Discover our selection of spare parts for the Holzmann ABS1080 dust collector and maintain your woodworking dust extraction system.

The Holzmann ABS1080 is designed to collect wood chips and some of the dust generated during sawing, jointing, thicknessing and other woodworking operations.

Over time, certain components may wear out or become damaged. A torn filter bag, damaged impeller or faulty motor can reduce extraction performance and disrupt work in your workshop.

At Probois Machinoutils, we offer a range of replacement parts for maintaining and repairing this dust collector, including steel impellers, single-phase motors, filter bags, collection bags, filter cartridges, switches and fastening accessories.

This category also includes certain parts listed as compatible with other dust collectors, including the Bernardo DC230.

However, it is essential to check the compatibility of each individual part before ordering.

Holzmann ABS1080 Dust Collector: Technical Specifications

The Holzmann ABS1080 is a mobile dust collector designed for woodworking workshops and users of compact woodworking machines.

Its 750 W motor and steel impeller generate the airflow required to transport wood chips into a collection bag with a capacity of 100 litres.

The machine is available in single-phase 230 V and three-phase 400 V versions.

The main technical specifications of the 230 V version are as follows:

Model: Holzmann ABS1080.

Machine reference: HABS1080-230V.

Power supply: 230 V / 50 Hz.

Motor power S1: 750 W.

Motor power S6: 1000 W.

Rotational speed: 2950 rpm.

Airflow capacity: 1080 m³/h.

Negative pressure: 1020 Pa.

Dust extraction connection diameter: 100 mm.

Collection bag capacity: 100 litres.

Bag diameter: 375 mm.

Plastic bag length: 1060 mm.

Impeller diameter: 230 mm.

Net weight: 23 kg.

These specifications help identify the machine and select the appropriate replacement parts.

Important: Electrical components may differ between the 230 V and 400 V versions. A single-phase motor intended for the 230 V version must not be ordered for a three-phase machine without verifying compatibility.

Ø 230 mm Steel Impeller for the Holzmann ABS1080

The impeller is one of the essential components of the dust extraction system.

Driven by the electric motor, it generates the airflow needed to transport wood chips and dust from the woodworking machine to the collection bag.

This category includes a steel impeller for the Holzmann ABS1080 dust collector, with the following specifications:

Outside diameter: 230 mm.

Height: 85 mm.

Bore: 16 mm.

Mounting: Keyway.

This impeller is also listed for several other dust collectors:

• Bernardo DC230.

• Holzmann ABS1500FF.

• Leman LOASP060.

• Jean l'Ébéniste FM230.

Nevertheless, compatibility must be checked individually, particularly according to the machine version and manufacturing date.

When should the impeller be replaced?

An impeller may require replacement if its blades are broken, cracked or deformed, or if its attachment to the motor shaft is damaged.

Significant vibrations or metallic noises may also indicate an impeller problem.

If this happens, stop the dust collector immediately and disconnect it from the power supply before inspecting it.

It is important to check whether the fault also involves the motor shaft, housing or a fastening component.

750 W Single-Phase Motor for the Holzmann ABS1080

The electric motor drives the impeller and generates the airflow required for dust extraction.

We offer a 750 W single-phase motor for the Holzmann ABS1080 and Bernardo DC230 dust collectors.

This component is intended to replace a faulty original motor on a compatible machine.

However, a motor that no longer starts should not automatically be replaced without a preliminary diagnosis.

Several components may be responsible for the malfunction, including the power supply, switch, capacitor where fitted, wiring or a mechanical blockage of the impeller.

When should the motor be replaced?

Replacement may be considered when a diagnosis confirms an internal fault, damaged winding or a failure that cannot be repaired under suitable conditions.

Before ordering, always check the supply voltage, power rating, mounting dimensions and machine reference.

This single-phase motor must not be assumed to be compatible with the 400 V version of the ABS1080.

Electrical repairs must be carried out by a qualified person with the dust collector disconnected from the power supply.

FP1 Ø 370 mm Filter Cartridge for the Holzmann ABS1080

The FP1 filter cartridge with a diameter of 370 mm is offered as a filtration accessory for the Holzmann ABS1080 dust collector.

It allows the upper filtration system to be replaced with a cartridge, provided that the product's installation requirements and specifications are respected.

A filter cartridge in good condition helps retain particles carried by the airflow and limit their release into the workshop.

