704 mm Chain for Holzmann and Bernardo Jointed Planer and Combination Wood as listed below
Trapezoidal belt for jointer, planer and woodworking combination according to the list below
Motor 230V for the planer thicknesser Bernardo ADH250 and Holzmann HOB260ECO
Suction housing outlet for the planer thicknesser Bernardo ADH250 and Holzmann HOB260ECO
Up and down handwheel of the Holzmann HOB260ECO(SMW2) planer
Handle reference 3 of view LT02 for Holzmann HOB260ECO and HOB260ECOSMW2 planer and thicknesser
Special wire capacitor for machine start-up, power 100µf, 275VAC
Exit roller for planer jointer Holzmann HOB260ECO and Bernardo ADH250P
Cover plate reference 35 for Bernardo ADH250 and Holzmann HOB260ECO thicknesser planer
Single-phase switch with emergency stop point DKLD 15A-250V or CK21
608 mm chain for Holzmann and Bernardo planer and jointer as listed below
M8x10 MM blade locking screw with hexagon head and 12 mm wrench for Holzmann and Bernardo thicknesser, planer and woodworking combination
Discover our selection of spare parts for the Holzmann HOB260ECO SMW2 planer thicknesser, grouped together to make maintenance, troubleshooting and repairs on your woodworking machine easier.
The Holzmann HOB260ECO SMW2 combines two essential woodworking operations: surface planing, which produces a flat face and a reference edge, and thicknessing, which brings wooden workpieces to the required thickness.
Over time, certain mechanical and electrical components may wear out, deteriorate or develop faults. A damaged belt, broken chain, faulty capacitor or worn roller can interfere with the machine's operation.
At Probois Machinoutils, we offer replacement parts to help you repair the main components of your Holzmann HOB260ECOSMW2 and extend its service life.
This category includes drive chains, a V-belt, a replacement motor, capacitors, a switch, an outfeed roller, an adjustment handwheel, a handle and various mechanical components.
Each part must be selected according to the exact version of your machine and the compatibility information provided on its product page.
The electric motor provides the power required to operate the planer thicknesser.
Our selection includes a 230 V replacement motor for the Holzmann HOB260ECO and Bernardo ADH250.
This component may be required when a fault in the original motor has been confirmed and repairing its associated components is not sufficient.
However, a motor that refuses to start is not necessarily defective.
Before considering replacement, several elements should be checked:
The machine's electrical power supply.
The operation of the switch.
The condition of the capacitors.
The absence of mechanical obstructions.
The condition of the transmission components.
A motor that produces a humming noise, struggles to start or stops abnormally requires a diagnosis before the machine is used again.
Motor replacement must be carried out by a qualified person, respecting the electrical and mechanical specifications of the original model.
Always check that the motor is compatible with your HOB260ECO SMW2 version before ordering.
The V-belt transmits movement between the pulleys in the drive system.
It plays an important role in ensuring the machine operates smoothly.
Our category includes a V-belt for planer thicknessers and combination woodworking machines, offered for the models specified in its compatibility list.
A belt may need replacing if it shows:
Cracks or splits.
Significant wear on its sides.
Signs of fraying.
Slipping during operation.
Breakage.
Abnormal deformation.
A worn belt can interfere with power transmission and cause irregular operation.
Before fitting a new belt, also check the condition of the pulleys and make sure there is no mechanical obstruction.
A damaged or misaligned pulley may cause the new belt to wear prematurely.
The belt profile and dimensions must match those specified for your machine exactly.
Drive chains transfer movement between mechanical components equipped with sprockets.
Our selection includes a 704 mm drive chain, offered for several Holzmann and Bernardo planer thicknessers and combination woodworking machines.
This chain may need replacing if it shows signs of wear or significant deterioration.
The main symptoms to look out for are:
Broken or deformed links.
Excessive chain elongation.
Stiff sections.
Unusual noises during operation.
Irregular transmission of movement.
Before ordering, check the length of the original chain and its position on the machine.
A drive chain must have the correct dimensions for the mechanism in which it is installed.
It is also advisable to inspect the associated sprockets for possible wear or obstruction.
Our category also includes a 608 mm drive chain.
This reference is different from the 704 mm chain.
The two models must not be considered interchangeable.
Before ordering, it is essential to identify precisely which chain needs replacing using the exploded parts diagram and the information provided on the product page.
An unsuitable chain may prevent the mechanism from operating correctly or cause abnormal mechanical stress.
When a chain breaks, it is important to investigate the cause.
A seized mechanism, damaged sprocket or operating fault may be responsible.
Replacing the chain alone is therefore not always sufficient to resolve the problem permanently.
The outfeed roller helps move the wood after it has passed the cutterblock during thicknessing.
It contributes to guiding the workpiece towards the machine's exit.
Our selection includes an outfeed roller for the Holzmann HOB260ECO and Bernardo ADH250P.
