Spare Parts for Holzmann TS315VF-2000 Sliding Table Saw with 2000 mm Sliding Table

Are you looking for spare parts for your Holzmann TS315VF-2000 sliding table saw? At Probois Machinoutils, discover our selection of components designed to help you maintain and repair your table saw equipped with a 2000 mm sliding table.

The Holzmann TS315VF is a woodworking machine designed for cutting timber and wood-based panels. Its sliding table makes it easier to move and guide workpieces during cutting operations.

Like any woodworking machine, it contains mechanical and electrical components that may wear out or require replacement over time.

Our selection includes 737LI and 914J7 drive belts, 230V and 400V replacement motors, a KJD18 switch, a saw blade flange, its retaining nut and various fence components.

Discover the functions of these spare parts, the main signs of wear and the precautions you should take to identify the correct component before ordering.

Which Spare Parts Are Available for the Holzmann TS315VF-2000?

Our category includes several types of spare parts designed for different mechanisms on the machine.

Drive system components

You will find a 737LI V-belt and a 914J7 Poly-V belt intended for the scoring blade drive system.

Motor and electrical components

We offer two separate replacement motors, one for 230V machines and the other for 400V machines, as well as a KJD18 switch intended for compatible three-phase machines.

Saw blade mounting components

A saw blade flange, exploded-view position C2, and its retaining nut, position C1, are also available.

Fence and adjustment components

Our selection includes a mitre fence locking knob and a locking plate, position D-36, for the rip fence.

These components perform different functions. Before ordering, it is essential to check the exact reference of the required part and your machine's configuration.

737LI V-Belt for Holzmann TS315VF-2000

The 737LI V-belt is intended for the drive system of the Holzmann TS315VF-2000 sliding table saw.

It transmits movement between the pulleys of the relevant mechanism.

Over time, a belt may deteriorate due to mechanical stress, unsuitable tension or normal wear.

A worn belt can cause unusual noises, vibrations or irregular power transmission.

It is therefore important to inspect its condition regularly during maintenance.

When should you replace the 737LI belt?

Replacement may be necessary if the belt develops cracks, becomes deformed, shows significant wear or has visible damage to its contact surfaces.

If you notice unusual noises coming from the drive system, also check the condition and alignment of the pulleys.

Before ordering, always check the markings on your original belt.

The 737LI reference must match the component you need to replace.

A belt with approximately the same length is not necessarily compatible.

914J7 Poly-V Belt for the Holzmann TS315VF-2000 Scoring Blade

The 914J7 Poly-V belt, also designated 360J, is intended for the scoring blade drive system of the Holzmann TS315VF-2000.

A scoring blade is used on certain sliding table saws to make a preliminary cut before the main blade passes through the material.

When correctly adjusted, it helps reduce chipping on the underside of coated panels, particularly when cutting melamine-faced boards.

Its drive system must operate correctly to ensure consistent cutting.

The 914J7 belt transmits the movement required to operate this device.

Over time, it may become worn or damaged.

When should you replace the scoring blade belt?

If the scoring blade is difficult to operate, produces unusual noises or runs irregularly, the belt may need inspecting.

However, these symptoms may also be caused by other components within the mechanism.

Before ordering, check the reference printed on your original belt.

Important: The 914J7 Poly-V scoring blade belt and the 737LI V-belt are intended for two different mechanisms. They are not interchangeable.

230V Motor for Holzmann TS315VF-2000 Sliding Table Saw

The 230V replacement motor for Holzmann TS315VF-2000 is intended for the corresponding version of this sliding table saw.

The motor is one of the machine's main components, providing the mechanical power required to operate the cutting system.

A defective motor can cause starting difficulties, loss of power, unusual noises or excessive overheating.

However, these symptoms do not necessarily mean that the motor needs replacing.

An electrical fault, a drive system problem or a mechanical blockage can also interfere with the machine's operation.

An accurate diagnosis is therefore essential before ordering a replacement motor.

In particular, check your machine's supply voltage and the specifications shown on the original motor's rating plate.

The 230V motor must not be confused with the 400V version offered in the same category.

