Parts for Dexter TS10 circular saw

Parts for Dexter TS10 circular saw - Probois Machinoutils

Active filters

Spare Part for Dexter TS10 and TS100S Table Saw: Repair and Maintain Your Machine

Are you looking for a spare part for your Dexter TS10 or TS100S table saw to repair your machine, replace a worn component or extend its service life? At Probois Machinoutils, we offer a selection of replacement parts for maintaining and repairing Dexter table saws, a brand distributed through retailers including Leroy Merlin.

The Dexter TS10 and TS100S table saws are designed for various woodworking operations, including cutting boards, timber and wood-based panels for DIY and joinery projects.

Like any woodworking machine, a table saw contains mechanical and electrical components, as well as safety devices, which may wear out or become damaged over time.

Replacing a faulty motor, worn carbon brushes, damaged fence or broken blade guard may help restore the machine to working condition without having to purchase a completely new saw.

Our catalogue includes several replacement parts for Dexter TS10 and TS100S table saws, some of which are also used on Scheppach HS100S, Woodster ST10S and other compatible machines.

However, compatibility must always be checked for each individual part, as certain components differ depending on the exact model and manufacturing date.

Which Spare Parts Are Available for Dexter TS10 and TS100S Table Saws?

A Dexter table saw consists of several mechanical and electrical assemblies responsible for driving the blade, guiding the workpiece, adjusting the cutting settings and protecting the operator.

When one of these components becomes excessively worn or defective, replacing the affected part may be sufficient to restore the machine's functionality.

In this category, you can find various components, including:

  • Electric motors for certain versions of the Dexter TS100S table saw.
  • Motor carbon brushes for compatible brushed electric motors.
  • Complete rip fences for guiding timber during cutting.
  • Mitre gauges for making cuts at selected angles.
  • Inner blade flanges for correctly positioning the saw blade.
  • Blade guards designed to reduce the risk of contact with the rotating blade.
  • Internal protective covers for certain machine configurations.
  • Laser guide units for models equipped with this system.
  • Aluminium profiles used in certain guiding systems.
  • Left-hand threaded screws for specific mechanical assemblies.

Some parts may be shared between several brands, but they are not necessarily interchangeable across all Dexter table saw models.

Motor for Dexter TS100S Table Saw: Replace a Faulty Electric Motor

The electric motor for Dexter TS100S table saw is one of the machine's main components. It drives the saw blade and provides the power required for cutting operations.

After several years of use, a motor may develop various problems, including difficulty starting, reduced power, abnormal overheating or unexpected shutdowns during operation.

These symptoms do not necessarily mean that the entire motor needs replacing. They may also be caused by an unsuitable electrical supply, worn carbon brushes, a defective switch or a mechanical problem.

Our catalogue includes replacement motors for Scheppach HS100S, Woodster ST10S and Dexter TS100S table saws.

Two different versions must be distinguished according to the manufacturing period:

  • Motor for machines manufactured up to and including October 2019.
  • Motor for machines manufactured from November 2019 onwards.

This distinction is essential because the motors may differ in design, mounting arrangements or electrical connections.

Another motor in our catalogue, rated at 230 V and bearing reference 3901304010, is offered for certain Scheppach HS100L, Dexter, Woodstar, Mac Allister and Toolson saws. However, its compatibility with a Dexter TS10 or TS100S must be confirmed using the relevant product information.

Before ordering, always check the original motor reference, electrical specifications, exact saw model and manufacturing date.

Carbon Brushes for Dexter TS100S Table Saw: Restore Reliable Motor Operation

Carbon brushes for Dexter TS100S table saws are wear components used in certain brushed electric motors.

They provide the electrical contact required for motor operation and gradually wear down during use.

When the carbon brushes become too short or wear unevenly, the motor may begin to malfunction.

Several symptoms may indicate that they need inspecting:

  • The motor becomes difficult to start or operates intermittently.
  • The saw stops unexpectedly during use.
  • The motor appears to lose power.
  • Abnormal sparking occurs around the motor.
  • The carbon brushes are excessively worn or damaged.

We offer carbon brushes measuring 19.7 x 13.3 x 7.4 mm for certain Scheppach HS100S, Woodster ST10S and Dexter TS100S table saws.

Before purchasing replacement brushes, check the exact dimensions of the original components, their shape and their connection system.

A motor with a damaged commutator or another internal fault may not be repairable simply by fitting new carbon brushes.

