Turbine outlet connection for dust collector Ø500 mm
Steel impeller with a diameter of 230 mm, a height of 85 mm and a diameter of 16 mm with a special wedge seat for various chip vacuum cleaners
Wheel for chip vacuum cleaners of all brands like those presented below - Sold individually
Turbine dia 350x110x24 mm for differents dust collector
Turbine metal blades curved to the left diameter 300 mm for dust collector
Gasket, reference 29, fitted between the impeller housing outlet and the outlet connector on various Holzmann, Leman, Jean l'Ébéniste and Bernardo dust collectors.
Sealing gasket reference 43 for the impeller housing, suitable for various Holzmann, Leman, Jean l'Ébéniste, Holzprofi Starter and Bernardo dust collectors.
A dust collector is an essential piece of equipment in any woodworking workshop. Connected to woodworking machines such as planers, thicknessers, table saws, spindle moulders, bandsaws or sanding machines, it collects wood chips and dust produced during machining.
With regular use, some components can become worn, damaged or clogged, resulting in reduced extraction performance. At Probois Machinoutils, we offer a selection of spare parts for Holzprofi and Jean l'Ébéniste dust collectors to help you maintain, repair and extend the service life of your dust extraction equipment.
A dust collector consists of several mechanical, electrical and filtration components. Each component contributes to maintaining sufficient airflow and efficient collection of wood chips and dust.
Depending on the model of your Holzprofi or Jean l'Ébéniste dust collector, you may find replacement parts such as:
Replacing a worn or damaged component can often restore the performance of your dust collector without having to replace the complete extraction system.
The bags are among the most important consumable parts of a woodworking dust collector.
The filter bag allows the airflow generated by the fan to pass through while retaining wood dust and fine particles. A damaged, clogged or excessively worn filter bag can significantly reduce the extraction capacity of the system.
The collection bag receives the chips and waste extracted from woodworking machines. It should be replaced if it becomes torn, perforated or can no longer be securely attached to the collector.
When selecting a replacement bag, always check its diameter, dimensions and attachment system, as these may vary between dust collector models.
The impeller, sometimes referred to as the fan wheel, is one of the key components of a dust extraction system. Driven by the motor, it generates the airflow required to transport chips and dust through the extraction hose.
An impeller can become damaged if larger pieces of wood, screws, offcuts or other foreign objects enter the extraction system.
A damaged or deformed impeller may cause:
Replacing the impeller can restore the correct operation of the dust collector, provided that the motor and other components are still in good condition.
Electrical components can also require replacement during the service life of a Holzprofi or Jean l'Ébéniste dust collector.
Depending on availability and machine model, our range may include motors, switches, capacitors and other electrical components used for the repair and maintenance of woodworking extraction equipment.
Before replacing an electrical component, always check the voltage, power rating, connection type and technical specifications of the original part.
Efficient dust extraction helps keep a woodworking workshop cleaner and limits the accumulation of chips and dust around machinery.
A reduction in extraction performance does not necessarily mean that the complete dust collector needs replacing. Before considering a new machine, it is useful to inspect the main components of the existing system.
Check the condition of the filter, collection bag, extraction hoses, connections, impeller and motor. A clogged filter, leaking hose or damaged impeller can considerably reduce airflow.
Regular maintenance and timely replacement of worn parts help preserve the performance and service life of your dust extraction system.
Holzprofi and Jean l'Ébéniste dust collectors may have been produced in different versions over the years. Components can therefore vary even between machines with similar model names.
IMPORTANT: BEFORE PURCHASING, carefully check the list of compatible machines shown on each product page. Depending on the spare part, it may also be necessary to check the month and year of manufacture and the serial number of your dust collector.
Whenever possible, compare the dimensions, mounting points, electrical specifications and appearance of the original component with the replacement part shown on our website.
At Probois Machinoutils, we specialise in spare parts for woodworking machines and workshop equipment. Our catalogue includes replacement components for dust collectors as well as many other Holzprofi and Jean l'Ébéniste woodworking machines.
Our spare parts range is regularly updated according to manufacturer availability and customer requirements.
Whether you need a filter bag, collection bag, impeller, motor, switch, capacitor or another dust extraction component, browse this category to find the replacement part suitable for your Holzprofi or Jean l'Ébéniste dust collector.
Repairing and maintaining your existing dust extraction system is an effective way to extend its service life and keep your woodworking workshop equipment operating efficiently.
