Poly V belt 736J4 (290J) for the scoring saw on Holzmann KF315VF-2000 spindle moulder saw and TS315VF-2600 or TS315VF-3200 format saw, Leman COM310
Outer flange reference C43 for Holzmann circular saw TS315VF2600, TS315VF3200 and reference D43 for Holzmann KF315VF2000 or KF315VF2600 spindle moulder-saw
MS10x25 screw, C45 mark for Holzmann TS315VF2600, TS315VF3200 circular saw and D45 mark for Holzmann KF315VF2000 or KF315VF2600 Sliding table saw
400V motor for Holzmann format saw
Original Holzmann mitre gauge knob for TS315VF2000, TS315VF2600 and TS315VF3200 sliding table saws.
Are you looking for spare parts for your Holzmann TS315VF-3200 sliding table saw? At Probois Machinoutils, you will find a selection of components for maintaining, repairing and replacing worn parts on your machine.
The Holzmann TS315VF-3200 is a sliding table saw equipped with a large 3200 mm sliding table, particularly suitable for processing panels and cutting operations requiring a large travel capacity.
This machine is equipped with a scoring system designed to improve cutting quality when working with coated panels. Like any woodworking machine, it also contains various mechanical and electrical components that may wear out or require replacement over time.
In this category, we currently offer a 736J4 Poly-V scoring belt, a 400V replacement motor, a C43 saw blade flange, an M10 × 25 C45 screw and a mitre fence locking knob.
These parts perform very different functions. It is therefore essential to identify the exact component required and the precise version of your machine before ordering.
Our selection includes several important components for different mechanisms of this sliding table saw.
For the scoring unit drive, you will find a 736J4 Poly-V belt, also designated 290J.
For the motor, we offer a 400V replacement motor compatible with the corresponding Holzmann TS315VF-2600 and TS315VF-3200 versions.
For the saw blade mounting system, a C43 blade flange and an M10 × 25 C45 screw are available.
For the mitre fence, we also offer an original Holzmann locking knob used on several TS315VF versions.
Some of these parts are shared with the TS315VF-2600 and other Holzmann machines. However, this does not mean that all components from the different TS315VF versions are interchangeable.
Always check the compatibility information provided on the individual spare part page before ordering.
The 736J4 Poly-V belt, also designated 290J, is intended for the scoring unit drive system of the Holzmann TS315VF-3200 sliding table saw.
The scoring blade is positioned ahead of the main saw blade and makes a preliminary cut in the panel before the main blade passes through it.
When correctly adjusted, this system helps reduce chipping on the underside of coated panels, particularly melamine-faced and laminated boards.
For the scoring unit to perform this function correctly, its drive system must remain in good condition.
The Poly-V belt transmits movement to the corresponding mechanism.
Over time, this belt can deteriorate due to mechanical stress, incorrect tension or an alignment problem.
A worn belt may cause irregular scoring unit operation, vibrations or unusual noises.
Inspect the belt if the scoring unit is no longer operating normally or if you notice a problem with its drive system.
A belt showing cracks, damaged ribs, deformation or significant wear should be replaced.
Before ordering, always check the reference marked on your original belt.
The belt offered here has the reference 736J4, also designated 290J.
It is offered for the Holzmann TS315VF-2600 and TS315VF-3200, as well as for certain other compatible machines.
Important: the 736J4 belt used on the TS315VF-2600 and TS315VF-3200 must not be confused with the 914J7 scoring belt used on the TS315VF-2000.
These two belts are different and are not interchangeable.
The 400V replacement motor offered in this category is intended for compatible versions of the Holzmann TS315VF-2600 and TS315VF-3200 sliding table saws.
The motor provides the mechanical power required to operate the cutting system.
Over time, motor failure may result in various symptoms, including starting difficulties, loss of power, unusual noises, irregular operation or excessive overheating.
However, the presence of one of these symptoms does not automatically mean that the motor itself has failed.
An electrical fault upstream of the motor, a drive system problem or abnormal mechanical resistance may also prevent the machine from operating correctly.