Rip Fence for Dexter Table Saw: Make Straight and Consistent Cuts

The rip fence for Dexter table saw is an essential accessory for making longitudinal cuts in wood.

Positioned on the saw table, it helps maintain a consistent distance between the workpiece and the saw blade.

A correctly adjusted rip fence contributes to accurate, repeatable cuts, particularly when cutting boards or wooden panels to width.

Over time, certain fence components may become damaged, including the clamping mechanism, aluminium profile, support or locking system.

Our catalogue includes a complete rip fence for Scheppach HS100S, Woodster ST10S and Dexter TS100S table saws.

Before ordering, check that the fence dimensions, mounting system and profile correspond to your machine.

A fence that has excessive play or cannot be securely locked should be repaired or replaced before cutting operations resume.

Mitre Gauge for Dexter TS10 and TS100S Table Saw: Make Accurate Angled Cuts

The mitre gauge for Dexter table saw is designed to guide wooden workpieces during certain crosscutting and angled cutting operations.

It generally slides along a dedicated groove in the saw table and allows the workpiece to be positioned at the required angle.

This accessory can be useful for making frames, small wooden structures and various woodworking joints.

Our selection includes a mitre gauge for Scheppach HS100S, Woodster ST10S and certain compatible Dexter table saws.

Before purchasing, check the width of the table slot, the shape of the sliding bar and the characteristics of the angle adjustment system.

An unsuitable mitre gauge or one with excessive play can compromise cutting accuracy.

Inner Blade Flange for Dexter Table Saw: Secure the Saw Blade Correctly

The inner blade flange for Dexter TS100S table saw helps position and secure the saw blade on the machine's spindle.

It works together with the other components of the blade mounting system to ensure that the blade is installed according to the manufacturer's specifications.

A flange may become damaged following an impact, incorrect tightening or the use of an unsuitable saw blade.

A deformed or damaged contact surface may prevent the blade from seating correctly and could cause abnormal vibration.

We offer an inner blade flange for Scheppach HS100S, Woodster ST10S and Dexter TS100S table saws.

Before ordering, check the bore diameter, flange dimensions and correspondence with the original component.

Never modify a blade flange in an attempt to make it fit another machine.

Blade Guard for Dexter TS100S Table Saw: Maintain Essential Safety Equipment

The blade guard for Dexter TS100S table saw is an essential safety component during cutting operations.

It helps limit access to the exposed section of the saw blade and reduces the risk of accidental contact with the rotating disc.

A guard may become cracked, broken or deformed following an impact or incorrect handling.

Our catalogue includes:

  • A blade guard for Scheppach HS100S, Woodster ST10S and Dexter TS100S table saws.
  • An internal blade protective cover for certain versions of these machines.

These components serve different purposes and must not be confused with one another.

Before ordering, check the guard's shape, mounting points and compatibility with your particular machine version.

Never operate a table saw with a missing, broken or deliberately disabled blade guard.

Laser Guide for Dexter Table Saw: Replace a Faulty Cutting Guide

Some table saws are equipped with a laser guide designed to help the operator identify the intended cutting line.

This device projects a visible reference line that can assist with positioning the workpiece before or during certain cutting operations.

A laser unit may stop working because of a power supply problem, faulty connection or failure of the module itself.

Our catalogue includes a laser guide unit for certain Scheppach, Woodster and Dexter table saws.

Before ordering this component, check that your machine is equipped with the corresponding system and that the laser's specifications are suitable.

The projected line never replaces correct fence adjustment or the safety precautions required when operating a table saw.

Aluminium Profile for Table Saw: Check the Manufacturing Date

Aluminium profiles for table saws may be used in various guiding or adjustment systems depending on the machine's construction.

When a profile becomes bent, cracked or excessively worn, replacing it may be necessary to restore proper operation.

Our selection includes two references offered for certain Scheppach table saws:

  • Aluminium profile reference 5901304030, associated with machines manufactured up to November 2019 according to the product information.
  • Aluminium profile reference 5901310008, associated with machines manufactured from November 2019 according to the product information.

The transition period must be checked carefully, particularly for machines manufactured during November 2019.

These references must not automatically be considered compatible with every Dexter TS10 or TS100S table saw. Always consult the exact list of compatible models and compare the component dimensions.

Left-Hand Threaded Screw for Dexter Table Saw: Identify the Correct Thread Direction

Some woodworking machines use left-hand threaded screws for specific mechanical assemblies.

Unlike a conventional right-hand threaded screw, a left-hand threaded screw tightens and loosens in the opposite direction.

