Hinge bracket for scroll saw Kity SAC405F and Scheppach Decoflex
Hinge bracket for scroll saw Kity SAC405F and Scheppach Decoflex
Hinge bracket for scroll saw Kity SAC405F and Scheppach Decoflex
Air hose for scroll saw Scheppach SD1600V
Plate for scroll saw Scheppach SD1600V - Item 17
Quick clamp holder for saw blades without cross pin for scroll saw Scheppach
Light plate for scroll saw Scheppach SD1600V
Complete rod marks 73 + 74 + 78 + 81 + 84 + 91 + 117 for scroll saw Scheppach SD1600V
Bellows for scroll saw Scheppach SD1600V
Inverter for scroll saw Scheppach SD1600V
Blade holder support for Scheppach SD1600V scroll saw - Item 1
Blade holder bottom 88002173 for scroll saw
Set of 2 pliers for the Kity SAC405F and Scheppach Decoflex scroll saws.
Blade holder top 88002172 for scroll saw
This original foam damping ring eliminates vibration and play at the upper pivot arm of your scroll saw. It helps ensure smooth, quiet operation while maintaining the correct movement of the saw arm.
Are you looking for a spare part for your Parkside PDS 120 B3 scroll saw to repair a fault, replace a worn component or extend the service life of your machine? At Probois Machinoutils, we offer a selection of replacement parts for the maintenance and repair of this scroll saw, also known by the reference PDS120B3.
The Parkside PDS 120 B3 scroll saw is designed for fine cutting, model making, creative hobbies and woodworking. It allows users to create curves, decorative shapes and intricate cuts in various materials suitable for the machine's cutting capacity.
Over time, certain components may wear out or develop faults. An electronic malfunction, blade fastening problem, inefficient air-blowing system or wear in the oscillating mechanism may require the replacement of a specific part.
Our catalogue includes electronic circuit boards, speed controllers, blade holders, blade clamps, table inserts, bellows, air tubes and mechanical components designed for compatible scroll saws.
The Parkside PDS 120 B3 scroll saw operates using a mechanism that converts the motor's movement into the reciprocating movement of the blade. Several components contribute to securing the blade, adjusting the speed and ensuring the machine operates correctly.
To make finding a replacement part easier, our selection includes different types of components:
The parts offered may also be suitable for certain Scheppach, Woodstar, Kity, Dexter or Mac Allister scroll saws, provided that the compatibility information on each product page is checked.
The electronic circuit board for Parkside scroll saws is one of the electrical components involved in the operation and control of the machine.
A fault in this circuit board may cause operating problems or prevent the machine from starting correctly. However, an electrical problem does not necessarily mean that the circuit board is defective.
We offer an electronic circuit board, reference 5901403005, corresponding to position 17 on certain exploded parts diagrams for Scheppach, Parkside, Dexter and Mac Allister scroll saws.
Before ordering this part, it is essential to check the original reference and make sure that the exact model of your scroll saw appears in the list of compatible machines.
Replacement of an electronic circuit board must be carried out by a qualified person after completely disconnecting the machine from the power supply.
The electronic speed controller for the Parkside PDS 120 B3 scroll saw is part of the system used to adjust the cutting speed.
Speed adjustment allows the blade movement to be adapted to the material being worked, its thickness and the complexity of the cuts.
Our catalogue includes an electronic speed controller, reference 5901403011, designed for various Scheppach, Woodstar, Parkside, Dexter and Mac Allister scroll saws.
When the speed can no longer be adjusted normally, several causes should be considered: a faulty controller, connection problems, a control malfunction or failure of another electrical component.
A diagnosis is therefore necessary before carrying out any work. The exact compatibility of the speed controller with your machine version must also be checked.
The blade holder for Parkside scroll saws is an essential component for keeping the blade securely in place during cutting operations.
Correct blade fastening helps maintain suitable tension and limits unwanted blade movement during operation.
A damaged, deformed or worn blade holder may cause fitting difficulties, poor blade retention or cutting accuracy problems.
We offer several blade holder references:
These references are not necessarily interchangeable. Upper and lower blade holders may have different shapes and functions depending on the machine's design.
Before replacing a holder, check its position, fastening system and correspondence with the original component.
Blade clamps for pinless scroll saw blades are designed to secure certain types of blades in the fastening system specified by the manufacturer.
Pinless blades are particularly useful for scroll sawing tasks requiring fine and precise cuts. Their fastening system must be perfectly suited to the machine to ensure proper blade retention during operation.
We offer a set of two blade clamps, reference 88002728, listed for certain Kity, Scheppach and Woodstar scroll saws.
These clamps may need replacing if they show significant wear, deformation or damage that prevents the blade from being held securely.
Please note that their presence in this category does not guarantee compatibility with every Parkside PDS 120 B3. Always check the list of compatible machines before ordering.
The table insert for Parkside scroll saws is positioned in the worktable around the opening through which the blade passes.
It helps provide a suitable supporting surface close to the cutting area and reduces the open space around the blade.
We offer a table insert, reference 5901403008, which replaces the previous reference 5901403039.
This part is designed for various Scheppach, Woodstar, Parkside, Dexter and Mac Allister scroll saws according to the compatibility information.