It is an option for users who wish to equip their dust collector with a filtration system different from the original fabric bag.

When should a filter cartridge be replaced?

Replacement may be necessary if the filter media is torn, damaged or deformed.

A heavily clogged cartridge may also cause a reduction in extraction performance.

However, it should first be maintained according to the manufacturer's recommendations before concluding that replacement is necessary.

Before purchasing, check the 370 mm diameter, mounting system and exact compatibility with your dust collector.

Ø 370 mm Felt Filter Bag for Dust Collectors

The 370 mm diameter felt filter bag is designed to filter the air in a compatible dust collector.

Installed on the upper section of the collection system, it allows air to pass through while retaining some of the extracted particles.

A filter bag in good condition contributes to the proper operation of the dust collector.

If it is punctured, torn or incorrectly secured, dust may escape into the working environment.

When should the felt filter bag be replaced?

Replacement may be necessary in the following situations:

• Torn or punctured fabric.

• Damaged seams.

• Significant deformation.

• Inadequate attachment.

• Persistent clogging despite appropriate maintenance.

Before ordering, check the bag diameter and its attachment system.

Do not confuse the upper filter bag with the lower collection bag used to collect wood chips.

Ø 370 mm Cotton Filter Bag for Dust Collectors

This category also includes a 370 mm diameter cotton filter bag, offered for various dust collectors from Jean l'Ébéniste, Holzprofi and Leman.

This type of bag allows exhaust air to pass through while retaining some of the dust particles.

The correct bag must be selected according to the mounting diameter and the specifications of your machine.

An identical diameter alone does not guarantee full compatibility.

It is therefore essential to check the dimensions, attachment system and list of compatible machines provided on the product page.

A damaged or incorrectly secured filter bag should be replaced to limit dust leakage.

Ø 370 mm Collection Bags for the Holzmann ABS1080

The collection bag forms the lower section of the wood chip collection system.

It collects the waste transported by the airflow and makes disposal easier.

We offer 370 mm diameter plastic collection bags for dust collectors with a maximum capacity of 100 litres.

These bags are available in different pack sizes, allowing you to keep replacements available for regular maintenance.

A suitable collection bag must be securely attached to the machine.

When should the collection bag be replaced?

Replacement is necessary when the bag is full, torn, punctured or can no longer be secured properly.

A damaged bag may cause wood chips and dust to escape.

Before ordering, check the mounting diameter, capacity and bag dimensions.

Adjustable Retaining Band from 110 to 115 cm

Correctly securing the bags is essential for the proper operation of the dust collector.

This category includes an adjustable retaining band measuring 110 to 115 cm, intended for various dust collectors.

It allows a bag to be secured to a compatible mounting point.

Before ordering, measure the circumference of the attachment area on your dust collector and check the tightening mechanism.

A band that is too short or too long may not provide adequate retention.

When should the retaining band be replaced?

Replacement may be necessary if it is broken, deformed, heavily corroded or if its tightening mechanism no longer works correctly.

A defective retaining band may allow the bag to become detached or cause air leaks.

KJD22 Single-Phase Switch for Woodworking Machines

The switch controls the starting and stopping of the dust collector.

This category includes a KJD22 single-phase switch, offered for various woodworking and metalworking machines.

Before ordering this switch for your Holzmann ABS1080, it is essential to verify compatibility with the exact version of your machine.

In particular, check:

• The original switch reference.

• Supply voltage.

• Rated current.

• Number of terminals.

• Wiring diagram.

• Installation dimensions.

Two switches that look similar may have different electrical specifications.

Important: A single-phase switch must not be assumed to be compatible with a three-phase 400 V dust collector.

Any replacement must be carried out by a qualified person with the machine disconnected from the power supply.

M6 x 16 mm Left-Hand Thread Screw: Always Check Compatibility

This category also includes an M6 x 16 mm left-hand thread screw, listed for various Scheppach, Woodster, Kity and Parkside machines.

It must not be assumed to be compatible with the Holzmann ABS1080 simply because it appears in this category.

Before ordering, check the diameter, length, thread direction, head type and mounting position.

A left-hand thread screw cannot be replaced with a standard right-hand thread screw.

Using an unsuitable screw may damage the thread or compromise the attachment of the relevant component.

Why Has My Holzmann ABS1080 Lost Suction Power?