A worn, deformed or damaged roller may interfere with the smooth feeding of wood.
Several symptoms may indicate that it needs inspecting:
Irregular workpiece feeding.
Visible damage to the roller.
Feeding difficulties.
Unusual mechanical noises.
Abnormal roller rotation.
However, a feeding problem does not necessarily originate from the roller itself.
The chains, transmission components and machine settings should also be checked.
Before ordering, verify your machine's version and the specifications of the original roller.
A feed mechanism failure can have several causes.
If the wood no longer feeds correctly during thicknessing, it is important to identify the cause of the malfunction before replacing a part.
Start by inspecting accessible components with the machine unplugged and in accordance with the manufacturer's instructions.
The main components to check are:
The infeed and outfeed rollers.
The drive chains.
The belt.
The sprockets.
The feed mechanisms.
The settings specified by the manufacturer.
A roller that no longer rotates may be perfectly functional if the problem is caused by a broken chain.
Conversely, a transmission system in good condition does not guarantee proper feeding if a roller's surface is severely damaged.
A systematic diagnosis helps avoid unnecessarily replacing several components.
Our selection includes a 100 µF 275 VAC wired starting capacitor, offered for the machines listed on its product page.
Depending on the motor's electrical configuration, a starting capacitor plays a role when the motor starts.
A faulty capacitor may cause starting difficulties.
Possible symptoms include:
A motor that struggles to start.
A humming noise without normal starting.
Irregular starting.
Visible damage to the capacitor.
However, these symptoms alone are not sufficient to confirm that the capacitor is responsible for the fault.
A power supply fault, switch problem or mechanical obstruction may cause similar behaviour.
Before ordering, check that the 100 µF capacitance, 275 VAC rated voltage and capacitor type match the specifications of the original component exactly.
Work on capacitors must be entrusted to a qualified person.
We also offer a 25 µF wired capacitor, intended for the machines listed in its compatibility information.
This component is different from the 100 µF capacitor.
These two references must never be considered interchangeable.
The correct capacitor depends on the motor's electrical configuration and the specifications provided by the manufacturer.
Before ordering, record the information printed on the original capacitor:
Capacitance in microfarads.
Rated voltage.
Capacitor type.
Connection method.
Dimensions and mounting system, if necessary.
Warning: A capacitor may retain an electrical charge after the power supply has been disconnected. Inspection and replacement must be carried out by a qualified person.
Do not attempt to force a motor to start if it is behaving abnormally.
The switch controls the planer thicknesser's electrical power supply.
Our category includes a single-phase switch with 4 pins, an additional earth connection and an emergency stop device, type DKLD 15A-250V or CK21.
Replacing a switch requires careful verification of the original model's specifications.
In particular, check:
The number of pins.
The arrangement of the connections.
The presence of an earth connection.
The rated voltage.
The rated current.
The housing dimensions.
The start and stop control system.
Two switches that look similar externally may have different electrical configurations.
Never install an incompatible switch or bypass any of the machine's safety devices.
All electrical work must be carried out by a qualified person in accordance with the manufacturer's wiring diagram.
The adjustment handwheel operates the mechanism used to raise and lower the thicknessing table.
It helps set the working height and, consequently, the final thickness of the wooden workpiece.
Our selection includes a table height adjustment handwheel for the Holzmann HOB260ECO(SMW2).
This component may need replacing if it is broken, cracked or its mounting system is damaged.
A damaged handwheel may make adjustment difficult or prevent proper operation.
However, if the adjustment mechanism is blocked, the handwheel is not necessarily responsible.
The associated mechanical components should be inspected before applying excessive force to the control.
As this handwheel is associated with a specific machine version, always verify its compatibility with your HOB260ECO SMW2.
Our category includes a handle, position 3 on diagram LT02, offered for the Holzmann HOB260ECO and HOB260ECOSMW2 planer thicknessers.
This handle is an operating or handling component associated with the mechanism in which it is installed.
It may need replacing if it is broken, deformed or its mounting system no longer allows proper operation.
Before ordering, identify the part precisely on exploded diagram LT02.
Check that position 3 corresponds to the component you require.
A handle that looks similar to one fitted to another machine is not necessarily compatible.
It is also important to inspect the associated mechanism before reassembly.
The cutterblock guard is one of the planer's safety components.
It helps limit exposure to the cutting area in accordance with the machine's design.
Our selection includes a cutterblock guard, position 35, offered for the Holzmann HOB260ECO and Bernardo ADH250 models listed on its product page.
A broken or deformed guard, or one whose mechanism does not operate correctly, must be inspected before the machine is used again.
The replacement must match the specifications of the original component.
In particular, it is important to check its shape, dimensions and mounting system.
Never use your planer if the cutterblock guard is missing, damaged or ineffective.
Protective devices must always be kept in proper working condition.
Chip extraction is essential for the proper operation of a planer thicknesser.
