M8x10 MM blade locking screw with hexagon head and 12 mm wrench for Holzmann and Bernardo thicknesser, planer and woodworking combination
704 mm Chain for Holzmann and Bernardo Jointed Planer and Combination Wood as listed below
608 mm chain for Holzmann and Bernardo planer and jointer as listed below
Motor 230V for the planer thicknesser Bernardo ADH250 and Holzmann HOB260ECO
Trapezoidal belt for jointer, planer and woodworking combination according to the list below
Exit roller for planer jointer Holzmann HOB260ECO and Bernardo ADH250P
Suction housing outlet for the planer thicknesser Bernardo ADH250 and Holzmann HOB260ECO
Cover plate for Bernardo ADH250 and CWM250R thicknesser planer
Hinge part no. 15 compatible with several Bernardo and Holzmann planer thicknessers. Ideal replacement spare part.
Replacement pressing roller (Ref. No. 82 or No. 313) compatible with ADM260, AD260S, ADH250P and CWM260F. Ensures uniform pressure, excellent wear resistance, and quick installation for optimal machine performance.
Replacement bush (sleeve) ref. No. 573 and No. 311 compatible with ADM260, AD260S, ADH250P, PT310 and FS310PS. Durable part ensuring precise guidance, reduced friction, and long service life.
Replacement feed roller (Ref. No. 81 or No. 314) compatible with ADM260, AD260S, ADH250P and CWM260F. Ensures uniform pressure, excellent wear resistance, and quick installation for optimal machine performance.
Compression spring Ø17 x 54 mm, wire Ø3 mm, compatible with several Bernardo, Holzprofi and Jean l'Ébéniste planer thicknessers. Part No. 84 on ADM/PT models and Item No. 325 on FS310P and FS310PS models.
Replacement drive pulley for Holzmann HOB260ECO and Bernardo ADH250 planer thicknessers. Spare part designed for the machine's drive system.
The Bernardo ADH250 planer thicknesser is a woodworking machine designed for surface planing and thicknessing operations. It allows woodworkers to flatten timber faces, straighten edges and produce workpieces with a consistent thickness for joinery and cabinetmaking projects.
Over time, certain mechanical and electrical components may wear out or require replacement. A damaged drive belt, worn feed roller, faulty motor or damaged chain can interfere with machine operation and reduce the quality of the finished work.
At Probois Machinoutils, we offer a selection of spare parts for the Bernardo ADH250 planer thicknesser to help you maintain your equipment, replace defective components and extend its service life.
This category includes a SJD 1080 mm V-belt, a 230 V motor, a 25 µF capacitor, transmission chains, infeed and outfeed rollers, a pulley, planer knife clamping screws, a chip collector outlet, a cutterblock guard and various mechanical components.
Certain references are also offered for the Bernardo ADH250P, Holzmann HOB260ECO and other compatible machines. It is essential to check the compatibility information provided for each individual product before ordering.
The SJD 1080 mm V-belt helps transmit movement between the mechanical components specified for compatible machines.
A belt in good condition ensures smooth power transmission and helps prevent power loss caused by slipping.
Over time, it may develop various signs of wear:
Cracks on its surface.
Deformation of its profile.
Significant wear on its sides.
Unusual noises during operation.
Slipping or irregular power transmission.
A damaged belt must be replaced with a reference matching the specifications of the original installation.
The SJD 1080 mm designation should be checked against the existing belt and the information provided on the product page.
It is also advisable to inspect the condition and alignment of the pulleys, as mechanical problems can cause premature wear of the replacement belt.
The Bernardo ADH250 electric motor provides the power required to drive the planer thicknesser's mechanisms.
Our catalogue includes a 230 V replacement motor, offered particularly for the following machines:
Bernardo ADH250.
Holzmann HOB260ECO.
Motor replacement may be necessary following a confirmed electrical or mechanical failure.
However, a machine that no longer starts or appears to lack power does not necessarily have a defective motor.
Before replacing this component, we recommend checking the electrical supply, capacitor, control devices, transmission system and possible mechanical obstructions.
An excessive depth of cut, blunt planer knives or a slipping belt may also cause difficulties during operation.
A replacement motor must match the electrical and mechanical specifications of the machine.
The 25 µF 450 V run capacitor is an electrical component used in certain single-phase motors.
It contributes to motor operation according to the design of the electrical circuit.
Our selection includes a 25 µF 450 V wired run capacitor for compatible applications.
A defective capacitor may cause:
Difficulty starting the motor.
A motor that hums but fails to rotate.
Irregular operation.
Reduced torque.
Abnormal motor overheating.
However, these symptoms can have several causes. It is therefore important to confirm the diagnosis before replacing the capacitor.
