Filter By

Brand

Brand

Price

Price

  • €9.00 - €50.00

Availability

Availability

Spare parts for Bernardo spindle moulder

Spare parts for Bernardo spindle moulder - Probois Machinoutils

Active filters

Interchangeable spindle moulder shaft

49,99 € Tax included

Interchangeable shaft mark 65 for router tools to be mounted on Holzmann FS160L router, Bernardo T500PF and Jean l'ébéniste MX5108

Bernardo Spindle Moulder Spare Parts – Maintain and Repair Your Woodworking Machine

Are you looking for Bernardo spindle moulder spare parts to replace a worn drive belt, a spindle shaft or another component required for the proper operation of your machine?

At Probois Machinoutils, we offer a selection of replacement parts for Bernardo spindle moulders, designed to make maintenance, repairs and the replacement of mechanical components easier.

Bernardo spindle moulders are used in woodworking and cabinetmaking workshops for various machining operations, including grooving, profiling, moulding, rebating and producing woodworking joints.

Their operation relies on several essential components, including the motor, transmission system, tool spindle, clamping devices and adjustment mechanisms.

Over time and with regular use, some components may wear out, become damaged or require replacement.

Our catalogue includes drive belts, interchangeable spindle shafts and router bit collets, mainly designed for the Bernardo T500PF spindle moulder.

Spare Parts for the Bernardo T500PF Spindle Moulder

The Bernardo T500PF is a woodworking spindle moulder equipped with an interchangeable spindle system that allows different types of compatible cutting tools to be fitted.

This system makes it possible to switch between a spindle designed for spindle moulder tooling and another spindle designed to accept collets for router bits.

For this model, we offer several replacement parts and components:

  • 508J5 Poly-V drive belt, subject to the stated compatibility.

  • Interchangeable spindle, item 65, designed for spindle moulder tooling.

  • Interchangeable spindle, item 66, designed for fitting router bit collets.

  • 8 mm router bit collet.

  • 10 mm router bit collet.

  • 12 mm router bit collet.

These parts allow you to maintain the transmission system or replace components of the tool-holding assembly.

Before ordering, always check the exact model of your Bernardo spindle moulder and the compatibility of the required component.

508J5 Poly-V Drive Belt for Bernardo Spindle Moulders

The 508J5 Poly-V drive belt is a transmission belt used on several woodworking spindle moulder models.

It helps transfer movement from the motor to the machine's drive system.

This belt is listed for certain machines from Bernardo, Holzmann, Jean l'ébéniste, Kity and Scheppach, depending on the models specified on its product page.

A drive belt in good condition helps ensure:

  • Smooth power transmission.

  • Efficient spindle drive.

  • Reduced risk of belt slipping.

  • More stable mechanical operation.

  • Consistent machine performance.

Over time, a drive belt may stretch, crack or show signs of wear.

A damaged belt can cause unusual noises, drive problems or loss of power transmission.

When replacing the belt, it is essential to use the correct 508J5 reference and verify compatibility with your machine.

Interchangeable Spindle, Item 65, for Spindle Moulder Tooling

The interchangeable spindle, item 65, is designed for mounting spindle moulder cutting tools on certain machines equipped with a removable spindle system.

This component is listed for the following models:

  • Bernardo T500PF

  • Holzmann FS160L

  • Jean l'ébéniste MX5108

The spindle is an essential component of the tool-holding system.

It supports cutting tools compatible with the machine's configuration and transmits the rotational movement required for machining operations.

A damaged spindle, an insecure mounting system or abnormal wear may compromise the correct holding of cutting tools.

It is therefore important to inspect its condition regularly, along with the associated clamping components.

An interchangeable spindle must always match the mounting system specified by the manufacturer.

Interchangeable Spindle, Item 66, for Router Bit Collets

The interchangeable spindle, item 66, is designed to accept collets for mounting compatible router bits on certain woodworking spindle moulders.

It is listed for:

  • Bernardo T500PF

  • Holzmann FS160L

  • Jean l'ébéniste MX5108

This spindle provides the mounting system required for fitting suitable collets.

It allows router bits to be installed when their shank diameter matches the collet being used.

It is important to distinguish between the two spindle types:

  • Item 65: interchangeable spindle designed for spindle moulder tooling.

  • Item 66: interchangeable spindle designed for router bit collets.

These two components perform different functions and must not be confused.

Using router bits requires a suitable spindle and collet, as well as compliance with the operating limits of both the machine and the cutting tool.

8 mm, 10 mm and 12 mm Router Bit Collets

Router bit collets for spindle moulders with interchangeable spindles are designed to securely hold router bits by their shanks.

Our catalogue includes three sizes:

  • 8 mm collet: for router bits with an 8 mm shank.

  • 10 mm collet: for router bits with a 10 mm shank.

  • 12 mm collet: for router bits with a 12 mm shank.

These collets are intended for compatible machines equipped with the corresponding interchangeable spindle system.