Reduced extraction performance may have several causes.

Before replacing a part, we recommend carrying out a few checks.

Full collection bag: An excessive accumulation of wood chips may interfere with the system's operation.

Clogged filter bag: Dust buildup may restrict airflow.

Blocked filter cartridge: A saturated filter may reduce airflow capacity.

Blocked extraction hose: Wood chips or pieces of timber may partially obstruct the hose.

Leaks at the connections: A poorly secured hose or inadequately tightened bag may reduce extraction efficiency.

Damaged impeller: Deformed or damaged blades may disrupt airflow.

Motor problem: An electrical or mechanical fault may prevent the impeller from operating normally.

A reduction in suction power does not necessarily mean that the motor is defective.

It is preferable to identify the exact cause of the malfunction before ordering a replacement part.

How to Maintain Your Holzmann ABS1080 Dust Collector

Regular maintenance helps preserve your dust collector's performance and reduce the risk of breakdowns.

Empty the wood chip collection bag regularly.

Check the condition of the filter bag or filter cartridge, depending on the equipment installed.

Make sure the extraction hose is not blocked, crushed or punctured.

Inspect the retaining bands and bag attachment systems.

Pay attention to any unusual noises coming from the motor or impeller.

If abnormal vibrations occur, stop the machine immediately and investigate their cause.

Before cleaning, inspecting or maintaining the dust collector, disconnect it from the power supply and wait until the impeller has come to a complete stop.

The Holzmann ABS1080 is a dust collector intended for woodworking machines. Its filtration equipment must be suitable for the dust produced and the protection requirements applicable to the intended use.

A fabric bag or a cartridge with unspecified filtration performance must not be considered sufficient protection against fine wood dust on its own.

Holzmann ABS1080 and Bernardo DC230: Which Parts Are Compatible?

The Holzmann ABS1080 and Bernardo DC230 share several components, which explains why certain replacement parts are listed for both models in our catalogue.

The 230 mm diameter steel impeller and the 750 W single-phase motor offered in this category are among the components listed for these two machines.

However, this compatibility must not be extended to every component.

Electrical versions, production series and mounting specifications may differ.

It is therefore essential to check each part reference before purchasing.

A component compatible with a single-phase ABS1080 will not necessarily be suitable for a three-phase ABS1080.

How to Identify the Correct Spare Part for the Holzmann ABS1080

Before ordering, start by checking the identification plate on your dust collector.

Record the exact model, supply voltage, serial number and, where necessary, manufacturing date.

Then consult the machine's exploded parts diagram to identify the component you need.

For an impeller, check the outside diameter, height, bore and keyed mounting.

For a motor, always verify the voltage, power rating and mounting dimensions.

For a filter bag or collection bag, compare the diameter and attachment system.

For a retaining band, measure the circumference of the mounting area.

For a switch, check the electrical specifications and connections.

Two visually similar parts may have different technical characteristics.

IMPORTANT: BEFORE PURCHASING, always check that your machine appears in the list of compatible machines provided on the spare part's product page. Where necessary, also verify the month and year of manufacture and your machine's serial number.

Repair Your Holzmann ABS1080 Instead of Replacing It

A malfunctioning dust collector does not necessarily need to be replaced entirely.

When a diagnosis accurately identifies the defective component, replacing the affected part may help extend the machine's service life.

A torn filter bag, broken retaining band, damaged impeller or faulty motor may require a targeted repair.

However, the repair must be appropriate for the overall condition of the dust collector and the nature of the fault.

Electrical work and complex mechanical repairs should be entrusted to a qualified person.

Find Holzmann ABS1080 Spare Parts at Probois Machinoutils

At Probois Machinoutils, we are expanding our range of spare parts for Holzmann dust collectors to help you maintain and repair your woodworking equipment.

In this category, you will find a selection of steel impellers, motors, filter cartridges, filter bags, collection bags, retaining bands and switches for the Holzmann ABS1080 dust collector.

If you cannot find the part you need, please provide the exact model of your dust collector, its supply voltage, serial number and, if possible, the position number shown on its exploded parts diagram.

A photograph of the original component may also help us identify the correct replacement.

Explore our selection of spare parts for the Holzmann ABS1080 dust collector and carefully check their compatibility before ordering to maintain your extraction system and restore your machine to working order.