To select the correct part, check the 25 µF capacitance, 450 V rated voltage, capacitor type, dimensions and electrical connections.
Warning: a capacitor can retain an electrical charge even after the power supply has been disconnected. All work must be carried out by a competent person using appropriate safety procedures.
The transmission chains for planer thicknessers contribute to the operation of the drive and synchronisation mechanisms fitted to compatible machines.
We offer two references in particular:
704 mm transmission chain.
608 mm transmission chain.
These chains are offered for selected Bernardo and Holzmann machines, depending on the reference and installation.
A worn, loose or damaged chain may cause mechanical noises, jerky movement or irregular operation of the affected mechanism.
Before replacing a chain, inspect its condition, the sprockets and any tensioning devices.
It is important not to confuse the two available lengths.
Compatibility must be confirmed using the exact machine model and the specifications of the original chain.
The feed roller plays an important role during thicknessing operations.
It helps move timber through the machine and ensures consistent feeding.
We offer a replacement feed roller, corresponding to position 81 or 314 depending on the machine.
This part is offered particularly for:
Bernardo ADM260.
Bernardo AD260S.
Bernardo ADH250P.
Bernardo CWM260F.
A worn or damaged feed roller may cause feeding difficulties, jerky movement or insufficient timber traction.
However, feeding problems do not always originate from the roller itself.
They may also be related to a chain, sprocket, incorrect adjustment, excessive depth of cut or dirt accumulation within the mechanisms.
Before ordering, check your machine model and the corresponding position number in its exploded parts diagram.
The outfeed roller helps move timber after it has passed beneath the cutterblock during thicknessing.
It contributes to the smooth exit of the workpiece.
We offer a replacement outfeed roller intended particularly for:
Bernardo ADH250P.
Holzmann HOB260ECO.
A damaged roller may cause irregular feeding or unwanted marks on the timber.
We recommend checking its surface condition, rotation and mounting before considering replacement.
The outfeed roller and feed roller perform complementary functions but should not be confused.
Their specifications and positions must be checked against the machine's technical documentation.
The pressure roller helps hold and guide timber as it passes through the thicknessing mechanism.
We offer a replacement pressure roller, corresponding to position 82 or 313 depending on the model.
It is offered particularly for:
Bernardo ADM260.
Bernardo AD260S.
Bernardo ADH250P.
Bernardo CWM260F.
A damaged or incorrectly positioned pressure roller may interfere with timber movement and the consistency of the finished work.
It is also important to inspect the springs, supports and other components associated with the mechanism.
Incorrect pressure may sometimes result from poor adjustment or another defective mechanical component.
The drive pulley is an essential component of the mechanical transmission system.
It transfers movement to the relevant mechanism through the system specified by the manufacturer.
Our catalogue includes a replacement drive pulley offered for:
Bernardo ADH250.
Holzmann HOB260ECO.
A damaged pulley may cause premature belt wear, vibrations, unusual noises or irregular power transmission.
During diagnosis, we recommend checking pulley alignment, mounting and the condition of the belt.
Before ordering, verify the dimensions, bore diameter and specifications of the original pulley.
The planer knife clamping screws are essential for securing the knife clamping components on the cutterblock.
We offer M8 x 10 mm hex-head screws, for a 12 mm spanner, intended for selected Bernardo and Holzmann planer thicknessers and combination woodworking machines.
These screws help secure the knives according to the design of the cutterblock assembly.
A screw with damaged threads, a deformed head or insufficient clamping ability must be replaced with a suitable reference.
Correct planer knife clamping is an essential safety requirement.
The manufacturer's instructions must be followed, and screws with unsuitable dimensions or specifications must never be used.
After any work on the cutterblock, all fixing components must be checked before the machine is returned to service.
The cutterblock guard helps restrict access to the dangerous section of the cutterblock during surface planing operations.
Our catalogue includes a replacement cutterblock guard, offered for:
Bernardo ADH250.
Bernardo CWM250R.
This component is an important part of operator safety.
A broken, bent or incorrectly positioned guard must be repaired or replaced.
It is essential to retain the protective devices specified by the manufacturer and adjust them correctly according to the timber being worked.
A planer thicknesser must never be operated with a missing, damaged or disabled guard.
The chip collector outlet contributes to the removal of wood shavings produced during surface planing and thicknessing.
We offer a replacement chip collector outlet compatible particularly with:
Bernardo ADH250.
Holzmann HOB260ECO.
A cracked, broken or incorrectly positioned collector may interfere with chip removal.
Poor chip extraction can cause wood shavings to accumulate in certain areas of the machine.
It is therefore important to regularly inspect the condition of the ducts, connections and extraction system.
A suitable wood chip extractor helps maintain a cleaner working environment and reduces chip accumulation during machining.
