Radial Miter Saw Blade Guard Parkside PKS1500B3
Parkside PKS1500B3 Radial Miter Saw Blade Guard
Parkside PKS1500B3 Radial Miter Saw Blade Guard
Parkside PZKS2000B2 and Scheppach HM216X Radial Miter Saw Blade Guard
Blade protector for radial miter saw Scheppach, Dexter and Parkside
Slide for radial miter saw Scheppach, Woodster, Dexter and Parkside
Press for radial miter saw Scheppach HM216SPX and Parkside PKS 200 0B2
Capacitor 0.33uf for miter saw Scheppach HM216SPX, Scheppach HM254SPX and Parkside PKS2000B2
Inner flange for miter saw Scheppach HM216SPX and Parkside PKS2000B2
Outer flange for miter saw Scheppach HM216SPX and Parkside PKS2000B2
Laser for miter saw Scheppach HM216SPX, Scheppach HM254SPX and Parkside PKS2000B2
Bag for radial miter saw Scheppach, Parkside, Dexter and Manupro
Motor for radial miter saw Scheppach HM80, Scheppach HM80LU, Scheppach HM80LXU, Scheppach MSS8, Scheppach MSS10, Scheppach HM100LXU, Woodster SX8LU, Woodster SL10LXU, Parkside PZKS 1500 A1, Dexter MS SL 8
Screw for radial miter saw Scheppach, Parkside, Kity and Dexter
This sprocket corresponding to the mark 76 for Scheppach HM216SPX, HM216X, Parkside PZKS2000B2
Radial Miter Saw Press Parkside PKS1500A2
Complete guide for radial miter saws from Scheppach, Woodster, Parkside and Dexter
Laser Radial saw Scheppach, Dexter, Woodster and Parkside
Table insert for radial miter saw Scheppach, Parkside, Woodster and Dexter
Blade clamping screw on radial saw Kity, Scheppach, Woodster, Dexter and Parkside - No available ? See : HPD10004360
Carbon brushes for Woodstar SL8LU and Scheppach TKS1500A1
Blade protector reference 3901208012 for radial miter saw Scheppach and Parkside 210 to 216 mm
Mobil stop for radial miter saw Parkside PZKS2000A1
Right stop for radial miter saw Parkside PZKS2000A1
Table insert reference 5901215010 for radial miter saw Scheppach, Parkside, Dexter and Manupro
Outer flange Ø45/Ø16x5 mm for Scheppach, Woodster, Parkside, Dexter and Manupro radial miter saws
Inner flange for Scheppach, Woodster, Dexter, Manupro and Parkside radial miter saws
Carbon brushes for Scheppach, Woodster, Dexter and Parkside blade 210 to 216 mm
Capacitor for various Kity and Scheppach radial miter saws and Parkside table saws
Pair of carbon brushes for various Kity, Scheppach, Holzmann and Parkside machines according to the following list: [LIST OF COMPATIBLE MACHINES]
Blade guard for radial miter saw Scheppach, Parkside, et Woodster
16 mm Carbon brushes's caps for Scheppach, Woodster, Dexter and Parkside blade 210 to 216 mm
Armature reference 5901215032 for radial miter saw Scheppach, Woodstar, Parkside and Manupro
Brush holder reference 3901204143 for radial miter saw Scheppach, Woodstar, Parkside and Dexter according to list below
Armature for radial miter saw Scheppach, Dexter, Parkside and Woodster
This reference guide 5901215005 is dedicated to various radial miter saws Scheppach, Woodstar, Dexter and Manupro
This locking lever with spring reference 5801207001 is dedicated to various radial miter saws Scheppach, Woodstar, Dexter and Manupro
Guide reference 3901227003 for radial miter saw Scheppach HM216SPX, HM254SPX and Parkside PZKS2000B2
Arming handle reference 5901220003 and marks 40-42-43 for Scheppach HM110MP and Dexter DX254 radial miter saw
Microswitch 3901204043 for Scheppach, Woodster, Dexter, Kity and Parkside radial mitre saws
Laser for Parkside radial mitre saw PZKS2000C3
Radial Miter Saw Locking lever ref 5901215009
Right stop 39012489003 for Parkside PZKS 2000 C3 mitre saw
Blade guard 39012489004 for Parkside PZKS 2000 C3 mitre saw
Left stop 39012489001 for Parkside PZKS 2000 C3 mitre saw
Stator for radial miter saw Scheppach, Dexter, Parkside and Woodster
Parkside PZKS2000B2 and Scheppach HM216X Radial Miter Saw Top handle cover - Piece n° 120
Parkside PZKS2000B2 and Scheppach HM216X Radial Miter Saw lower handle cover - Piece n° 127
Blade protector, part number 3901247005, for Parkside and Scheppach radial mitre saws, according to the following list : LIST OF COMPATIBLE MACHINES
Carbon brush part number 3901247013, for Parkside and Scheppach radial mitre saws, according to the following list : LIST OF COMPATIBLE MACHINES
Stator 3901105054 for miter or table saw Scheppach, Parkside, Dexter or Mac Allister following list below
Guide ref 3901247001 for Parkside and Scheppach radial mitre saws, according to the following list : LIST OF COMPATIBLE MACHINES
Blade guard Ref. 3901105035 for Scheppach, Woodster, Parkside and Dexter mitre saws
Are you looking for a spare part for your Parkside sliding mitre saw to repair your machine or replace a damaged component? At Probois Machinoutils, we offer a selection of replacement parts for various Parkside mitre saws, particularly models from the PKS and PZKS ranges.