400V Motor for Holzmann TS315VF-2000 Sliding Table Saw

We also offer a 400V replacement motor for the Holzmann TS315VF-2000.

This motor is intended for the corresponding three-phase version of the machine.

Before ordering, always check the supply voltage and the technical specifications of the original motor.

Two machines with similar commercial model names may be equipped with different motors.

It is therefore important not to select a motor based solely on the machine's model name.

In the event of a breakdown, electrical inspections must be carried out by someone with the necessary qualifications.

Inspecting the drive system may also help determine whether the malfunction is actually caused by the motor.

The 230V and 400V motors are two separate references. Select only the motor that matches your machine's electrical configuration.

Saw Blade Flange, Position C2, for Holzmann TS315VF-2000

The saw blade flange, position C2, is a component of the main blade mounting system on the Holzmann TS315VF-2000.

It helps position and secure the blade on its shaft.

A flange in good condition is essential for ensuring that the blade is installed in accordance with the manufacturer's instructions.

If it is damaged, deformed or shows abnormal signs of wear, replacement may be necessary.

A deteriorated flange can affect the correct positioning of the blade.

When replacing a circular saw blade, it is advisable to inspect the contact surfaces and mounting components.

Before carrying out any work, disconnect the machine from the power supply and wait until the blade has stopped completely.

Never use a flange whose dimensions or specifications do not match those of the original component.

Blade Flange Retaining Nut, Position C1, for Holzmann TS315VF-2000

The blade flange retaining nut, position C1, is intended for the blade mounting system of the Holzmann TS315VF-2000.

It forms part of the assembly used to secure the blade.

A nut with damaged threads, deformation or significant signs of wear may need replacing.

Damaged mounting components can compromise the correct installation of the blade.

It is therefore essential to inspect their condition during maintenance.

Before ordering this nut, check its reference and position on your machine's exploded diagram.

During reassembly, follow the manufacturer's instructions regarding component positioning and tightening.

Never use a replacement nut whose specifications do not match those of the original part.

KJD18 400V Switch for Three-Phase Machines

The KJD18 400V switch offered in this category is intended for compatible three-phase machines.

It forms part of the electrical control system.

A defective switch may prevent the machine from starting or cause operating difficulties.

However, a starting problem is not necessarily caused by the switch.

Other electrical components may also be responsible for the fault.

Before ordering, it is essential to check the original switch reference, its electrical specifications and its connection configuration.

Important: A 400V switch intended for a three-phase machine must not be assumed to be compatible with a 230V single-phase machine.

All work on the electrical system must be carried out with the power disconnected by a qualified person.

Mitre Fence Locking Knob for Holzmann TS315VF

The mitre fence locking knob is an original Holzmann spare part intended for the mitre fence adjustment system.

It secures the selected angle setting of the corresponding fence.

This component is offered for Holzmann TS315VF sliding table saws equipped with 2000, 2600 or 3200 mm sliding tables.

A damaged locking knob may prevent the fence from remaining securely in the required position.

If the knob is broken or its locking mechanism is damaged, replacement may be necessary.

Before ordering, check that the problem actually originates from the knob rather than another component of the adjustment mechanism.

Also check compatibility with your specific TS315VF version.

Locking Plate D-36 for Holzmann TS315VF Rip Fence

The Holzmann locking plate, position D-36, is intended for the rip fence of the TS315VF-2000 sliding table saw.

It forms part of the fence locking system.

The rip fence is used to maintain a specified cutting distance during rip-cutting operations.

It must be correctly positioned and securely locked before each use.

A damaged or worn locking plate may prevent the fence from being held securely.

If your rip fence moves when it should be locked, it is important to inspect the entire mechanism.

Incorrect adjustment or another damaged component may also be responsible.

The plate offered in this category corresponds to exploded-view position D-36.

Before ordering, check this reference on your machine's exploded diagram.

Your Holzmann TS315VF-2000 Is No Longer Cutting Accurately: What Should You Check?

A sliding table saw that produces irregular or inaccurate cuts does not necessarily have a major mechanical fault.

