Poly V belt 736J4 (290J) for the scoring saw on Holzmann KF315VF-2000 spindle moulder saw and TS315VF-2600 or TS315VF-3200 format saw, Leman COM310
Outer flange reference C43 for Holzmann circular saw TS315VF2600, TS315VF3200 and reference D43 for Holzmann KF315VF2000 or KF315VF2600 spindle moulder-saw
MS10x25 screw, C45 mark for Holzmann TS315VF2600, TS315VF3200 circular saw and D45 mark for Holzmann KF315VF2000 or KF315VF2600 Sliding table saw
400V motor for Holzmann format saw
Roller ref 10000091 for Holzmann TS315VF-2600
Original Holzmann mitre gauge knob for TS315VF2000, TS315VF2600 and TS315VF3200 sliding table saws.
Are you looking for spare parts for your Holzmann TS315VF-2600 sliding table saw? At Probois Machinoutils, you will find a selection of components designed for maintaining, repairing and replacing worn parts on your machine.
The Holzmann TS315VF-2600 is a sliding table saw equipped with a 2600 mm sliding table. It is designed for rip and cross-cutting operations on timber and wood-based panels.
Its sliding table makes it easier to move and guide workpieces during cutting, while the scoring unit helps improve the finish when cutting coated panels.
Over time, certain mechanical or electrical components may wear out, become damaged or require replacement.
Our category includes a 736J4 Poly-V belt for the scoring unit, a 400V replacement motor, a saw blade flange, an M10 × 25 fixing screw, a sliding table roller and a mitre fence locking knob.
Discover the functions of these spare parts, the symptoms that may indicate wear and the checks you should carry out before ordering.
Our selection includes six references intended for different mechanisms of your sliding table saw.
For the scoring unit, we offer a 736J4 Poly-V belt, also designated 290J.
For the motor, you will find a 400V replacement motor intended for Holzmann TS315VF-2600 and TS315VF-3200 sliding table saws.
For the blade mounting system, we offer a flange, exploded-view position C43, and an M10 × 25 fixing screw, position C45.
For the sliding table, a replacement roller with Holzmann reference 10000091 is available.
For the mitre fence, we also offer an original Holzmann locking knob compatible with several TS315VF versions.
Some of these components are shared with other Holzmann machines or models from other brands. However, it is essential to check the compatibility information on each individual product page.
The 736J4 Poly-V belt, also designated 290J, is intended for the scoring unit drive system of the Holzmann TS315VF-2600 sliding table saw.
The scoring unit is used to make a preliminary cut before the main saw blade passes through the material.
When correctly adjusted, it helps reduce chipping on the underside of coated panels, particularly melamine-faced and laminated boards.
For the scoring unit to operate correctly, its drive system must remain in good condition.
The Poly-V belt transmits movement between the relevant components of the mechanism.
Over time, it can wear due to mechanical stress, incorrect tension or misalignment.
A damaged belt may cause unusual noises, vibrations or irregular operation of the scoring unit.
When should the 736J4 belt be replaced?
Replacement may be necessary if the belt shows cracks, damaged ribs, deformation or significant wear.
Before ordering, always check the markings on your original belt.
The 736J4 (290J) reference is offered for the scoring unit of the Holzmann TS315VF-2600 and TS315VF-3200, as well as for certain other compatible machines, including the Holzmann KF315VF-2000 combination saw and spindle moulder and the Leman COM310.
Important: do not confuse this 736J4 belt with the 914J7 belt offered for the TS315VF-2000 version.
These are two different references and must not be considered interchangeable.
The 400V replacement motor for Holzmann TS315VF-2600 is intended for the corresponding three-phase version of this sliding table saw.
It is also offered for the Holzmann TS315VF-3200.
The motor is one of the main components of the machine. It provides the mechanical power required to operate the cutting system.
A defective motor may cause various symptoms, including starting difficulties, loss of power, unusual noises, irregular operation or excessive overheating.
However, these symptoms do not necessarily mean that the motor needs to be replaced.
An electrical system fault, a drive system problem or abnormal mechanical resistance can also interfere with the machine's operation.