Before ordering a new motor, it is therefore strongly recommended to carry out an accurate diagnosis.
In particular, check the machine's supply voltage and the information shown on the rating plate of the original motor.
The Holzmann TS315VF with 3200 mm sliding table exists in different electrical configurations.
The motor offered in this category is a 400V motor.
It must therefore not be considered compatible with a 230V machine simply because that machine also carries the TS315VF-3200 designation.
Before purchasing, always check the rating plate of your machine and the rating plate of the original motor.
If there is any doubt about a motor fault, electrical checks should be carried out by a suitably qualified person.
The C43 saw blade flange is part of the blade mounting system on the Holzmann TS315VF-2600 and TS315VF-3200 sliding table saws.
The same component is also offered for certain Holzmann KF315VF combination saw and spindle moulder machines, where it corresponds to position D43.
The flange helps position and secure the blade on its shaft.
Its condition is therefore important for ensuring that the blade is correctly installed.
Deformation, damaged contact surfaces or abnormal wear may make replacement necessary.
When changing a saw blade, take the opportunity to inspect the mounting components and make sure that they show no visible signs of damage.
Before carrying out any work on the blade, disconnect the machine from the power supply and wait until all moving parts have stopped completely.
For the Holzmann TS315VF-3200, the flange offered corresponds to position C43 in the exploded view.
The M10 × 25 screw, position C45, is offered for the Holzmann TS315VF-2600 and TS315VF-3200 sliding table saws.
On certain compatible Holzmann KF315VF combination saw and spindle moulder machines, the same component corresponds to position D45.
A fixing component may need to be replaced when its thread is damaged, its head is deteriorated or it is deformed in a way that prevents correct assembly.
For this type of component, visual similarity alone is not sufficient.
The thread diameter, thread pitch, screw length and other specifications must correspond to the original part.
The component offered here has the dimensions M10 × 25 and corresponds to position C45 on the TS315VF-3200.
Before ordering, check this information against the original component and the exploded view of your machine.
The mitre fence locking knob is an original Holzmann spare part designed for the angular fence adjustment system.
It allows the selected setting to be secured so that the fence remains in the required position during use.
This knob is offered for Holzmann TS315VF sliding table saws equipped with 2000, 2600 and 3200 mm sliding tables.
Over time, the knob or its thread may become damaged and no longer provide adequate locking.
If the mitre fence no longer remains in the selected position, however, inspect the entire mechanism before concluding that the knob is responsible.
A thread, mounting or positioning problem involving another component may also be the cause.
If the scoring unit is no longer operating normally, several checks should be carried out before replacing a component.
Start by checking the condition of the 736J4 Poly-V belt.
A loose or damaged belt, or one with deteriorated ribs, may interfere with power transmission.
Also check the condition and adjustment of the scoring blade.
An incorrectly adjusted scoring unit may cause chipping or a poor finish even if the belt itself is in good condition.
The position of the scoring blade in relation to the main blade also plays an important role in the cutting quality achieved on coated panels.
If you notice vibrations, unusual noises or abnormal operation, stop the machine before carrying out the necessary checks.
No. A machine that will not start does not necessarily have a defective motor.
The problem may originate from the electrical supply, a control component, a safety device, a connection or another electrical component.
Abnormal mechanical resistance may also prevent the motor from operating correctly.
It is therefore preferable to identify the exact cause of the fault before ordering the 400V motor.
If the motor overheats, produces an unusual noise or suffers a significant loss of power, stop using the machine until the cause of the problem has been identified.
All electrical work must be carried out with the machine disconnected from the power supply and by a suitably qualified person.
Unusual vibration does not necessarily originate from the motor.
Start by checking the main saw blade.
A damaged, blunt or incorrectly installed blade can generate vibrations and reduce cutting quality.
Also check its mounting system, particularly the blade flange.
If the vibration occurs when the scoring unit is being used, also inspect the 736J4 belt and the components of its drive system.
Vibrations may also be caused by incorrect adjustment or another mechanical component.
A machine displaying significant vibration should not continue to be used without first being inspected.
Chipping on melamine-faced or coated panels may be related to the adjustment of the scoring unit, but this is not the only possible cause.