Parkside sliding mitre saws are popular among DIY enthusiasts thanks to their versatility and affordability. These machines are designed to perform straight cuts, mitre cuts and bevel cuts in wood and other materials compatible with the machine specifications and the blade used.
With regular use, certain components may become worn, damaged or require replacement. A broken blade guard, a faulty switch, worn motor carbon brushes or a malfunctioning laser can affect the operation and safety of the machine.
Our range of Parkside mitre saw spare parts helps you find the components needed to restore your saw to working condition without necessarily having to replace the entire machine.
This category includes replacement parts for several generations of Parkside mitre saws, particularly selected models sold under the PKS and PZKS references.
Some of the machines covered by the spare parts available in our catalogue include:
These machines may differ considerably in their design, motor specifications, safety systems and mechanical components.
Important: a spare part suitable for a Parkside PZKS 2000 B2 is not necessarily compatible with a PZKS 2000 A1 or PZKS 2000 C3. Always check the exact machine model before ordering.
The blade guard for a Parkside mitre saw is an essential safety component. Its purpose is to restrict access to the saw blade when the blade is not engaged in the workpiece.
On many mitre saws, the movable blade guard automatically retracts as the cutting head is lowered and returns to its protective position when the head is raised.
A cracked, broken or jammed blade guard may prevent this mechanism from operating correctly and can create a serious safety hazard.
We offer various replacement blade guards for Parkside mitre saws, including components for certain versions of the PKS 1500 B3, PZKS 2000 B2 and PZKS 2000 C3.
Some blade guards are also compatible with selected Scheppach, Woodster or Dexter mitre saws.
Before ordering, compare the manufacturer's reference, mounting points and exact saw model.
Never operate a mitre saw with a missing, broken or defective blade guard.
Carbon brushes for Parkside mitre saws are wear components used in electric motors equipped with brushes.
They maintain electrical contact with the motor commutator, allowing the motor to operate correctly.
Over time, carbon brushes can wear down and cause various symptoms, including:
Our catalogue includes several references of motor carbon brushes for Parkside sliding mitre saws, some of which are also used on compatible Scheppach, Woodster and Dexter machines.
Carbon brush dimensions vary depending on the model. For example, certain references measure 14.5 x 10.8 x 6.8 mm, while others measure 9.9 x 5.9 x 12.5 mm.
It is therefore essential to check the dimensions and original part reference before replacing the brushes in your machine.
Replacing carbon brushes will not solve every motor problem. A damaged commutator, faulty armature or electrical failure may also be responsible for the malfunction.
The electric motor of a sliding mitre saw drives the blade and provides the power required for cutting operations.
A motor failure may prevent the machine from starting or cause a significant reduction in performance.
At Probois Machinoutils, we offer various motor components for selected Parkside mitre saws, including:
Some motors and electrical components are shared by machines marketed under the Parkside, Scheppach, Woodster or Dexter brands.
However, electrical specifications, dimensions, mounting points and part references may vary.
Before replacing a motor, armature or stator, it is essential to identify the cause of the failure and confirm that the replacement component is compatible with the machine.
Electrical repairs should only be carried out by someone with the necessary technical knowledge and qualifications.
Saw blade flanges play an essential role in securing and centring the circular saw blade.
The inner flange provides a supporting surface on the drive shaft, while the outer flange helps clamp the blade securely in position.
These two components work together with the blade fixing bolt to keep the blade properly secured during rotation.
A damaged, distorted or unsuitable flange may cause incorrect blade positioning, vibration or insufficient clamping.
