Plate for scroll saw Scheppach SD1600V - Item 17
Coals for scroll saw Scheppach Woodstar SD1600V, Parkside PDS120A1 and Mac Allister
Hinge bracket for scroll saw Kity SAC405F and Scheppach Decoflex
Blade holder bottom 88002173 for scroll saw
Air hose for scroll saw Scheppach SD1600V
Complete rod marks 73 + 74 + 78 + 81 + 84 + 91 + 117 for scroll saw Scheppach SD1600V
Blade holder support for Scheppach SD1600V scroll saw - Item 1
Bellows for scroll saw Scheppach SD1600V
Light plate for scroll saw Scheppach SD1600V
Inverter for scroll saw Scheppach SD1600V
Rocker lever for scroll saw Scheppach, Mac Allister, Dexter and Parkside
Quick clamp holder for saw blades without cross pin for scroll saw Scheppach
Blade holder top 88002172 for scroll saw
This original foam damping ring eliminates vibration and play at the upper pivot arm of your scroll saw. It helps ensure smooth, quiet operation while maintaining the correct movement of the saw arm.
Are you looking for a spare part for your Parkside PDS 120 A1 scroll saw to repair a fault, replace a worn component or extend the service life of your machine? At Probois Machinoutils, we offer a selection of replacement parts designed for the maintenance and repair of this scroll saw, also identified by the reference PDS120A1.
The Parkside scroll saw is a popular machine among DIY enthusiasts, model makers and woodworkers. It is designed for producing fine cuts, curves, decorative shapes and intricate patterns in materials suitable for its cutting capacity.
Over time, certain mechanical and electrical components may wear out, become damaged or develop faults. Replacing a defective component can sometimes restore normal operation without having to replace the entire machine.
Our catalogue includes motor carbon brushes, electronic circuit boards, speed controllers, blade holders, bellows, air tubes, lamps, table inserts and oscillating mechanism components for the Parkside PDS 120 A1 scroll saw.
The Parkside PDS 120 A1 scroll saw operates through a mechanism that converts the motor's rotary motion into the reciprocating movement of the saw blade. Several components contribute to transmitting this movement, securing the blade and improving operating comfort.
Our selection includes different types of replacement parts:
Each replacement part must be selected according to the exact machine reference and the list of compatible models provided on its product page.
Motor carbon brushes for Parkside scroll saws are electrical components found in commutator motors. They maintain electrical contact with the rotating part of the motor and gradually wear down during operation.
When the brushes become too short or damaged, the motor may experience starting difficulties, intermittent operation or unusual variations in speed.
We offer motor carbon brushes, reference 5901403006, designed for various Scheppach, Woodstar, Parkside, Dexter and Mac Allister scroll saws according to the compatibility information.
Before replacing the carbon brushes, check their condition, dimensions and the correct operation of their holders. A starting problem is not necessarily caused by worn brushes: the power supply, switch and other electrical components may also be responsible.
The electronic circuit board for Parkside scroll saws forms part of the machine's electrical control system. A defective circuit board may interfere with motor operation or other electrical functions.
Our catalogue includes an electronic circuit board, reference 5901403005, corresponding to position 17 on certain exploded diagrams for Scheppach, Parkside, Dexter and Mac Allister scroll saws.
A machine that no longer starts or operates irregularly may have an electronic fault. However, these symptoms alone do not confirm that the circuit board is defective.
Before ordering, it is essential to inspect the electrical system and compare the original component reference with the replacement part offered.
Work on electronic circuit boards must be carried out by a qualified person with the machine disconnected from the power supply. Never modify the wiring or bypass a safety device.
The electronic speed controller for scroll saws allows the operating speed to be adjusted on machines equipped with this feature.
Being able to adjust the speed is particularly useful for scroll sawing, as cutting requirements may vary depending on the material thickness, its properties and the complexity of the cutting pattern.
We offer an electronic speed controller, reference 5901403011, designed for various Scheppach, Woodstar, Parkside, Dexter and Mac Allister scroll saws.
If the speed adjustment system no longer works correctly, it is important to check the entire control system before concluding that the controller is defective.
Compatibility must be confirmed using the exact machine model, its version and the references listed on the product page.
The blade holder for the Parkside PDS 120 A1 scroll saw plays an essential role in keeping the blade securely positioned during cutting operations.
A damaged, bent or excessively worn holder may affect blade retention and make precision cutting more difficult.
Our catalogue includes several blade holder references:
Please note that these references are not necessarily interchangeable. It is important to distinguish between upper and lower blade holders, as well as blade fixing systems with or without pins.
Before ordering, check the design of your blade holding system and the exact compatibility of the replacement part with your Parkside PDS 120 A1.
The air-blowing system on the Parkside scroll saw helps remove sawdust produced during cutting, allowing better visibility of the cutting line.
This system includes a bellows and an air tube that direct airflow towards the working area.
We offer two components for this system:
A torn, cracked or damaged bellows may reduce the effectiveness of the air-blowing system. Similarly, a damaged, blocked or incorrectly positioned tube can prevent sawdust from being cleared properly.