First check the condition of the blades being used.
A blunt main blade or one unsuitable for the material can significantly reduce cutting quality.
The scoring blade must also be in good condition and correctly positioned in relation to the main blade.
If the scoring unit is not rotating normally, check its drive system and particularly the 736J4 belt.
A methodical diagnosis helps avoid replacing a component unnecessarily when it is not responsible for the problem.
A sliding table saw equipped with a 3200 mm sliding table should be maintained regularly to preserve its accuracy and correct operation.
Before carrying out any work, disconnect the machine from the power supply.
Regularly clean accessible areas to prevent excessive accumulation of sawdust and dust.
Inspect the main blade and scoring blade and replace cutting tools when they are worn or damaged.
Also inspect the blade mounting components, particularly the flange.
Monitor the condition of the belts and look for cracks, deformation or damaged ribs.
The sliding table should continue to move smoothly without abnormal tight spots.
The fences and their locking devices must also operate correctly to ensure reliable positioning of workpieces during cutting.
Finally, any unusual noise, vibration or change in the machine's behaviour should be investigated before continuing to use it.
The TS315VF model designation alone is not always sufficient to identify the correct spare part.
Before ordering, record as much information as possible about your machine:
Brand: Holzmann.
Exact model: TS315VF.
Version: 3200 mm sliding table.
Supply voltage: particularly 230V or 400V depending on the machine.
Serial number.
Manufacturing month and year.
Reference marked on the original component.
Position number in the exploded view, where available.
For the scoring belt offered in this category, check the 736J4 (290J) reference.
For the blade flange, check position C43.
For the screw, check position C45 and the M10 × 25 dimensions.
For the motor offered in this category, always check that your machine corresponds to the compatible 400V version.
Some TS315VF-3200 components are also used on the TS315VF-2600. Other components may differ depending on the sliding table length, supply voltage, manufacturing period or exact machine configuration.
WARNING: BEFORE PURCHASING, make sure your machine is listed in the LIST OF COMPATIBLE MACHINES shown on the spare part product page. Where required, also check the manufacturing month and year and the serial number of your machine.
A component that looks visually similar to the one fitted to your machine is not necessarily compatible.
The different versions of the Holzmann TS315VF should not be considered identical in terms of all their spare parts.
Some references are shared between the 2600 and 3200 mm versions, including several of the components offered in this category.
However, certain components of the TS315VF-2000 are different.
This is particularly the case with the scoring belt: the TS315VF-3200 uses the 736J4 (290J) reference offered here, which is also used on the TS315VF-2600, whereas the TS315VF-2000 uses a different reference.
It is therefore important never to order a spare part based solely on the general “TS315VF” model name.
The sliding table length and the other characteristics of the machine must also be taken into account.
A localised fault does not automatically require replacement of the entire sliding table saw.
A worn belt, damaged flange, deteriorated screw or defective locking component can be replaced individually when diagnosis confirms that it is responsible for the problem.
Targeted replacement of a component can therefore help extend the service life of the machine.
However, it is essential to identify the fault correctly before ordering.
Replacing a component that is still in good condition will not solve a fault originating from another mechanism.
For work on the motor or electrical system, consult a qualified person whenever the necessary checks go beyond the maintenance operations intended for the user.
At Probois Machinoutils, discover our selection of spare parts for maintaining and repairing your Holzmann TS315VF sliding table saw equipped with a 3200 mm sliding table.
We currently offer a 736J4 (290J) Poly-V scoring belt, a 400V replacement motor, a C43 saw blade flange, an M10 × 25 C45 screw and a mitre fence locking knob.
Before ordering, carefully check the references and exact configuration of your machine.
Are you looking for another spare part for your Holzmann TS315VF-3200?
Send us the exact model, supply voltage, serial number, manufacturing month and year and, where possible, the position number of the required component in the exploded view.
This information makes it easier to identify the correct component for your machine.
Probois Machinoutils: your specialist in Holzmann machine spare parts, helping you maintain, repair and extend the service life of your TS315VF-3200 sliding table saw.
