Angle scale D17 for metal band saw Holzmann BS210TOP
Handle Wheel D27 for Holzmann BS210TOP metal band saw
D33 screw for ladder support for metal bandsaw
Discover our selection of spare parts for the Holzmann BS210TOP metal bandsaw, designed for the maintenance, repair and restoration of your machine. Replacing a worn or damaged component can extend the service life of your bandsaw and help maintain accurate and consistent cutting performance.
The Holzmann BS210TOP is a robust metal bandsaw designed for cutting tubes, profiles and various metal workpieces. Its swivelling saw arm allows straight and angled cuts, while the hydraulic lowering system enables progressive adjustment of the saw arm descent according to the material being cut.
Over time and with regular use, certain mechanical, hydraulic or electrical components may become worn. Bearings, blade guides, band wheels, hydraulic cylinder, vice components, coolant pump, switch or blade tensioning components may therefore need to be inspected or replaced.
The Holzmann BS210TOP metal bandsaw consists of numerous components that can be replaced individually. Depending on availability, this category includes various BS210TOP spare parts required for the maintenance and repair of your machine.
Available spare parts may include:
Our range of spare parts for the Holzmann BS210TOP metal bandsaw is regularly updated according to the availability of replacement components from the manufacturer.
The drive system of the Holzmann BS210TOP transfers power from the motor to the bandsaw blade to provide the movement required for cutting metal. The various transmission components are subjected to mechanical loads whenever the machine is used.
Over time, wear on gears, bearings or other drive components may result in unusual noises, vibration, excessive play or irregular blade operation.
If a drive problem occurs on a Holzmann BS210TOP, it is important to inspect the complete transmission mechanism before ordering a replacement part in order to identify the exact cause of the problem.
Correct blade guidance plays an essential role in the cutting accuracy of the Holzmann BS210TOP metal bandsaw. The blade guides keep the bandsaw blade correctly positioned as it passes through the metal workpiece.
The bearings and other blade guide components are subjected to significant loads during cutting. With regular use, they may develop excessive play, become noisy or no longer guide the blade correctly.
Worn or incorrectly adjusted BS210TOP blade guides can cause blade deviation, vibration or irregular cutting. Before assuming that a new bandsaw blade is defective, it is therefore important to check the condition and adjustment of the blade guides and bearings.
The Holzmann BS210TOP features a hydraulic cylinder for controlling the lowering speed of the saw arm. This system helps control the cutting feed and allows the descent of the saw arm to be adapted to the material and cross-section of the workpiece.
A worn or faulty hydraulic cylinder can cause the saw arm to lower too quickly, irregularly or make the lowering rate difficult to adjust. The mounting points and other components associated with the hydraulic system should also be checked if a problem occurs.
Replacing the BS210TOP hydraulic cylinder or one of its associated components can help restore smooth and correctly controlled movement of the saw arm.
Correct blade tension is particularly important on a metal bandsaw. The Holzmann BS210TOP features a gauge that allows the blade tension to be monitored.
Insufficient blade tension can cause the blade to wander during cutting, while excessive tension can place unnecessary stress on the blade, bearings, band wheels and other mechanical components.
The tensioning mechanism consists of several parts that may become worn, including shafts, screws, the tensioning handle, adjustment components and associated parts. If the blade can no longer be tensioned correctly or if the gauge indication appears abnormal, these components should be inspected.
The Holzmann BS210TOP features a robust vice with a quick-action clamping system designed to hold the metal workpiece securely during cutting.
The clamping screw, movable jaw, quick-action mechanism, shafts, handle and other vice components are regularly subjected to mechanical stress. Wear in these parts can cause excessive play or make it more difficult to clamp the workpiece securely.
A vice in good condition is essential to prevent the material from moving during cutting. Incorrect clamping can reduce cutting accuracy, result in irregular cuts and place additional stress on the bandsaw blade.
The saw arm of the Holzmann BS210TOP can be swivelled to perform different angled cuts. The pivot mechanism, locking lever, shafts and adjustment components must remain correctly adjusted to maintain the accuracy of the machine.
If excessive play develops or the cutting angle becomes difficult to adjust or lock securely, the different components of the swivelling mechanism should be inspected.
Replacing a worn Holzmann BS210TOP saw arm adjustment component can help restore accurate adjustment and secure locking of the saw arm.
