Plunge saw Scheppach PL55 with 2 rails of 700 mm
This Scheppach PL55 plunge saw is cut for the do-it-yourselfer, for carpentry or layout work. The plunging attack allows to cut in full panel, up to 55 mm thick.
Plunge circular saws have a blade that can go down into the wood. You adjust the depth of cut beforehand and then lower the blade gradually to the set depth.
Its second advantage lies in its precision, in fact its guide rail makes precise cuts directly on the tracing. The type of blade also affects the cut, in fact we must adapt its blade depending on the material to be cut, we must take into account its size and density. Its engine is capable of turning from 3000 to 6000 rpm.
This Scheppach PL55 plunge saw is cut for the do-it-yourselfer, for carpentry or layout work. The plunging attack allows to cut in full panel, up to 55 mm thick.
This plunge saw Scheppach PL75 is cut for the do-it-yourselfer, for carpentry or layout work. The plunging attack allows to cut in full panel, up to 75 mm thick.
Guide rail 1.40 m x 200 mm extra width for plunge saw Scheppach type CS55 and PL55 (delivered in the Scheppach mark in blue color)
Band of slide rail of the plunge circular saw
Anti-tip lock (to facilitate the cuts with the inclined saw)
Dust extraction system with 1000ml extraction capacity
Set of accessories for the Kity 550 and 750 or Scheppach CS55, PL55 and PL75 plunge saws
Diamond disc for plunge saw Scheppach PL285
Steel blade with 80 teeth lying teeth for Scheppach PL285 plunge saw.
24-tooth carbide blade for Scheppach PL285 plunge saw
Set of two TCT saw blades for the plunge circular saw double blade Holzmann DBS125.
Set of two diamond disk for the circular saw Holzmann DBS125.
Lot of 10 sticks of lubricants for circular saw Holzmann DBS125.
These 2 extensions length 320 mm will allow you to connect 2 to 3 rails for the Triton TTS1400 plunge circular saws exclusively!
This extension will allow you to connect 2 rails of 1500 mm or 700 mm together! For diving saws Kity 550 and 750 or Scheppach CS55, PL55 and PL75
Metabo FS 80 guide rail 800 mm for Metabo circular saws.
This Scheppach PL55 plunge saw is cut for the do-it-yourselfer, for carpentry or layout work. The plunging attack allows to cut in full panel, up to 55 mm thick.
2 Guide rail 700 mmx 200 mm extra width for plunge saw Scheppach type CS55 and PL55 (delivered in the Scheppach mark in blue color)