A cracked, broken, deformed or missing table insert may need replacing to restore a suitable working surface.
Before purchasing, check the shape and dimensions of the component as well as its compatibility with your machine's worktable.
The air-blowing system of the Parkside PDS 120 B3 scroll saw helps clear sawdust produced during cutting operations.
This system improves visibility of the cutting line and makes it easier to follow the marked outline, particularly when producing tight curves or intricate shapes.
Our selection includes two components:
Cracked, torn or deformed bellows may reduce the effectiveness of the system. Similarly, a damaged, blocked or incorrectly positioned air tube may prevent sawdust from being cleared properly.
Before replacing these components, it is advisable to inspect their condition and check for obstructions.
The rod for Parkside scroll saws forms part of the mechanical system responsible for the blade's reciprocating movement.
Our catalogue includes a complete rod, reference 5901403015, corresponding to positions 73, 74, 78, 81, 84, 91 and 117 on certain scroll saw exploded parts diagrams.
This reference is offered for various Scheppach, Woodstar, Dexter, Parkside and Mac Allister machines, according to the compatibility information provided on the product page.
Wear in the mechanism may cause abnormal vibrations, unusual noises or irregular blade movement.
Before replacing the rod, check the joints, fasteners and other associated components to determine the precise cause of the malfunction.
The hinge bracket for scroll saws is a mechanical component used on certain machines to support or provide a pivoting connection for part of the mechanism.
We offer a hinge bracket, reference 88000059, listed for certain Kity, Scheppach and Woodstar scroll saws.
A cracked, deformed or excessively worn bracket may interfere with the operation of the corresponding joint.
It is important to compare the original component with the replacement part and consult the compatible model list. A part designed for a Scheppach or Woodstar scroll saw is not automatically suitable for every Parkside version.
The foam cushioning ring for scroll saws helps reduce vibrations and mechanical play around the upper oscillating arm shaft on machines equipped with this component.
We offer a cushioning ring, reference 88000028, designed for certain scroll saw mechanisms.
Over time, this ring may become deformed, deteriorate or lose some of its cushioning properties due to repeated movement.
Increased vibrations, mechanical noises or unusual play around the joint may justify inspecting this component.
Before ordering, check the dimensions, position and compatibility of the cushioning ring with your machine.
Before purchasing a spare part for the Parkside PDS120B3 scroll saw, it is essential to identify your machine accurately.
The Parkside range includes the PDS 120 A1, PDS 120 B2 and PDS 120 B3 models. These different versions may have differences in their electrical components, blade holders and mechanisms.
A part compatible with the PDS 120 A1 or PDS 120 B2 is therefore not necessarily suitable for the PDS 120 B3.
To avoid ordering errors, we recommend the following checks:
IMPORTANT: BEFORE PURCHASING, CHECK THE EXACT MODEL OF YOUR MACHINE, ITS MONTH AND YEAR OF MANUFACTURE, AND ITS SERIAL NUMBER. ALWAYS CONSULT THE LIST OF COMPATIBLE MACHINES ON EACH PRODUCT PAGE.
Several symptoms may indicate that a component of your Parkside PDS 120 B3 scroll saw needs inspection.
A machine that no longer starts, irregular speed, a blade that is difficult to secure or abnormal vibrations may have several different causes.
A blade fastening problem may result from a worn holder, damaged clamp, incorrect installation or an unsuitable blade.
An air-blowing problem may be related to damaged bellows or a blocked air tube.
Similarly, unusual mechanical noise may originate from a joint, fastening component or part of the oscillating mechanism.
It is therefore advisable to diagnose the problem before replacing a component to identify the actual cause and avoid unnecessary purchases.
Regular maintenance helps preserve the accuracy and proper operation of your Parkside scroll saw.
After each use, remove dust and sawdust accumulated around the worktable, blade and accessible areas of the mechanism.
Regularly check the condition of the blade, its fastening and tension. An incorrectly installed or insufficiently tensioned blade may affect cutting quality and cause vibrations.
Also check the operation of the air-blowing system and make sure that the air tube is correctly positioned.
If unusual noises or significant vibrations occur, stop the machine and inspect accessible mechanical components according to the manufacturer's instructions.
Before cleaning, inspecting or repairing the machine, disconnect it from the power supply and wait until all moving parts have come to a complete stop.
Work involving the electronic circuit board, speed controller and other electrical components must be carried out by a qualified person. Safety devices must never be modified or disabled.
At Probois Machinoutils, we offer a selection of spare parts for the Parkside PDS 120 B3 scroll saw to make maintaining and repairing your machine easier.
Our catalogue includes electrical components, blade holders, blade clamps, air-blowing system parts and various components of the oscillating mechanism.
Certain references may also be suitable for Scheppach, Woodstar, Kity, Dexter or Mac Allister scroll saws, but only when this compatibility is expressly stated on the relevant product page.
Our selection evolves according to component availability and the repair needs of scroll saw users.
Discover our replacement parts for Parkside PDS120B3 scroll saws: electronic circuit boards, speed controllers, blade holders with or without pins, blade clamps, table inserts, bellows, air tubes, complete rods, hinge brackets and cushioning rings.
Before ordering, carefully check the references and compatibility information to select the correct component for your machine and help extend its service life under appropriate operating conditions.