These components improve working comfort, especially during intricate cutting operations where following a precise line is essential.
The table insert for scroll saws is positioned around the blade opening in the worktable.
It helps provide a suitable working surface around the cutting area and limits unnecessary gaps close to the blade.
We offer a table insert, reference 5901403008, which replaces the previous reference 5901403039.
This component is listed for various Scheppach, Woodstar, Parkside, Dexter and Mac Allister scroll saws.
A cracked, broken or missing table insert, or one with a damaged blade opening, may need to be replaced.
Before purchasing, check its dimensions and shape to ensure that it matches your machine's worktable.
The lamp for Parkside scroll saws illuminates the working area, making it easier to follow the cutting line during detailed work.
Suitable lighting is particularly useful for scroll sawing, cutting small components and creating complex shapes.
Our catalogue includes a lamp, reference 5901403016, offered for certain Scheppach, Woodstar, Parkside and Mac Allister scroll saws.
If the lamp no longer works, check its power supply, connections and general condition before considering replacement.
The replacement component must match the lighting system specified by the manufacturer. Electrical modifications not approved by the manufacturer should never be attempted.
The oscillating mechanism of a Parkside PDS 120 A1 scroll saw includes several mechanical components that contribute to the reciprocating movement of the blade.
Over time, some of these components may develop wear, deformation or excessive play.
We offer several replacement parts, including:
These components should be inspected if unusual mechanical noises, excessive play or irregular movement occur during operation.
It is important to check the joints, fasteners and overall condition of the mechanism before replacing a component.
The presence of a reference in this category does not guarantee compatibility with every version of the Parkside PDS 120 A1. Always refer to the compatible machine list.
The foam cushioning ring for scroll saws helps reduce vibrations and mechanical play around the upper oscillating arm shaft on machines equipped with this type of component.
We offer a cushioning ring, reference 88000028, designed for the mechanism of certain scroll saws.
A worn, deformed or damaged cushioning ring may cause increased vibration or play around the corresponding joint.
Before replacing this component, check the condition of the shaft, brackets and other mechanical parts to identify the cause of the problem.
Replacement must be carried out in accordance with the manufacturer's instructions, without modifying the geometry or operating characteristics of the oscillating mechanism.
Before ordering a spare part for your Parkside PDS120A1 scroll saw, it is essential to identify your machine accurately.
The Parkside range includes several scroll saw versions, particularly the PDS 120 A1, PDS 120 B2 and PDS 120 B3.
These models may differ in their electrical components, blade holding systems and mechanical parts.
To avoid ordering the wrong replacement part, we recommend the following checks:
IMPORTANT: BEFORE PURCHASING, CHECK THE EXACT MODEL OF YOUR MACHINE, ITS MONTH AND YEAR OF MANUFACTURE, AND ITS SERIAL NUMBER. ALWAYS CONSULT THE LIST OF COMPATIBLE MACHINES ON EACH PRODUCT PAGE.
Several symptoms may indicate that a component of your Parkside PDS 120 A1 scroll saw needs inspection.
A motor that no longer starts, a speed controller that no longer responds, unusual vibrations or a blade that cannot be secured correctly may have several different causes.
Similarly, an ineffective air-blowing system may result from damaged bellows, a blocked air tube or incorrect positioning.
Poor cutting quality may also be caused by a worn blade, incorrect blade tension or a defective blade holding system.
It is therefore important to diagnose the problem before replacing a component. This helps identify the actual cause of the malfunction and avoids purchasing unnecessary replacement parts.
Regular maintenance helps preserve the precision and proper operation of your Parkside scroll saw.
After use, it is advisable to remove dust and sawdust accumulated around the worktable, blade holders and accessible areas of the mechanism.
The condition of the blades, their fixing, tension and the operation of the air-blowing system should also be checked regularly.
Mechanical components should be inspected if unusual vibrations or noises occur. Any lubrication operations must follow the instructions provided in the user manual.
Before cleaning, inspecting or repairing the machine, disconnect it from the electrical supply and wait until all moving parts have come to a complete stop.
Work involving the electronic circuit board, speed controller or other electrical components must be entrusted to a qualified person. Protective devices and safety systems must never be bypassed or disabled.
At Probois Machinoutils, we offer a selection of spare parts for the Parkside PDS 120 A1 scroll saw to make maintaining and repairing your machine easier.
Our catalogue includes electrical components, blade fixing elements, oscillating mechanism parts and accessories designed to improve operating comfort.
Certain references may also be suitable for Scheppach, Woodstar, Kity, Dexter or Mac Allister scroll saws, but only when this compatibility is expressly stated on the relevant product page.
Our selection evolves according to parts availability and the repair needs of scroll saw users.
Discover our replacement parts for Parkside PDS120A1 scroll saws: motor carbon brushes, electronic circuit boards, speed controllers, blade holders, bellows, air tubes, lamps, table inserts, rods and other mechanical components.
Before ordering, carefully check the references and compatibility information to select the correct component for your machine and help extend its service life under appropriate operating conditions.