This type of fastener may be used on components subjected to rotational movement, depending on the manufacturer's design.

Our catalogue includes a left-hand threaded screw for certain Scheppach, Woodster, Parkside and Dexter machines.

Before replacing this component, check its diameter, length, head type and thread direction.

Never force a screw without first identifying the correct loosening direction, as this could damage the thread or surrounding components.

How to Identify a Fault on a Dexter TS10 or TS100S Table Saw

A Dexter table saw may develop various operating problems after several years of regular use.

Some symptoms can help identify which components should be inspected:

  • The motor no longer starts: check the electrical supply, switch, carbon brushes and motor.
  • The saw loses power: inspect the blade, carbon brushes and general motor condition.
  • The rip fence no longer locks: examine the clamping mechanism and complete fence assembly.
  • Cutting accuracy decreases: check the blade, its mounting and the guiding systems.
  • The blade guard is broken: replace the safety component before using the machine again.
  • The blade vibrates abnormally: inspect its condition, the blade flanges and the mounting system.
  • The laser no longer works: check its power supply and the connections specified by the manufacturer.
  • A mechanical component becomes jammed: look for accumulated sawdust, deformation or damaged parts.

These symptoms provide useful troubleshooting indications but do not always identify the exact cause of the problem.

It is advisable to establish a reliable diagnosis before purchasing replacement components.

How to Choose a Compatible Spare Part for Your Dexter TS10 or TS100S Table Saw

Choosing a replacement part for a Dexter TS10 or TS100S table saw requires accurate identification of the machine.

Some components may be shared between Scheppach HS100S, Woodster ST10S and Dexter TS100S table saws. However, similarities between models do not guarantee that every part is interchangeable.

Before ordering, we recommend checking the following information:

  • The exact brand and model of your table saw.
  • The month and year of manufacture.
  • The serial number shown on the machine's identification plate.
  • The original reference number of the required part.
  • The component's position number in the exploded parts diagram.
  • The dimensions and technical specifications of the replacement part.
  • The list of compatible machines provided on the individual product page.

This verification is particularly important for Dexter TS100S replacement motors, as different versions are used depending on whether the machine was manufactured up to October 2019 or from November 2019 onwards.

It is also essential to distinguish between the Dexter TS10, TS100S, TS8, TS8XL and DX254TS models, which do not necessarily use the same components.

IMPORTANT: BEFORE PURCHASING A SPARE PART, ALWAYS CHECK YOUR MACHINE'S EXACT MODEL, MANUFACTURING DATE AND SERIAL NUMBER. CONSULT THE COMPATIBILITY INFORMATION PROVIDED ON EACH PRODUCT PAGE.

Maintain Your Dexter Table Saw to Extend Its Service Life

Regular maintenance helps preserve the performance of your Dexter TS10 or TS100S table saw and reduces the risk of premature component wear.

After each use, clean the worktable and remove sawdust and wood chips from accessible areas of the machine.

The saw blade should be inspected regularly to check the condition of its teeth, identify possible deformation and ensure that it is suitable for the material being cut.

Blade flanges must remain clean and in good condition to ensure that the blade is correctly mounted.

Rip fences and mitre gauges should move and lock correctly without excessive play.

Blade guards and other safety devices must remain correctly installed and fully operational.

It is also important to monitor unusual noises, excessive vibration and signs of motor overheating.

A brushed electric motor may require periodic inspection of its carbon brushes in accordance with the manufacturer's recommendations.

Before carrying out any maintenance, inspection or replacement operation, completely disconnect the machine from its electrical supply and wait until the blade has stopped rotating.

Why Buy Dexter TS10 and TS100S Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we offer a selection of spare parts for Dexter TS10 and TS100S table saws to help you maintain and repair your woodworking equipment.

Our catalogue includes electric motors, carbon brushes, rip fences, mitre gauges, blade flanges, blade guards, laser guides and aluminium profiles.

We also supply replacement components for various Scheppach, Woodster, Parkside and other branded machines, according to the part references and compatibility information provided.

The availability of individual components may vary depending on supplier stock levels and replenishment schedules.

Replacing a worn or defective component can help extend the working life of your table saw and avoid the premature replacement of the entire machine.

Whether you are looking for a motor for Dexter TS100S table saw, carbon brushes, a rip fence, a blade guard or an inner blade flange, carefully review our product descriptions to identify the correct reference for your equipment.

Discover our range of replacement parts for Dexter TS10 and TS100S table saws and maintain your machine regularly to preserve its reliability, cutting accuracy and service life.