Handle for small router drives corresponding to item 20D in the exploded view.
Handle for the small router trainers corresponding to item 03D1 and 03D-2 in the exploded view.
Handle for small router drivers corresponding to item 19D-2 in the exploded view.
6x6x15mm carbon brush set for small power feeder
Contactor for power feeder type Maggi STEFF2032 mono
A power feeder is an essential accessory for improving consistency, safety and working comfort when using a spindle moulder or other woodworking machine. Mounted on the machine, it automatically feeds the workpiece at a constant speed using powered feeder wheels that keep the timber firmly against the table and fence.
With regular use, certain mechanical and electrical components can wear out, become damaged or require replacement. Probois Machinoutils offers a selection of spare parts for Holzprofi power feeders, allowing you to maintain, repair and extend the service life of your equipment.
Depending on the model, you can find replacement parts for Holzprofi VSHPM3, VSHP32 and other compatible power feeders.
A woodworking power feeder contains numerous mechanical, transmission and electrical components that work together to provide smooth and consistent workpiece feeding.
Depending on the model and version of your Holzprofi power feeder, replacement parts may include:
feeder wheels and rollers;
gears and pinions;
transmission components;
chains;
bearings;
shafts and axles;
motor carbon brushes;
switches;
electrical components;
adjustment handles;
support arm components;
screws, fasteners and mechanical parts.
A worn component can cause irregular feeding, loss of grip on the workpiece, unusual vibrations or noises, or even prevent the power feeder from operating correctly.
The feeder wheels are among the most important components of a power feeder. They remain in contact with the workpiece and provide both the feeding force and the pressure required to keep the timber correctly positioned against the machine table and fence.
With use, the wheel covering can gradually wear, harden, crack or lose its grip.
Worn feeder wheels can cause:
slipping on the workpiece;
irregular feeding;
insufficient pressure;
marks on the timber;
reduced machining accuracy.
Replacing worn power feeder wheels or rollers helps restore good grip and smooth, consistent feeding.
Before ordering, always check the diameter, width, bore and mounting system of the original wheel.
The transmission system of a power feeder contains several components that transfer the movement of the motor to the feeder wheels.
Depending on the model, the mechanism may include gears, pinions, chains, shafts, axles, bearings and other transmission components.
A damaged or heavily worn gear tooth can cause knocking noises, jerky movement or prevent one or more feeder wheels from rotating correctly.
If a transmission problem occurs, it is advisable to inspect the complete mechanism to identify the exact component responsible for the fault.
Some Holzprofi power feeders use electrical components that are subject to wear over time.
Motor carbon brushes, where fitted, are wear parts that should be inspected if the motor runs intermittently, becomes difficult to start or no longer operates correctly.
Depending on the model, switches and other electrical components may also need to be replaced.
Before ordering an electrical spare part, carefully check the voltage, dimensions, connections and references printed on the original component.
Two electrical components that look identical are not necessarily technically compatible with the same power feeder.
The Holzprofi VSHPM3 is a compact power feeder designed for use with spindle moulders and other woodworking machines where a smaller feeding unit is required.
Various replacement parts can help keep these feeders in service for many years, including feeder wheels, gears, carbon brushes and other mechanical components.
When searching for a spare part for a VSHPM3, use the exploded parts diagram and the corresponding part number or position number whenever possible. This helps identify the correct replacement component and reduces the risk of ordering an incompatible part.
Larger Holzprofi power feeders such as the VSHP32 are designed to provide consistent workpiece feeding on spindle moulders and other woodworking machines requiring a more robust feeding system.
The pressure applied by the feeder wheels, repeated adjustment and extended operating hours can gradually cause wear to certain mechanical components.
Replacing worn feeder wheels, transmission components, adjustment parts or electrical components can restore correct operation without replacing the complete power feeder.
A correctly maintained power feeder contributes directly to the quality and consistency of machining operations.
A constant feed speed helps produce a more uniform finish and reduces variations that can occur when a workpiece is fed manually.
The feeder wheels also help keep the timber firmly positioned against the fence and machine table as it passes the cutting tool.
It is therefore advisable to regularly check:
condition of the feeder wheels;
grip of the wheel surface;
transmission operation;
excessive mechanical play;
condition of gears and bearings;
tightness of mechanical components;
motor and electrical controls.
Regular maintenance can identify a worn component before it causes damage to other parts of the power feeder.
A power feeder contains numerous replaceable components. A fault therefore does not necessarily mean that the complete unit needs to be replaced.
Replacing a feeder wheel, gear, bearing, carbon brush, switch or other mechanical component may be enough to restore correct operation.
This is particularly useful for older Holzprofi power feeders that are still used daily in woodworking and joinery workshops.
Several generations and versions of Holzprofi power feeders may have been produced over the years, and certain components can differ depending on the model or production period.
IMPORTANT: BEFORE PURCHASING, CHECK THE LIST OF COMPATIBLE MACHINES. Depending on the spare part, the month and year of manufacture and the serial number of your power feeder may be required to confirm compatibility.
Whenever possible, also use the position number shown on the exploded parts diagram to identify the required component.
For feeder wheels, gears and other mechanical parts, compare the dimensions of your original component with those specified on the product page.
Probois Machinoutils offers a selection of spare parts for Holzprofi power feeders to help maintain and repair these useful woodworking accessories.
Whether you are looking for a feeder wheel, roller, gear, bearing, carbon brush, switch or mechanical component, browse the available replacement parts and check their compatibility with your power feeder model.
Replacing only the worn or damaged component is an effective way to extend the service life of your Holzprofi power feeder while maintaining smooth, consistent and reliable workpiece feeding.
