Filter By

Brand

Brand

Price

Price

  • €14.00 - €140.00

Availability

Availability

Spare parts for power feeder Bernardo

Spare parts for power feeder Bernardo - Probois Machinoutils

Active filters

Spare parts for Bernardo woodworking Power Feeder

Discover our selection of spare parts for Bernardo woodworking power feeders, designed for the maintenance, repair and replacement of worn components on automatic feeding systems used with woodworking machines.

A woodworking power feeder is a particularly useful accessory in joinery workshops and woodworking businesses. When installed on a suitable spindle moulder, it provides a controlled and consistent feed rate during machining operations, including moulding, profiling, grooving and repetitive woodworking tasks.

Using motor-driven feed rollers, the power feeder applies pressure to the workpiece and moves it forward at a speed suited to the operation being performed.

Like any mechanical equipment, a Bernardo power feeder contains components that may wear out over time, including feed rollers, rubber-coated wheels, gears, pinions, motor carbon brushes, adjustment handles and electrical components.

At Probois Machinoutils, we offer a selection of replacement parts to help you maintain your power feeder, restore its operation and extend its service life.

What is a woodworking power feeder used for?

An automatic power feeder is designed to control the movement of wood during suitable machining operations on a spindle moulder.

It generally consists of a motor, a transmission system, several feed rollers and an adjustable support that allows the operator to position the feeder correctly in relation to the machine table and workpiece.

Using a power feeder offers several advantages:

  • Consistent workpiece feeding during machining.

  • A feed speed adapted to the operation.

  • More uniform pressure on the wood.

  • Improved repeatability for production runs.

  • Fewer variations associated with manual feeding.

  • Greater operating comfort during compatible woodworking tasks.

A power feeder can also reduce the need to push the workpiece manually close to the cutting tool.

However, it must never be considered a substitute for the machine's guards, fences or other safety devices.

Keeping its mechanical and electrical components in good condition is essential for reliable operation.

What spare parts are available for Bernardo power feeders?

Depending on the feeder model and the availability of individual references, different types of replacement components may be required.

These may include:

  • Power feeder wheels and feed rollers.

  • Rubber tyres and replacement wheel coverings.

  • Transmission pinions and gears.

  • Adjustment handles and levers.

  • Carbon brushes for certain electric motors.

  • Switches and control components.

  • Bearings and mechanical shafts.

  • Fasteners and mounting components.

  • Specific transmission parts.

The dimensions and specifications of each component must be checked before ordering.

Two power feeders may look very similar while using different wheels, gears or internal mechanical parts.

Feed rollers and wheels for woodworking power feeders

Power feeder wheels are among the most important components of an automatic feeding system.

They make direct contact with the wood and move the workpiece forward during machining.

Their outer surface is generally made from a material that provides sufficient grip to transmit the feeding force while maintaining pressure on the workpiece.

Over time, the wheels may wear down, harden, crack or lose their gripping ability.

A worn or damaged feed roller may cause:

  • workpiece slipping;

  • inconsistent feeding;

  • unwanted marks on the wood;

  • reduced feeding efficiency;

  • difficulties when machining long workpieces.

Replacing a worn wheel can help restore smoother and more consistent feeding.

75 mm, 80 mm, 100 mm and 120 mm power feeder wheels

Power feeder wheels are available in different sizes depending on the design and capacity of the equipment.

Common dimensions found in our range include:

  • 75 × 27 mm feed wheels for certain small power feeders.

  • 80 × 30 mm feed wheels for selected feeder models.

  • 100 × 50 mm feed wheels for larger power feeders.

  • 120 × 60 mm feed wheels for certain heavy-duty feeding systems.

These measurements refer to the outside diameter and width of the wheel.

However, the dimensions alone are not enough to confirm compatibility.

The mounting system, bore diameter, hub design and characteristics of the original wheel must also be checked.

Important: a feed wheel with the same diameter is not necessarily compatible with every Bernardo power feeder. Some wheels in this category are designed for specific models or other brands.

Replacement rubber tyres for power feeder wheels

On certain woodworking power feeders, it is possible to replace only the rubber tyre or outer covering of the feed wheel, rather than the complete wheel assembly.

This can be a useful solution when the wheel's central support remains in good condition but the outer rubber surface has become worn or damaged.

The rubber covering plays an essential role in maintaining grip on the workpiece.

A hardened, cracked or smooth tyre may cause slipping and inconsistent feeding.

Before purchasing a replacement rubber covering, check the wheel diameter, width and attachment design.

A rubber tyre designed for a particular wheel or brand should not automatically be considered universal.

Transmission gears and pinions for power feeders

Power feeder gears and pinions transmit movement between the motor and the feed rollers.

Depending on the feeder design, they may also be involved in selecting different feeding speeds.

These components are subjected to repeated mechanical loads during operation.

Over time, a gear may develop worn teeth, excessive play or damage caused by a mechanical blockage.

Several symptoms may indicate a transmission problem:

  • unusual mechanical noise;

  • clicking or knocking inside the gearbox;

  • irregular feeding;

  • feed rollers failing to rotate;

  • difficulty transmitting movement;

  • abnormal vibration.

When replacing a gear or pinion, it is essential to match its shape, number of teeth, dimensions and mounting system.