Several factors may be responsible.

Start by checking the condition of the main blade.

A blunt, damaged or unsuitable blade can result in poor cutting quality.

Next, check the positioning and locking of the rip fence.

An incorrectly adjusted fence can compromise cutting accuracy.

If you use the scoring blade, also make sure that its settings are appropriate for the main blade and the material being cut.

Incorrect scoring blade alignment or adjustment may cause finishing defects on panels.

Finally, check that the sliding table moves correctly and does not have excessive play.

Your TS315VF-2000 Scoring Blade Is Not Working Properly: Should You Replace the Belt?

A scoring blade malfunction can have several causes.

The 914J7 Poly-V belt may be responsible if it is worn or damaged.

However, operating problems may also result from other mechanical components or incorrect adjustment.

If you notice unusual noises, vibrations or irregular cutting, stop using the machine.

Disconnect it from the power supply before carrying out the necessary inspections.

Check the condition of the belt, the drive system components and the scoring blade adjustment.

It is important to identify the exact cause of the problem before ordering a replacement part.

How to Maintain Your Holzmann TS315VF Sliding Table Saw with 2000 mm Sliding Table

Regular maintenance helps preserve the performance and accuracy of your sliding table saw.

Before carrying out any work, disconnect the machine from the power supply and wait until both blades have stopped completely.

Regularly clean accessible areas to prevent excessive sawdust and dust accumulation.

Check the condition of the blades and their mounting components.

Also inspect the fences, locking devices and sliding table to ensure they operate correctly.

Pay particular attention to the drive systems.

A damaged belt must be replaced with a reference that matches the specifications of the original component.

Finally, watch for unusual noises, vibrations or changes in the machine's behaviour.

Prompt attention to a defective component may help prevent more extensive damage.

How to Identify the Correct Spare Part for Your Holzmann TS315VF-2000

Before ordering a component, it is essential to identify your machine accurately.

We recommend recording the following information:

• Brand: Holzmann.

• Exact model: TS315VF.

• Version: 2000 mm sliding table.

• Supply voltage: 230V or 400V.

• Serial number.

• Manufacturing month and year.

• Original part reference.

• Position number on the exploded diagram, where indicated.

For the belts, always check the 737LI and 914J7 references, depending on the mechanism concerned.

For the blade mounting components, check positions C1 and C2.

For the rip fence locking plate, check position D-36.

IMPORTANT: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also check your machine's manufacturing month, manufacturing year and serial number.

Some components may be shared by several TS315VF versions, while others are specific to the model equipped with a 2000 mm sliding table.

Never assume that a part is compatible simply because it looks similar to the original component.

Why Repair Your Holzmann TS315VF-2000 Instead of Replacing the Entire Machine?

A localised fault does not necessarily require replacing your entire sliding table saw.

When a malfunction is caused by a worn belt, a damaged mounting component or a defective locking mechanism, replacing the affected part may allow you to repair the machine.

Repairing your equipment can therefore help extend its service life.

However, an accurate diagnosis is essential before ordering.

Replacing a component that is not responsible for the malfunction will not solve the problem.

For electrical components and safety devices, follow the manufacturer's instructions and consult a qualified professional whenever necessary.

Order Your Holzmann TS315VF-2000 Spare Parts from Probois Machinoutils

At Probois Machinoutils, discover our selection of spare parts for maintaining and repairing your Holzmann TS315VF sliding table saw equipped with a 2000 mm sliding table.

We offer 737LI and 914J7 belts, 230V and 400V replacement motors, a KJD18 switch, a saw blade flange, its retaining nut, a mitre fence locking knob and a rip fence locking plate.

Before ordering, make sure you select the part that matches your machine's exact configuration.

Are you looking for another component for your Holzmann TS315VF-2000?

Send us your saw's exact model, supply voltage, serial number, manufacturing date and, if possible, the position number of the required component on the exploded diagram.

This information will help us identify the correct part for your machine.

Probois Machinoutils: your specialist in Holzmann machine spare parts, helping you maintain, repair and extend the service life of your TS315VF-2000 sliding table saw.