Choosing the correct diameter is essential to ensure secure tool clamping.

A 12 mm collet must never be used to hold a router bit with a 10 mm or 8 mm shank.

Likewise, a damaged, deformed or excessively worn collet must not be used.

Before each use, check that the collet is clean, the router bit shank is in good condition and the entire assembly is properly tightened.

Compatibility of Bernardo Parts with Holzmann and Jean l'ébéniste Spindle Moulders

Certain Bernardo spindle moulder spare parts are also compatible with machines sold under other brand names.

This is particularly true of the interchangeable spindles designed for:

  • Bernardo T500PF

  • Holzmann FS160L

  • Jean l'ébéniste MX5108

Drive belts may also be shared by several spindle moulder models, including certain machines from Kity, Scheppach, Holzmann and Jean l'ébéniste.

This compatibility can make it easier to repair machines from different brands that use identical components.

However, this does not mean that all parts from these machines are interchangeable.

Dimensions, mounting systems and manufacturing versions may differ.

It is therefore essential to check the compatibility information on each product page before ordering.

When Should You Replace a Drive Belt or Spindle on a Bernardo Spindle Moulder?

Certain symptoms may indicate that a component of your Bernardo spindle moulder requires inspection or replacement.

Common warning signs include:

  • The machine produces unusual noises during operation.

  • The tool spindle no longer rotates correctly.

  • The drive belt shows cracks or significant wear.

  • The transmission slips or becomes irregular.

  • An interchangeable spindle has excessive play.

  • The spindle mounting system is damaged.

  • A collet no longer holds the router bit securely.

  • Unusual vibrations occur during machining.

These symptoms do not always identify the faulty component directly.

Vibration may also be caused by an unbalanced cutting tool, incorrect tightening, a worn bearing or improper assembly.

It is therefore advisable to carry out a diagnosis before replacing a part.

Always disconnect the spindle moulder from the electrical supply and wait until the spindle has come to a complete stop before carrying out any maintenance or repair work.

How to Identify the Correct Spare Part for Your Bernardo Spindle Moulder

Before ordering a Bernardo spindle moulder spare part, several checks are recommended.

1. Check the exact machine model

Consult the machine's identification plate to confirm its model reference, particularly the Bernardo T500PF.

2. Identify the required component

Determine whether you need a drive belt, interchangeable spindle, collet or another mechanical component.

3. Consult the exploded parts diagram

The exploded diagram allows you to identify components and their corresponding item numbers.

For the Bernardo T500PF, the interchangeable spindles are identified as items 65 and 66.

4. Check the technical specifications

Verify dimensions, diameters, references and mounting systems.

For a collet, always check the router bit shank diameter.

5. Contact us if you are unsure

If you cannot find the required component, please provide the exact model of your spindle moulder, its serial number and the part number shown on the exploded diagram.

This information will help us review your request more efficiently.

How to Maintain Your Bernardo Spindle Moulder and Extend Its Service Life

Regular maintenance helps preserve the performance and accuracy of your Bernardo woodworking spindle moulder.

Recommended maintenance practices include:

  • Regularly remove accumulated wood chips and dust from the machine.

  • Check the condition of the drive belt.

  • Inspect the operation of the tool spindle.

  • Check the secure mounting and clamping of interchangeable spindles.

  • Clean collets and their corresponding mounting surfaces.

  • Inspect cutting tools before each use.

  • Check the tightness of screws and fastening components.

  • Keep the tables clean and maintain sliding surfaces.

  • Use a suitable dust extraction system.

  • Observe the permitted rotational speeds of the cutting tools.

  • Check that fences, guards and safety devices operate correctly.

  • Watch for unusual vibrations or noises.

A properly maintained spindle moulder helps reduce breakdowns and premature component wear.

Never operate the machine with a spindle, collet or clamping device that has a defect capable of compromising secure tool retention.

Why Buy Bernardo Spindle Moulder Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we understand that a breakdown can quickly put an essential woodworking machine out of service.

That is why we are continuously developing our range of Bernardo spindle moulder spare parts to make maintenance and repairs easier.

By choosing Probois Machinoutils, you benefit from:

  • A dedicated category for Bernardo spindle moulder replacement parts.

  • Components designed particularly for the Bernardo T500PF.

  • Poly-V drive belts for the transmission system.

  • Interchangeable spindle shafts, items 65 and 66.

  • 8 mm, 10 mm and 12 mm router bit collets.

  • Parts also compatible with certain Holzmann and Jean l'ébéniste machines.

  • A regularly expanding selection of spare parts.

  • Assistance with identifying components suitable for your machine.

Looking for a part that is not yet listed in our catalogue?

Please provide the exact model of your Bernardo spindle moulder and the corresponding item number from the exploded parts diagram. We can review your request and check possible sourcing options.

Discover our selection of spare parts for the Bernardo T500PF spindle moulder and extend the service life of your machine with suitable replacement components.