03D1, 03D2 and 19D-2 pinions for small power feeders

Some small woodworking power feeders use components identified by specific position numbers in their exploded parts diagrams.

References available in our catalogue include pinions identified as 03D1, 03D2 and 19D-2.

These designations help identify the corresponding component in the machine's parts list.

Before ordering, compare the part reference with the position number shown in the exploded diagram for your exact feeder model.

Compatibility must be confirmed for the machine concerned.

Adjustment handles and mechanical parts for power feeders

An automatic power feeder incorporates various adjustment systems to control its position, orientation and the pressure applied to the workpiece.

Adjustment handles, locking levers and clamping components are frequently operated when setting up the machine.

Over time, they may become loose, break or develop worn threads.

A damaged locking handle may prevent the feeder from remaining securely in its intended position.

Replacing the appropriate component helps restore reliable adjustment and clamping.

Certain handles are identified by a specific parts diagram reference, such as the 20D adjustment handle used on some small power feeders.

Always check the corresponding machine model before purchasing.

Carbon brushes for small woodworking power feeders

Certain automatic power feeders are fitted with electric motors that use carbon brushes.

These components provide the electrical contact required for the operation of the relevant motor.

With continued use, carbon brushes gradually wear down.

Excessively worn brushes may cause starting difficulties, intermittent operation or complete motor stoppage.

Our range includes 6 × 6 × 15 mm carbon brushes for certain small woodworking power feeders.

Before replacing them, it is essential to check their dimensions and compatibility with the original motor.

Not all power feeder motors use carbon brushes.

Switches and electrical components for Bernardo power feeders

Automatic power feeders also incorporate electrical components used to start and stop the equipment and, depending on the model, select the direction of rotation or feeding speed.

A damaged switch or defective control component may prevent normal operation.

Before replacing an electrical part, check the feeder's technical specifications, including its supply voltage and control system.

A switch that looks identical to the original may have different connections or electrical ratings.

All electrical work must be carried out with the equipment disconnected from the power supply and by a suitably qualified person.

How to identify the correct Bernardo power feeder spare part

When ordering a spare part for a Bernardo woodworking power feeder, accurate identification of the equipment is essential.

We recommend checking the following information:

  • The feeder brand.

  • The exact model number.

  • The serial number, when available.

  • The manufacturing year or production period.

  • The supply voltage.

  • The component's position number in the exploded parts diagram.

  • The dimensions of the original part.

This information is particularly important for feed wheels, pinions, gears and electrical components.

Visual similarity alone is not sufficient to confirm compatibility.

Using exploded parts diagrams to identify replacement parts

A Bernardo power feeder exploded parts diagram is a valuable resource when identifying replacement components.

It shows the different assemblies and generally provides position numbers for individual parts.

These numbers make it easier to identify the component required.

When looking for a gear, adjustment handle, shaft or internal mechanical part, consult the parts diagram corresponding to your exact feeder model.

This helps reduce ordering mistakes and makes repairs easier.

For older power feeders, the diagram may also help distinguish between different production versions.

Why is my woodworking power feeder not feeding properly?

Inconsistent feeding does not necessarily mean that the motor is defective.

Several issues may cause reduced feeding performance:

  • Worn or dirty feed wheels that no longer grip the wood correctly.

  • Insufficient roller pressure on the workpiece.

  • Incorrect feeder positioning.

  • Damaged gears or pinions.

  • Transmission problems.

  • Defective electrical components.

  • A feed speed unsuitable for the machining operation.

Before replacing an expensive component, it is advisable to identify the actual cause of the problem.

In some cases, worn feed wheels may explain inconsistent feeding even though the motor and transmission are working correctly.

Regular maintenance of Bernardo power feeders

Regular maintenance helps prevent premature component wear and maintain consistent feeding performance.

Periodically inspect the condition of the feed wheels and remove resin, dust and sawdust deposits that may reduce their grip.

Also check the adjustment handles, locking mechanisms and mounting components.

Transmission systems should be maintained in accordance with the manufacturer's instructions, using the recommended lubricants and maintenance intervals.

If unusual noise or excessive vibration occurs, stop the equipment and investigate the cause before continuing to work.

Why repair a Bernardo woodworking power feeder?

An automatic power feeder represents a useful investment for repetitive woodworking operations.

When a problem is caused by a replaceable feed wheel, gear, handle or electrical component, replacing the complete feeder may not be necessary.

A suitable repair can extend the equipment's service life and allow you to continue using a feeding system adapted to your spindle moulder.

Replacing worn components also helps maintain more consistent feeding and satisfactory mechanical operation.

Probois Machinoutils: your Bernardo power feeder spare parts supplier

At Probois Machinoutils, we offer a selection of spare parts for Bernardo woodworking power feeders and other compatible feeding systems to make maintenance and repairs easier.

Our catalogue includes feed wheels in different sizes, replacement rubber tyres, pinions, adjustment handles and selected electrical components.

The available range evolves according to manufacturer references and spare part availability.

Choosing the correct replacement part can help extend the service life of your woodworking power feeder and maintain reliable operation in your workshop.

IMPORTANT: BEFORE PURCHASING, always check the list of compatible machines provided on each product page. Some parts in this category may also be intended for power feeders from other brands. Always verify the exact model, component dimensions, exploded diagram reference and, where necessary, the manufacturing year before ordering a replacement part for your Bernardo power feeder.