We offer various inner and outer blade flanges for Parkside mitre saws, including components for selected machines equipped with 216 mm or 254 mm blades.
The flange dimensions, bore and shape must match the specifications of the machine exactly.
Always follow the manufacturer's instructions regarding blade installation and tightening direction.
The blade fixing bolt secures the blade and its flanges to the drive shaft.
A damaged bolt or one with a worn thread must be replaced with a suitable component.
Our catalogue includes various blade fixing bolts used on selected Parkside, Scheppach, Kity, Woodster and Dexter mitre saws.
Before ordering, check the diameter, length and thread direction of the original bolt.
Important: some mitre saws use specific thread directions or fastening systems. Never replace a blade fixing bolt with a standard bolt unless its compatibility has been confirmed.
The laser guide for a Parkside mitre saw is a positioning aid designed to display a reference line when preparing a cut.
It helps users align the workpiece with the cutting mark and can make the saw more convenient to operate.
Over time, the laser module may become defective or stop working.
We offer several replacement laser modules for Parkside sliding mitre saws, including parts for certain PZKS 2000 B2 and PZKS 2000 C3 versions.
These devices are not universal. Their power supply, dimensions and mounting points may differ depending on the model.
The laser is a positioning aid and does not replace the mechanical adjustment of the machine or the necessary checks before cutting.
Mitre saw fences and stops help position wooden workpieces correctly and provide stable support during cutting.
A bent, broken or incorrectly secured fence can cause positioning errors and reduce cutting accuracy.
Our selection includes:
The table insert is positioned around the blade opening and helps support the workpiece close to the cutting area.
A severely damaged insert should be replaced with a component matching the dimensions and mounting points of the machine.
Switches and electrical controls for Parkside mitre saws are essential for operating and controlling the machine.
A faulty switch may prevent the saw from starting or cause irregular operation.
We offer various electrical components for selected Parkside mitre saws, including microswitches, switches and capacitors.
Replacing an electrical component requires checking its reference, technical specifications and wiring connections.
Never remove or bypass a safety device to restore machine operation.
In addition to the main motor and safety components, our catalogue includes various mechanical parts and accessories for sliding mitre saws.
Depending on the model, you may find:
These components can help repair various mechanisms and keep the machine operational when a safe and technically suitable repair is possible.
To identify the correct replacement part for a Parkside mitre saw, it is important to check the information displayed on the machine's identification plate.
We recommend checking the following details:
Parkside models may change between production versions. Two saws with similar model names do not necessarily use identical components.
To avoid ordering the wrong part, always consult the compatibility information provided on each product page.
Some Parkside mitre saws share components with machines sold under the Scheppach, Woodster, Kity or Dexter brands.
This may be explained by similarities in design or manufacturing arrangements between certain machine ranges.
As a result, the same spare part reference may sometimes be used on several machines sold under different brands.
However, compatibility must always be checked individually. A similar external appearance does not guarantee that motors, blade guards, switches or fastening systems are interchangeable.
At Probois Machinoutils, we provide model compatibility information on our product pages to help customers identify suitable replacement components.
Regular maintenance helps reduce premature wear on certain components and keeps your machine in good working condition.
After each use, it is recommended to remove sawdust accumulated around the table, fences and accessible mechanisms.
The following components should also be checked regularly:
Before performing any maintenance or repair, always unplug the machine and wait until the blade has completely stopped.
If an electrical fault or safety device failure occurs, the diagnosis and repair should be entrusted to a suitably qualified person.
A mitre saw that no longer operates correctly does not necessarily need to be replaced.
Replacing a blade guard, switch, pair of carbon brushes or mechanical component may help extend the machine's service life.
Repairing the machine can be a cost-effective solution when the defective component is available and the repair can be carried out safely.
It also helps avoid premature equipment replacement and can reduce waste associated with electrical tools.
Probois Machinoutils specialises in woodworking machinery, accessories and replacement parts for a wide range of brands.
We offer a selection of spare parts for Parkside sliding mitre saws to help you repair and maintain your equipment.
Explore this category to find blade guards, motor carbon brushes, blade flanges, laser guides, fences, table inserts, motors, armatures, stators, switches and various mechanical components.
Whether you are looking for a spare part for Parkside PZKS 2000 B2, a replacement component for Parkside PZKS 2000 C3 or a part for another Parkside mitre saw, browse our available references and check their compatibility with your machine.
With the correct replacement parts, you can carry out the necessary repairs and extend the service life of your Parkside sliding mitre saw.