The 180-190 mm diameter carbide circular saw blade is designed for those looking for increased performance from machines capable of handling this diameter. It allows for wider, deeper cuts, while maintaining high precision and cutting quality thanks to the carbide tipped blade. The Probois Machinoutils range includes several models with bores from 20 to 30 mm, varying thicknesses and tooth counts, suitable for both sawing and finishing, or for mixed wood/light metal applications.

These blades can often be used on portable saws, table saws, or radial arm saws, provided the blade holder supports a 180 to 190 mm blade and the bore is compatible. Products include blades with alternating or trapezoidal teeth, finished to limit splintering or for very clean finishes, as well as saw blades for quickly cutting sections of wood. Probois Machinoutils also offers premium sets or models for intensive use. For example, there are 190 mm diameter blades with 24 teeth for fast cutting, or 40 to 48 teeth for finishing.

Criteria to check when choosing a 180-190 mm diameter blade

Here are the essential elements to consider :

• Diameter compatibility : Your saw must be able to accept a 180-190 mm blade. Make sure the cutting capacity, protective shield, and depth of cut allow for this.
• Bore : Often 20 or 30 mm for this diameter. An unsuitable bore causes vibration, overheating, or poor edge retention.
• Number of teeth and geometry : Few teeth (e.g., 24) for fast cutting, more (40-48) for fine cuts or finishing. The tooth type (alternating, trapezoidal, negative) influences sharpness, chip direction, noise, and cutting speed.
• Blade thickness : The thicker the blade, the more rigid it is but the more power it consumes. Typical thicknesses for this diameter vary depending on the application (cutting vs. finishing).
• Specific use : If you need to cut light metal, work on site with nails, or achieve a clean cut on hardwood, some blades are treated or designed to be "resistant," with suitable teeth and carbide.

In summary, the Ø180-190 mm carbide circular saw blade category at Probois Machinoutils offers a wide range to meet your cutting and finishing needs. By choosing according to these criteria, you will obtain a high-performance, durable blade that is adapted to your machine.