It is therefore important to carry out an accurate diagnosis before ordering a new motor.
In particular, check the technical specifications shown on the rating plate of the original motor.
This motor is intended for compatible 400V versions. It must not be considered a replacement motor for a 230V single-phase machine.
Work on electrical components should be carried out by a qualified person.
The saw blade flange, position C43, is intended for the blade mounting system of the Holzmann TS315VF-2600 and TS315VF-3200 sliding table saws.
It is also offered for certain Holzmann KF315VF combination saw and spindle moulder models, where it corresponds to position D43.
The flange helps position and secure the blade on its shaft.
Its condition is important to ensure that the blade is installed in accordance with the manufacturer's specifications.
A damaged or deformed flange, or one showing abnormal wear, can affect the correct positioning of the blade.
When replacing a circular saw blade, it is advisable to inspect the contact surfaces and mounting components.
If the flange shows visible damage, replacement may be necessary.
Before carrying out any work, disconnect the machine from the power supply and wait until the blade has stopped completely.
Important: on the Holzmann TS315VF-2600, this flange corresponds to position C43. Check this position on your machine's exploded diagram before ordering.
The M10 × 25 screw, position C45, is offered for the Holzmann TS315VF-2600 and TS315VF-3200 sliding table saws.
It is also intended for certain Holzmann KF315VF combination saw and spindle moulder models, where it corresponds to position D45.
This screw is used in the relevant mounting system.
A fixing component with damaged threads, deformation or significant signs of wear may need to be replaced.
It is essential to use a screw with the correct specifications for the mechanism concerned.
A screw with an approximately similar length or thread does not guarantee compatibility.
Before ordering, check the dimensions of the original component and its position on the exploded diagram.
When reassembling, follow the manufacturer's instructions concerning the positioning and tightening of the components.
For the Holzmann TS315VF-2600, check position C45 and the M10 × 25 dimensions before ordering.
The Holzmann sliding table roller, ref. 10000091, is a replacement component intended for the TS315VF-2600 sliding table saw.
The sliding table is one of the key components of a sliding table saw.
It allows workpieces to be moved during cutting operations while helping to guide them through the cut.
For smooth movement, the various components of the guiding system must remain in good condition.
A worn or damaged roller can interfere with the movement of the sliding table.
What symptoms may indicate a defective roller?
A sliding table that moves in jerks, produces unusual noises or has abnormal resistance may require inspection of its guiding system.
However, these symptoms are not necessarily caused by a defective roller.
An accumulation of dust, incorrect adjustment or another damaged component may also be responsible.
You should therefore inspect the entire mechanism before ordering.
The component offered in this category has Holzmann reference 10000091 and is intended for the TS315VF-2600.
The mitre fence locking knob is an original Holzmann spare part intended for the mitre fence adjustment system.
It allows the selected setting of the corresponding fence to be secured.
This knob is offered for Holzmann TS315VF sliding table saws equipped with 2000, 2600 and 3200 mm sliding tables.
A broken or damaged locking knob, or one with damaged threads, may prevent the fence from locking correctly.
In this case, replacement may be necessary.
However, if the mitre fence no longer locks correctly, also inspect the other components of the mechanism.
A locking problem may be caused by another component or incorrect positioning.
Before ordering, check compatibility with your particular TS315VF version.
A sliding table saw that will not start does not necessarily have a defective motor.
Several different causes may explain the problem.
A fault in the power supply, a defective control component or a tripped protection device may prevent the machine from starting.
A mechanical blockage or abnormal resistance within the drive system can also interfere with operation.
Before replacing the motor, it is therefore essential to determine the exact cause of the fault.
If the motor produces unusual noises, overheats excessively or suffers a significant loss of power, stop using the machine immediately.
Electrical checks must be carried out by a qualified person in accordance with the applicable safety instructions.
A scoring unit malfunction may result in poor cutting quality, unusual noises or vibrations.
The 736J4 Poly-V belt may be responsible if it is worn or damaged.
However, it is important not to replace the belt automatically without carrying out the necessary checks.
Incorrect scoring unit adjustment can also cause finishing defects on panels.