Our selection includes a chip collector outlet for the Holzmann HOB260ECO and Bernardo ADH250.
This component helps direct wood chips towards the collection or dust extraction system, depending on the machine's configuration.
A broken, cracked or deformed collector outlet may obstruct chip removal.
It may also make connecting the extraction system more difficult.
Before ordering, check the shape of the part, its mounting system and compatibility with your machine version.
During maintenance, also inspect the extraction system and remove accumulated wood chips in accordance with the manufacturer's instructions.
The planer blades must be held securely in place.
Our category includes an M8 × 10 mm blade clamping screw with a hexagonal head for a 12 mm spanner, offered for several Holzmann and Bernardo planer thicknessers and combination woodworking machines.
A clamping screw may need replacing if its thread, head or structure is damaged.
A deteriorated fastening component may compromise the secure positioning of the cutting elements.
Before ordering, always check the dimensions of the original screw and the compatibility information.
Never use a screw with unsuitable dimensions or specifications to secure the planer blades.
Blade installation and adjustment must be carried out with the machine unplugged, in accordance with the manufacturer's instructions.
Do not use the machine unless the cutting elements are securely clamped.
The Holzmann HOB260ECO is available in different versions.
Some parts may be shared by several models, while others correspond to a particular configuration.
It is therefore important not to assume that all parts for the HOB260ECO and HOB260ECO SMW2 are automatically interchangeable.
This precaution applies in particular to:
Electrical components.
Motors.
Transmission parts.
Adjustment components.
Protective devices.
The HOB260ECO designation on a product page is not always sufficient to confirm compatibility with the SMW2 version.
It is essential to consult the list of compatible machines for each part.
The serial number and manufacturing date may also be necessary to identify the correct component.
Some parts offered in this category are also intended for Bernardo ADH250 or ADH250P machines.
This applies in particular to several components whose product pages explicitly mention these models.
However, this does not mean that all parts used on Holzmann and Bernardo machines are identical.
Specifications may vary depending on the version and manufacturing period.
A part compatible with a Bernardo ADH250 is not necessarily compatible with every version of the Holzmann HOB260ECO SMW2.
Before ordering, always check the compatibility information specific to the part you require.
Visual similarity does not guarantee compatibility.
To order the correct component, start by identifying your machine precisely.
Record the information on its identification plate and consult the exploded parts diagram corresponding to your version.
Useful information includes:
Brand: Holzmann.
Exact model: HOB260ECO SMW2.
Serial number.
Month and year of manufacture.
Part position number on the exploded diagram.
Manufacturer's reference, where available.
Dimensions and specifications of the original component.
For a chain, check its length and position.
For a belt, check its profile and dimensions.
For a capacitor, record its capacitance, rated voltage and type.
For a switch, check the connections and electrical specifications.
For a mechanical component, also check its dimensions and mounting system.
IMPORTANT: BEFORE PURCHASING, always check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also verify the month and year of manufacture and your machine's serial number.
Regular maintenance helps identify certain signs of wear before they cause a more serious breakdown.
With the machine unplugged and in accordance with the manufacturer's instructions, periodically inspect accessible components.
Pay particular attention to the condition of belts, chains, rollers and adjustment mechanisms.
Remove wood chips and accumulated dust using the recommended methods.
Watch for unusual noises, vibrations, starting difficulties and problems feeding wood.
A change in the machine's behaviour may indicate a mechanical or electrical fault.
Do not continue using the machine if a safety-related fault is suspected.
Early diagnosis often helps limit damage and makes it easier to identify the component that needs replacing.
A localised fault does not always require replacing your entire woodworking machine.
A broken belt, damaged chain, faulty capacitor, cracked handwheel or deteriorated handle can be replaced individually when a compatible part is available.
However, it is important to identify the underlying cause of the fault.
A broken chain may indicate a blocked mechanism.
A belt that wears quickly may be associated with a damaged pulley.
A motor that refuses to start may have a capacitor or power supply problem without the motor itself being defective.
Replacing the visibly damaged component must therefore not conceal a more serious problem.
An appropriate repair allows you to retain components that are still functional and extend the service life of your planer thicknesser.
At Probois Machinoutils, discover our selection of spare parts for the Holzmann HOB260ECOSMW2 planer thicknesser to maintain your machine and replace worn or damaged components.
Explore our 704 mm and 608 mm drive chains, V-belt, 230 V motor, capacitors, switch, outfeed roller, adjustment handwheel, handle, cutterblock guard and chip collector outlet.
Each part must be selected according to the exact version of your machine and the information provided on its product page.
Looking for a part that is not included in our selection?
Send us your machine's exact model, serial number, manufacturing date and, if possible, the part's position number on the exploded diagram.
A photograph of the original component and the machine's identification plate may also help us identify it.
Order your Holzmann HOB260ECO SMW2 spare parts from Probois Machinoutils to maintain your planer thicknesser, carry out an appropriate repair and extend the service life of your machine.