Certain planer thicknessers have hinged tables or movable components that allow the operator to switch between operations or access internal mechanisms.
We offer a replacement hinge corresponding to position 15, intended for several compatible Bernardo and Holzmann planer thicknessers.
A damaged hinge may cause incorrect positioning of the supported component or make its movement difficult.
Before replacing this part, check the fixings and inspect the associated components for deformation.
Compatibility must be confirmed using the exploded parts diagram of the relevant machine.
Mechanical bushes and sleeves may provide guidance, support or reduced friction between moving components.
Our catalogue includes a replacement bush corresponding to positions 573 and 311, depending on the machine.
It is offered particularly for:
Bernardo ADM260.
Bernardo AD260S.
Bernardo ADH250P.
Bernardo PT310.
Bernardo FS310PS.
A worn bush may cause excessive play, mechanical noises or reduced precision in the affected mechanism.
Before ordering, we recommend checking the part position number, dimensions and location on the machine.
Compression springs are used in various mechanisms to apply pressure or return a moving component to its original position.
We offer a compression spring with a diameter of 17 mm and a length of 54 mm, featuring a 3 mm wire diameter.
This part corresponds particularly to position 84 on certain ADM/PT machines and position 325 on FS310P and FS310PS models.
A broken, deformed or weakened spring may interfere with the operation of its mechanism.
Before replacing a spring, it is essential to check its dimensions and installation position.
The other associated components should also be inspected to identify the cause of the problem.
Certain Bernardo ADH250 spare parts are also offered for planer thicknessers of similar design.
Several references in this category are intended for the Holzmann HOB260ECO, including the 230 V motor, drive pulley, chip collector outlet and selected rollers depending on the machine version.
Other components are intended for the Bernardo ADH250P, including certain rollers, bushes and mechanical parts.
Compatibility may also exist with Bernardo ADM260, AD260S, PT310, FS310PS and CWM260F models, depending on the reference.
However, a spare part compatible with the Bernardo ADH250 is not necessarily compatible with the Bernardo ADH250P or every version of the Holzmann HOB260ECO.
Mechanical and electrical specifications may vary depending on the machine and its year of manufacture.
It is therefore essential to check the information provided on each product page.
Regular maintenance helps preserve the performance of your Bernardo ADH250 planer thicknesser and reduces the risk of breakdowns.
We recommend the following checks:
Inspect the drive belt for cracks, deformation or signs of slipping.
Check the chains and sprockets for abnormal wear or transmission problems.
Clean the working tables regularly to remove wood shavings and resin deposits.
Maintain the planer knives, sharpening or replacing them when necessary.
Inspect the infeed and outfeed rollers to ensure consistent timber feeding.
Check the pulleys and their fixings to reduce vibrations and belt wear.
Inspect all protective devices before each use.
Keep the extraction ducts clear to ensure efficient chip removal.
Adjust the depth of cut according to the width and hardness of the timber.
A lack of power may be caused by a worn belt, blunt planer knives or an excessive depth of cut.
Similarly, feeding problems may originate from a chain, roller or incorrect adjustment.
It is therefore preferable to diagnose the problem before ordering replacement parts.
All maintenance and repair work must be carried out with the machine switched off and completely disconnected from the electrical supply.
When ordering a spare part for the Bernardo ADH250, we recommend identifying your machine precisely.
In particular, check whether it is a Bernardo ADH250 or ADH250P, as certain components may differ between versions.
Then consult your machine's exploded parts diagram to identify the position number of the required component.
For drive belts, check the dimensions and markings.
For chains, verify the length and specifications of the original installation.
For motors and capacitors, compare the electrical specifications.
For rollers, pulleys, bushes and other mechanical components, check their dimensions and references.
These precautions help reduce ordering errors and ensure that you select a suitable component for your equipment.
At Probois Machinoutils, we offer a range of drive belts and spare parts for the Bernardo ADH250 planer thicknesser, helping you maintain and repair your woodworking machine.
Our selection includes a SJD 1080 mm V-belt, a 230 V motor, a 25 µF 450 V run capacitor, 704 mm and 608 mm transmission chains, infeed and outfeed rollers, a drive pulley, planer knife clamping screws, a cutterblock guard, a chip collector outlet, a hinge, a mechanical bush and a compression spring.
Certain references are also offered for Bernardo ADH250P, ADM260, AD260S and Holzmann HOB260ECO machines, depending on the component concerned.
Our catalogue is regularly updated according to product availability and customer requirements.
If you are looking for a part that is not currently listed in this category, please contact us with the exact model of your machine and, whenever possible, the part position number shown in its exploded parts diagram.
Discover our selection of Bernardo ADH250 spare parts to repair your planer thicknesser, replace worn components and extend the service life of your woodworking machine.
