Filter By

Brand

Brand

Price

Price

  • €6.00 - €499.00

Availability

Availability

Active filters

Bernardo Bandsaw Spare Parts – Repair and Maintain Your Machine

Are you looking for Bernardo bandsaw spare parts to replace a worn, broken or faulty component? Discover our selection of replacement parts designed for the maintenance and repair of your woodworking bandsaw.

Bernardo bandsaws are used in woodworking and joinery workshops for straight cuts, curved cuts, ripping and various timber-cutting applications.

Their operation relies on several mechanical and electrical components, including the motor, drive belt depending on the model, wheels, bearings, blade guides, tensioning mechanisms and safety devices.

Over time and with regular use, certain components may wear out, become misaligned or require replacement.

At Probois Machinoutils, we offer a growing range of replacement parts for Bernardo bandsaws to help you repair your equipment, maintain its performance and extend its service life.

Spare Parts for the Bernardo HBS360 Bandsaw

The Bernardo HBS360 is a bandsaw designed for woodworking and timber-cutting applications.

Like any woodworking machine, it requires regular maintenance to maintain cutting accuracy and reliable operation.

Our catalogue includes a dedicated subcategory for Bernardo HBS360 spare parts.

Depending on the available references, you can search for components designed for the operation or maintenance of your machine.

We also offer a circle cutting attachment compatible with Bernardo HBS260, HBS320 and HBS360 bandsaws, allowing circular cuts to be made with the specified machines.

Before ordering, always check the exact model reference of your bandsaw and the compatibility of the required accessory or component.

Spare Parts for the Bernardo HBS400 Bandsaw

The Bernardo HBS400 also has a dedicated replacement parts subcategory.

This machine contains various mechanical assemblies involved in blade guidance, blade tensioning and power transmission.

During use, certain components may require inspection or replacement due to wear, accidental damage or malfunction.

Parts that may need attention include bearings, guiding components, adjustment mechanisms and electrical components, depending on the machine's design.

Please note: the Bernardo HBS400 and HBS400N are two different models. Their spare parts are not necessarily interchangeable.

It is therefore important to consult the exploded parts diagram corresponding to your exact machine model.

Spare Parts for the Bernardo HBS400N Bandsaw

The Bernardo HBS400N is one of the models for which we offer several replacement components.

Our catalogue includes:

  • 2200 W single-phase motor with pulley: designed for Bernardo HBS400N and HBS460N bandsaws, according to the specified motor reference.

  • A-1168Li drive belt: designed for the Bernardo HBS400N bandsaw.

  • 600 mm rip fence with two magnifying reading windows: helps guide timber during ripping operations.

  • 690 mm front rail: designed for mounting and adjusting the rip fence on the Bernardo HBS400N.

These components are involved in essential machine functions, including motor operation, power transmission, workpiece guidance and cutting adjustments.

Always check that the selected spare parts are compatible with your Bernardo HBS400N, particularly regarding the machine version and serial number.

Spare Parts for the Bernardo HBS460N Bandsaw

The Bernardo HBS460N also has a dedicated replacement parts subcategory.

Among the available components is a 2200 W single-phase motor with pulley, listed for the Bernardo HBS400N and HBS460N.

The motor is an essential part of the bandsaw, as it provides the power required to drive the cutting mechanism.

A motor malfunction may cause starting difficulties, reduced power or complete machine failure.

However, these symptoms do not necessarily mean that the motor itself is defective. Problems with the electrical supply, transmission system or controls may also be responsible.

Before replacing an electrical component, it is therefore important to identify the actual cause of the fault.

Motors and Drive Belts for Bernardo Bandsaws

The drive system plays an essential role in the operation of a Bernardo bandsaw.

On belt-driven models, the motor drives the lower bandsaw wheel through a suitable transmission belt.

A drive belt in good condition and with the correct tension helps transmit motor power consistently.

Our catalogue includes:

  • 2200 W single-phase motor with pulley for Bernardo HBS400N and HBS460N.

  • A-1168Li drive belt for Bernardo HBS400N.

  • Drive belt for Bernardo HBS260, also listed for the Holzmann HBS245HQ.

A worn, loose or damaged drive belt may cause slipping, unusual noises or inefficient power transmission.

When replacing a belt, it is important to match the original reference and dimensions.

A belt of a similar length is not necessarily compatible if its profile or other specifications differ.

Rip Fences and Rails for Bernardo Bandsaws

A bandsaw rip fence helps maintain a consistent distance between the blade and the workpiece during ripping and straight cutting operations.

A correctly adjusted fence contributes to more consistent and accurate cuts.

For the Bernardo HBS400N, we offer:

  • A 600 mm rip fence equipped with two magnifying reading windows.

  • A 690 mm front rail designed for the fence guidance system.

These components may require replacement if the fence is damaged, a fastening component breaks or the sliding mechanism no longer operates correctly.

A fence with excessive play or one that cannot be securely locked may affect cutting accuracy.

Before ordering, check the dimensions and mounting points to ensure that the part matches your machine.

Bearings and Mechanical Components for Bernardo Bandsaws

Bandsaw bearings contribute to the operation of the machine's rotating mechanical assemblies.

Depending on their location, they may support wheel rotation or the guidance of certain components.

Our catalogue includes a 6201 bearing, which is also used on certain other machines.