Likewise, a blunt scoring blade or one unsuitable for the material can affect cutting quality.
If the problem concerns the mechanical operation of the scoring unit, inspect the condition of its drive system.
Before carrying out any inspection, disconnect the machine from the power supply and wait until the blades have stopped completely.
The 2600 mm sliding table is an important part of your sliding table saw.
It should move smoothly to make it easier to guide workpieces during cutting operations.
If the sliding table has tight spots, moves in jerks or produces unusual noises, several causes are possible.
Start by checking the cleanliness of the accessible guide areas.
An accumulation of sawdust or dust can interfere with the movement of certain mechanisms.
Next, inspect the condition of the rolling components.
A worn or damaged roller may contribute to irregular sliding table movement.
The 10000091 reference offered in this category can be used to replace the corresponding roller on the Holzmann TS315VF-2600.
Before ordering, however, make sure that this component is actually the cause of the problem.
Unusual vibrations can have several causes.
A damaged, blunt or incorrectly fitted blade can affect the operation of the machine.
A mounting problem may also require inspection of the flange and associated components.
If the vibrations are related to the scoring unit, it may be useful to inspect its drive belt.
A damaged belt or alignment problem can interfere with the operation of the mechanism.
It is important to distinguish vibrations originating from the cutting system from those related to the movement of the sliding table.
If significant vibrations occur, stop the machine immediately and identify their cause before using it again.
Regular maintenance helps preserve the accuracy and correct operation of your sliding table saw.
Before carrying out any work, disconnect the machine from the power supply and wait until the blades have stopped completely.
Regularly clean accessible areas to prevent excessive accumulation of sawdust and dust.
Check the condition of the main blade and scoring blade.
Also check that the safety devices, fences and locking systems operate correctly.
Pay particular attention to the sliding table and its guiding components.
Irregular movement should be investigated before continuing to use the machine.
Finally, periodically inspect the condition of the belts and watch for unusual noises or vibrations.
A damaged component must be replaced with a part that matches the specifications of the original component.
Before ordering, it is essential to identify your machine accurately.
We recommend recording the following information:
Brand: Holzmann.
Exact model: TS315VF.
Version: 2600 mm sliding table.
Supply voltage.
Serial number.
Manufacturing month and year.
Original spare part reference.
Position number on the exploded diagram, where indicated.
For the scoring unit belt, check the 736J4 (290J) reference.
For the saw blade flange, check position C43.
For the fixing screw, check the M10 × 25 dimensions and position C45.
For the sliding table roller, check reference 10000091.
Some components are also offered for the TS315VF-3200 or for Holzmann KF315VF combination saw and spindle moulder models. This does not mean that all components are shared between these machines.
IMPORTANT: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also check your machine's manufacturing month, manufacturing year and serial number.
A component that looks visually similar is not necessarily compatible with your machine.
A localised fault does not necessarily require replacing the entire sliding table saw.
When the problem is caused by a worn belt, a damaged mounting component or a defective sliding table roller, replacing the affected component may allow the machine to be repaired.
Repairing your machine can therefore help extend its service life.
However, it is essential to carry out an accurate diagnosis before ordering.
Replacing a component that is not responsible for the malfunction will not solve the problem.
For electrical components and parts involved in machine safety, follow the manufacturer's instructions and consult a qualified professional whenever necessary.
At Probois Machinoutils, discover our selection of spare parts for maintaining and repairing your Holzmann TS315VF sliding table saw equipped with a 2600 mm sliding table.
We offer the 736J4 Poly-V scoring unit belt, a 400V replacement motor, a saw blade flange position C43, an M10 × 25 screw position C45, a sliding table roller ref. 10000091 and a mitre fence locking knob.
Before ordering, make sure you select the component that corresponds exactly to your machine.
Are you looking for another spare part for your Holzmann TS315VF-2600?
Send us the exact model of your saw, its supply voltage, serial number, manufacturing date and, if possible, the position number of the required component on the exploded diagram.
This information will make it easier to identify the correct spare part.
Probois Machinoutils: your specialist in Holzmann machine spare parts, helping you maintain, repair and extend the service life of your TS315VF-2600 sliding table saw.
