Has your Woodstar or Woodster table saw been serving you for several years and is one of its parts beginning to show signs of wear? A faulty switch, worn carbon brushes, a damaged fence or a broken table insert does not necessarily mean that the entire machine needs to be replaced. If the saw is still working properly overall, a targeted repair can often extend its service life at a much lower cost.

This category brings together spare parts for Woodstar and Woodster table saws, particularly for the ST8, ST10E, ST10L, ST10L² and ST10S models, depending on the part reference. You can find motors, armatures, carbon brushes, switches, rip fences, mitre gauges, table inserts, blade guards, flanges, aluminium profiles, gear components and various adjustment parts.

Why repair a Woodstar table saw?

A table saw is a machine you quickly become familiar with: fence position, blade height adjustment, cutting habits... Once it has found its place in the workshop and still meets your needs, it would be a shame to replace it because of a single worn part.

Over the years, some components naturally experience more wear than others. Motor carbon brushes wear down, switches are operated every time the machine is used, fences and adjustment mechanisms can develop play, and components around the blade may become damaged during handling.

Accurately identifying the cause of the problem before ordering can often lead to a straightforward repair and get a machine you already know well back into service.

Parts for Woodstar ST8, ST10E, ST10L, ST10L² and ST10S

The Woodstar and Woodster ST8, ST10E, ST10L, ST10L² and ST10S table saws were sold in different versions. Some parts may also be shared with certain Scheppach, Kity or Dexter table saws.

This compatibility is particularly useful when maintaining a machine several years after purchase. However, care is still required: two models that look very similar may use different components depending on their version or manufacturing period.

Before ordering, always check the exact model, reference, serial number and manufacturing date of your saw whenever this information is available. The list of compatible machines shown on each product page remains the best way to select the correct reference.

Motors, armatures, carbon brushes and switches

The motor is obviously at the heart of the saw. Depending on the model and manufacturing period, different 230 V motors may be available. Certain versions, particularly the ST10S, may have been fitted with different motors depending on their production date, so this point should be checked carefully before purchase.

Motor carbon brushes are standard wear parts. When they become heavily worn, the saw may become difficult to start, operate irregularly or become less reliable. Their condition can be checked before considering more extensive work on the motor.

The armature and switch are also components that can be replaced on certain models. A table saw that no longer starts therefore does not automatically have a failed motor: a methodical diagnosis can help avoid unnecessarily replacing expensive parts.

Always disconnect the machine from the mains before carrying out electrical work. If you are unsure about the diagnosis or repair, have the work carried out by a qualified person.

Rip fence and mitre gauge for accurate adjustments

The rip fence plays an essential role during rip cuts. It must be positioned correctly and remain stable while working. A damaged or distorted fence, or one that is difficult to lock, can make adjustments less convenient and make consistent cuts harder to achieve.

The mitre gauge is used to position the workpiece for crosscuts and angled cuts. Depending on your saw model, different fences, gauges and guiding accessories may be available.

After replacing any guide component, always take the time to check its alignment with the blade. A few minutes spent making the correct adjustments can make the machine much more pleasant to use again.

Table insert, blade guard and flanges

Several parts around the blade can be replaced independently. The table insert, sometimes called a throat plate, surrounds the blade opening in the table. If it is broken, distorted or badly worn, replacing it helps restore the machine to good working condition.

The blade guard is an important component of the machine and should not be overlooked. Some references relate to the outer blade guard, while others concern internal components of the protection system.

The flanges ensure that the blade is held correctly on its arbor. When working in this area, always check that the selected part reference is suitable for your exact saw and follow the manufacturer's intended assembly.

Blade height adjustment and mechanical parts

A table saw includes several mechanisms for adjusting the blade position. A blade height adjustment rod, bevel gear or gear segment may wear, break or develop play after extensive use.

If an adjustment control becomes unusually stiff, turns without effect or no longer holds the required position correctly, it is best to inspect the mechanism rather than force it. A small damaged mechanical component may sometimes be the only cause of the problem.

Replacing the affected component can preserve the rest of the mechanism and avoid a more extensive repair.

Profiles, accessories and additional equipment

Depending on the model, various accessories may be fitted to the table saw, including aluminium profiles, laser guides, crosscut gauges and other guiding components. These parts may become damaged, lost or simply need replacing after several years of use.

Once again, the manufacturing date can be important. A profile or motor intended for a more recent version of a machine may not necessarily be identical to the one fitted to an earlier version.

Do not rely solely on the appearance of the part. Compare the reference and compatibility information before placing your order.

Maintain your table saw to keep it working longer

Regular maintenance helps preserve the performance of your saw. Remove sawdust that has accumulated around the motor, adjustment mechanisms and beneath the table, and regularly check the condition of the power cable, switch, guards and guiding systems.

The blade should also be suitable for the material being cut, correctly installed and replaced when excessively worn. A blade in poor condition places greater strain on the machine and can reduce cutting quality.

When cleaning the saw, take the opportunity to check for unusual play, loose fasteners and the general condition of the components. Spotting wear early can often prevent a more serious failure later.

Give your Woodstar table saw a second life

An older Woodstar ST8 or ST10 that has already cut hundreds of workpieces is not necessarily at the end of its life just because a switch, fence or set of carbon brushes needs replacing. When a machine suits the way you work and you know its settings by heart, repairing it often makes much more sense than replacing everything.

Our selection of spare parts for Woodstar and Woodster table saws helps you find the component suited to your model and extend the working life of your equipment.

Take a few moments to identify your machine accurately before purchasing, particularly when a part reference depends on the manufacturing date. Correct identification from the outset helps prevent ordering mistakes and gets your saw back into service more quickly.