The Holzmann BS210TOP is equipped with a coolant system designed to assist during metal cutting operations. Depending on the fault encountered, various components of the coolant circuit may require cleaning, inspection or replacement.
A coolant pump that no longer operates correctly, a blocked line or another faulty component can prevent the cutting fluid from circulating correctly.
Before replacing the BS210TOP coolant pump, it is advisable to check its electrical supply and inspect the different components of the coolant circuit to identify the exact cause of the problem.
The Holzmann BS210TOP features an automatic shut-off system at the end of the cutting cycle. When the saw arm reaches its lower position, the system operates the control mechanism and stops the machine.
The mechanical and electrical components involved in this function must remain correctly adjusted and in good condition. If the machine no longer stops correctly at the end of the cut, the relevant components should be checked before continuing to use the bandsaw.
The electrical system includes various components required for starting, controlling and operating the machine. A damaged switch or faulty electrical component may prevent the bandsaw from starting or cause abnormal operation.
The Holzmann BS210TOP is available in different electrical configurations, including 230 V and 400 V versions. Some electrical components may therefore differ depending on the version of the machine.
Before ordering an electrical spare part for the Holzmann BS210TOP, always check the supply voltage, the specifications of the original component and the information shown on the machine identification plate.
Before carrying out any work on the electrical system, completely disconnect the machine from the power supply. Electrical repairs requiring specific expertise should be carried out by a suitably qualified person.
Regular maintenance helps extend the service life of the machine and reduce premature component wear. Metal chips should be regularly removed from around the blade guides, band wheels, vice and other moving parts.
Periodically check the condition and tension of the bandsaw blade, blade guides, bearings, drive components, hydraulic cylinder, vice and coolant system. Any excessive play, unusual noise or abnormal operation should be investigated before continuing to use the machine.
A wandering cut is not necessarily caused by a defective bandsaw blade. Incorrectly adjusted guides, worn bearings, incorrect blade tension, incorrect saw arm lowering adjustment or inadequate workpiece clamping can also cause cutting problems.
Regular inspection of the wear parts on the Holzmann BS210TOP can help identify a faulty component before it causes additional wear or damage to other parts.
The blade is one of the main consumable parts of a metal bandsaw. The Holzmann BS210TOP uses a blade measuring 2110 mm in length and 20 mm in width. The appropriate tooth pitch should then be selected according to the material, shape and thickness of the workpiece being cut.
A worn or damaged blade, or a blade with an unsuitable tooth pitch, can result in slow, irregular or inaccurate cutting. Replacing the blade does not eliminate the need to check the blade guides, bearings and tensioning system.
When purchasing a bandsaw blade for the Holzmann BS210TOP, always check the required dimensions and select a tooth pitch suitable for your application.
Before ordering a spare part for your Holzmann BS210TOP metal bandsaw, consult the exploded diagram and spare parts list corresponding to your machine to accurately identify the required component and its position number.
This check is particularly important for electrical components, transmission parts, hydraulic components and coolant system parts. Some part references may differ depending on the version or production period of the machine.
IMPORTANT: BEFORE PURCHASING, always check the LIST OF COMPATIBLE MACHINES shown on the spare part product page. Depending on the component, you may also need to check the month and year of manufacture and the serial number of your machine.
Not all spare parts for the Holzmann BS210TOP metal bandsaw are necessarily listed in our online catalogue. If you cannot find the component you need, consult the exploded diagram of your machine to identify its position number.
To help identify the correct spare part, provide the exact model of the bandsaw, its supply voltage, serial number, manufacturing date and the position number of the required component.
A photograph of the original part together with its main dimensions can also help with identification, particularly when a part number has changed or when several versions exist.
A faulty bearing, damaged blade guide, hydraulic cylinder problem, worn vice component, faulty coolant pump, switch or blade tensioning component does not necessarily mean that the complete bandsaw needs to be replaced.
Many mechanical, hydraulic and electrical components can be replaced individually to repair your Holzmann BS210TOP metal bandsaw, restore correct operation and extend its service life.
Probois Machinoutils offers a constantly evolving range of spare parts for Holzmann metal bandsaws to help with the maintenance, repair and restoration of your machines.
Browse our Holzmann BS210TOP spare parts and use the exploded diagram together with the information shown on your machine to accurately identify the replacement component you need.
Add a concise technical specifications section