When a bearing becomes worn or damaged, several symptoms may appear:

  • Unusual rotational noise.

  • Excessive vibration.

  • Excessive mechanical play.

  • Irregular rotation.

  • Abnormal heating of the component.

These symptoms may also be caused by other mechanical components.

Before replacing a bearing, it is important to identify the correct part and check its dimensions and reference.

A bearing should not be selected solely by its outside diameter: its other dimensions and specifications must also match.

Which Components May Need Replacing on a Bernardo Bandsaw?

A Bernardo bandsaw contains numerous components that may require inspection, maintenance or repair.

Common types of replacement parts include:

  • Electric motors: provide the power required to drive the machine and move the saw blade.

  • Drive belts: transmit motor power on machines equipped with a belt-drive system.

  • Bearings: contribute to smooth rotation of mechanical assemblies.

  • Blade guides: help support and guide the blade during cutting.

  • Bandsaw wheel tyres: provide the contact surface between the blade and the wheels on applicable machines.

  • Blade tensioning mechanisms: allow the bandsaw blade tension to be adjusted.

  • Rip fences and rails: help guide workpieces and adjust cutting widths.

  • Switches and electrical components: contribute to machine control and operation.

  • Handwheels and adjustment mechanisms: allow the settings required for machine operation.

  • Guards and safety devices: help reduce risks during sawing operations.

This list describes common components found on woodworking bandsaws.

Availability and compatibility depend on the exact machine model and version.

How to Identify the Correct Spare Part for Your Bernardo Bandsaw

Before ordering a Bernardo bandsaw replacement part, several checks are recommended.

1. Identify the exact machine model

Check the identification plate on your bandsaw to determine its precise reference: HBS360, HBS400, HBS400N, HBS460N or another model.

2. Check the serial number

Some machines may have undergone technical modifications during their production period.

The serial number can help distinguish between different versions of the same model.

3. Consult the exploded parts diagram

An exploded diagram allows you to identify the machine's components and locate the item number corresponding to the required spare part.

4. Compare the technical specifications

Check dimensions, mounting points, electrical specifications and any references marked on the original component.

5. Contact us if you are unsure

If you cannot find the required part, please provide the exact model of your Bernardo bandsaw, its serial number and the item number shown on the exploded parts diagram.

This information will help us review your request more efficiently.

When Should You Replace a Part on a Bernardo Bandsaw?

Certain malfunctions may indicate that a component of your Bernardo bandsaw needs inspection.

Common symptoms include:

  • The machine no longer starts or has difficulty starting.

  • The motor runs, but the blade does not move correctly.

  • The bandsaw produces unusual vibrations or noises.

  • The blade wanders or does not remain correctly positioned on the wheels.

  • The blade tensioning mechanism no longer operates properly.

  • The blade guides show significant wear.

  • The rip fence can no longer be securely locked.

  • A bearing develops excessive play or abnormal noise.

  • A drive belt is cracked, loose or damaged.

  • A guard or safety device is damaged.

These symptoms alone are not sufficient to identify a defective component.

For example, a bandsaw that does not cut straight may have an issue with blade tension, blade guide adjustment, blade sharpness or blade selection, without necessarily requiring the replacement of a mechanical component.

Always disconnect the machine from the electrical supply before carrying out any maintenance or repair work. Electrical repairs and work on safety devices should be performed by a suitably qualified person.

How to Maintain Your Bernardo Bandsaw and Extend Its Service Life

Regular maintenance helps preserve the performance and cutting accuracy of your Bernardo bandsaw.

Recommended maintenance practices include:

  • Regularly clean the inside of the machine to remove sawdust and wood chips.

  • Check the condition of the bandsaw wheel tyres.

  • Inspect blade tension and blade tracking.

  • Check the adjustment of the blade guides and guide bearings.

  • Inspect the condition and tension of the drive belt when fitted.

  • Check the tightness of screws and fastening components.

  • Ensure that rip fences and adjustment mechanisms operate correctly.

  • Use a blade suitable for the type of wood and the cutting operation.

  • Make sure the dust extraction system is working properly.

  • Watch for unusual vibrations, noises or overheating.

A properly maintained machine helps reduce premature component wear and preserve cutting quality.

Why Buy Bernardo Bandsaw Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we understand that a mechanical or electrical breakdown can quickly put an essential woodworking machine out of service.

That is why we are continuously developing our range of Bernardo bandsaw spare parts to make maintenance and repairs easier.

By choosing Probois Machinoutils, you benefit from:

  • A dedicated category for Bernardo bandsaw spare parts.

  • Specific subcategories for the Bernardo HBS360, HBS400, HBS400N and HBS460N.

  • Replacement components such as motors, drive belts, rip fences, rails and bearings.

  • A selection of parts for different repair requirements.

  • A growing range of spare parts.

  • Assistance with identifying components compatible with your machine.

  • The experience of a specialist in woodworking machinery and replacement parts.

Looking for a part that is not yet listed in our catalogue?

Please provide the exact model of your Bernardo bandsaw and the corresponding item number from its exploded parts diagram. We can review your request and check possible sourcing options.

Explore our spare parts for Bernardo HBS360, HBS400, HBS400N and HBS460N bandsaws and extend the service life of your machine with suitable replacement components.