmann TK255, measuring 1.5 metres in length, corresponds to position 228 on the exploded diagram.

It helps remove dust and wood chips generated during cutting operations.

A properly maintained dust extraction system helps limit the accumulation of waste in the relevant areas of the machine.

It also makes it easier to keep your workspace clean.

Over time, a hose may become damaged through repeated handling, friction or mechanical stress.

A crack, tear or damaged connection may reduce extraction efficiency.

Replacing the hose can restore a suitable extraction connection, provided that the other components of the system are in good condition.

When Should You Replace Your Circular Saw's Dust Extraction Hose?

A damaged dust extraction hose may show several signs of wear.

These include cracks, holes or tears.

Significant deformation may also restrict the passage of air and dust.

If the hose no longer remains securely attached to its connections, inspect both the hose and its fastening components.

However, reduced extraction performance does not necessarily mean that the hose is defective.

A blocked duct, an unsuitable dust extraction system or another damaged component may also be responsible.

Before ordering a replacement hose, inspect the entire extraction circuit.

The hose offered in this category measures 1.5 metres and corresponds to position 228 on the Holzmann TK255 exploded diagram.

Your Holzmann TK255 Will Not Start: Is It the Motor or the Carbon Brushes?

When your circular saw refuses to start, you may be tempted to order a new motor immediately.

However, several checks may help you avoid unnecessary expenditure.

Begin by checking that the machine is receiving the correct electrical supply.

Next, inspect the controls and safety devices in accordance with the manufacturer's instructions.

If the power supply and controls are working correctly, checking the carbon brushes may be appropriate.

Severely worn brushes can prevent the motor from operating normally.

However, replacing them will not solve a fault caused by damaged motor windings or another internal problem.

It is therefore important to distinguish between a worn component that needs replacing and a failure requiring a more extensive repair.

If you are uncertain about the cause of the problem, have the machine inspected by a qualified professional.

All electrical work must be carried out with the machine disconnected from the power supply and in accordance with the relevant safety instructions.

Your Holzmann TK255 Has Lost Power: What Should You Check?

A loss of power during cutting can have several causes.

Before assuming that the motor is defective, inspect the condition of the saw blade.

A blunt blade or one that is unsuitable for the material being cut can considerably increase cutting resistance.

An excessive feed rate may also overload the motor.

If the blade is in good condition and the cutting conditions are appropriate, inspecting the motor's electrical components may be useful.

Worn carbon brushes can interfere with normal motor operation.

However, a loss of power may also result from other faults.

If the machine overheats, produces an unusual smell or repeatedly stops, discontinue use.

It is preferable to identify the exact cause before ordering replacement parts.

How to Maintain Your Holzmann TK255 Circular Saw

Regular maintenance helps preserve the proper operation of your circular saw.

Before carrying out any work, disconnect the machine from the power supply and wait until the blade has stopped completely.

Regularly remove sawdust and dust from accessible areas.

Inspect the condition of the blade and replace it if it shows significant wear or damage.

Also check that the protective devices and controls are functioning correctly.

Pay attention to any unusual noises coming from the motor.

If you notice starting difficulties or irregular operation, inspecting the carbon brushes may be necessary.

Finally, regularly inspect the dust extraction hose.

Make sure it has no cracks and that its connections remain securely attached.

Proper maintenance helps identify early signs of wear and allows you to take action before a problem becomes more serious.

How to Identify the Correct Spare Part for Your Holzmann TK255

Before ordering a motor, a pair of carbon brushes or a dust extraction hose, it is essential to identify your machine accurately.

We recommend recording the following information:

• Brand: Holzmann.

• Exact model: TK255.

• Serial number.

• Manufacturing month and year.

• Original part reference, if available.

• Position number on the exploded diagram, where indicated.

For the dust extraction hose offered in this category, the position number is 228 and its length is 1.5 m.

For the motor, check your machine's electrical voltage.

The model offered in this category is a 230V motor.

For the carbon brushes, make sure they correspond to the motor installed on your circular saw.

Do not rely solely on the visual similarity between two components.

IMPORTANT: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part product page. Where necessary, also check your machine's manufacturing month, manufacturing year and serial number.

These precautions help reduce ordering errors and ensure that you select a component suited to your equipment.

Why Repair Your Holzmann TK255 Instead of Replacing the Entire Machine?

A localised fault does not necessarily require you to replace your entire circular saw.

When the problem is caused by worn carbon brushes, replacing them may restore normal operation, provided that the motor has not suffered other damage.

If the motor itself is genuinely defective, installing a suitable replacement motor may extend the machine's service life.

Similarly, a damaged dust extraction hose can generally be replaced independently of the other components.

Repairing your machine therefore allows you to keep using your equipment when its overall condition justifies doing so.

However, an accurate diagnosis remains essential.

Replacing a component that is not responsible for the fault will not solve the problem.

Always follow the manufacturer's instructions when carrying out repairs and consult a qualified professional whenever necessary.

Order Your Holzmann TK255 Spare Parts from Probois Machinoutils

At Probois Machinoutils, discover our selection of spare parts for the maintenance and repair of your Holzmann TK255 circular saw.

We offer a 230V replacement motor, a pair of motor carbon brushes and a 1.5 m dust extraction hose corresponding to position 228.

These components allow you to repair different parts of your machine, from its motor to its dust extraction system.

Are you looking for another spare part for your Holzmann TK255?

Send us your machine's exact model, serial number, manufacturing date and, if possible, the position number of the required component on the exploded diagram to help us identify the correct part.

Probois Machinoutils: your specialist in Holzmann machine spare parts, helping you maintain, repair and extend the service life of your TK255 circular saw.