Abrasive belt 1220x150 mm grit 60 in a professional quality antistatic for edge sanding machines as Holzmann BT1220, Bernardo BDSM230...
Abrasive belt 1220x150 mm grit 80 in a professional quality antistatic for edge sanding machines as Holzmann BT1220, Bernardo BDSM230...
Abrasive belt 1220x150 mm grit 120 in a professional quality antistatic for edge sanding machines as Holzmann BT1220, Bernardo BDSM230...
Abrasive belt 1220x150 mm grit 180 in a professional quality antistatic for edge sanding machines as Holzmann BT1220, Bernardo BDSM230...
Hook and Loop disc diameter 230 mm grit 120 for sander polishers, orbital sander
Hook and Loop disc diameter 230 mm grit 80 for sander polishers, orbital sander
Hook and Loop disc diameter 225 mm grit 80 for sander polishers, orbital sander
Hook and Loop disc diameter 230 mm grit 120 for sander polishers, orbital sander
Special wire capacitor for machine start-up, power 100µf, 275VAC
Motor pulley n° 14 for Holzmann BT1220TOP belt and disc sander
Tension roller for belt and disc sander
Drive roller for belt and disc sander
Driven pulley n° 44 for Holzmann BT1220TOP belt and disc sander
Holzmann is a well-known brand in the woodworking and metalworking machinery sector. Recognised for the robustness and quality of its equipment, it offers machines for professionals, craftsmen and demanding DIY users. Its extensive range includes many stationary woodworking machines, including belt and disc sanders designed for regular workshop use.
The Holzmann BT1220TOP is a stationary sander combining a 1219 x 150 mm sanding belt with a Ø254 mm sanding disc. It features a belt speed of 8 m/s, an adjustable sanding unit and a tilting work table.
This category includes spare parts for the Holzmann BT1220TOP belt and disc sander, helping you maintain, repair and extend the service life of your machine.
A belt and disc sander contains various mechanical and electrical components that can naturally wear over time and with regular use.
A drive belt may stretch or deteriorate, a bearing may develop excessive play, a switch may become faulty or a mechanical component may become damaged.
Replacing the affected component can often restore the machine to proper working condition without having to replace the complete sander.
Our range of Holzmann BT1220TOP spare parts is regularly expanded to provide progressively more solutions for maintaining and repairing this machine.
The Holzmann BT1220TOP combines two sanding systems in a single machine: an abrasive sanding belt and a sanding disc.
Both functions rely on various mechanical components that must remain in good condition to ensure smooth and accurate operation.
Depending on the references available, you may find various spare parts including:
drive belts;
bearings;
drive wheels;
shafts;
springs;
tension levers;
brackets;
guide components;
switches;
electrical components;
adjustment parts;
mechanical components.
Our range is progressively expanded according to the spare parts available for this machine.
The drive belt plays an essential role in the operation of the sander.
The BT1220TOP notably uses an A600 V-belt in its drive mechanism.
Over time, a belt can stretch, crack, lose its grip or eventually break. A damaged belt can cause unusual noises, irregular operation or poor power transmission.
Replacing the belt can restore correct drive operation when the belt is identified as the cause of the problem.
It is important to distinguish between the drive belt and the abrasive sanding belt.
The A600 drive belt is a mechanical component located within the machine's drive system.
The 1219 x 150 mm sanding belt, on the other hand, is the abrasive consumable used directly for sanding wood.
These two components therefore have completely different functions and replacement intervals.
Bearings allow the various shafts and rotating components to operate smoothly with minimal friction and play.
The BT1220TOP notably uses 6202 ball bearings within its mechanical assembly.
With regular use, a bearing may gradually wear, become noisy or develop excessive play.
Abnormal vibrations, unusual mechanical noises or irregular rotation may indicate that a bearing or another mechanical component should be inspected.
Other components such as shafts, drive wheels, springs, brackets or tensioning mechanisms may also need to be replaced during the service life of the machine.
For correct operation, the abrasive belt must be properly tensioned and aligned.
The Holzmann BT1220TOP uses several components involved in belt tensioning and positioning, including a tension lever, springs, shaft, adjustment elements and guide components.
A damaged component within this mechanism may cause poor belt tension, adjustment difficulties or irregular operation.
It is therefore important to accurately identify the faulty component before replacing it.
Electrical parts may also require replacement during the service life of the machine.
A Holzmann BT1220TOP switch, cable, motor or another electrical component may develop a fault after prolonged use.
Before replacing an electrical part, it is important to determine the exact cause of the fault and compare the specifications of the original component.
Any work on electrical components must be carried out with the machine disconnected from the power supply and, where necessary, by a suitably qualified person.
Regular maintenance helps preserve the performance and extend the service life of your Holzmann BT1220TOP belt and disc sander.
Sanding produces a significant amount of wood dust that can accumulate around mechanical components, guide systems and drive components.
It is therefore advisable to clean the machine regularly and inspect the condition of its various mechanisms.
Particular attention should be paid to sanding belt tension and tracking, bearings, drive wheels, springs and the different adjustment systems.
Unusual vibrations, abnormal noises, reduced performance or difficulty keeping the sanding belt correctly positioned may indicate a worn component.
A fault does not necessarily mean that the complete sander needs to be replaced.
Many components of the Holzmann BT1220TOP can be replaced individually.
Replacing a drive belt, bearing, switch, spring or tensioning component can restore the machine to working condition and significantly extend its service life.
The availability of Holzmann BT1220TOP spare parts therefore makes it possible to maintain and repair your machine rather than replacing it at the first sign of a fault.
Before ordering, it is essential to accurately identify the part you need.
The exploded parts diagram for the Holzmann BT1220TOP includes item numbers that identify the various components of the machine.
Locate the item number corresponding to the required part and compare it with the number shown on our product page.
We also recommend checking the information on your sander's identification plate.
Depending on the production period, some components may have changed or may have different specifications.
The Holzmann BT1220TOP should not be confused with the Holzmann BT1220.
They are two different models.
The BT1220TOP notably uses a 1219 x 150 mm sanding belt operating at 8 m/s and a Ø254 mm sanding disc, whereas the BT1220 uses a 1220 x 150 mm belt operating at 5.5 m/s and a Ø228 mm sanding disc.
Their design and some of their spare parts are therefore different.
A BT1220 spare part is not automatically compatible with a BT1220TOP, even when the components appear visually similar.
IMPORTANT: BEFORE PURCHASING, always check that your machine is included in the list of compatible machines provided on the spare part product page.
A component that looks identical to the one installed on your sander is not necessarily compatible.
Dimensions, mounting points, electrical specifications and mechanical characteristics may vary depending on the model and production period.
When this information is specified on the product page, also check the month and year of manufacture and the serial number of your machine.
This precaution is particularly important to avoid confusion between the Holzmann BT1220 and BT1220TOP.
Our range of Holzmann BT1220TOP spare parts is regularly expanded with new references.
Our aim is to progressively offer the main components required to maintain and repair this sander: drive belts, bearings, springs, tensioning parts, drive components, switches, electrical parts and other mechanical components.
If the part you need is not yet available in our catalogue, locate, whenever possible, its item number on the BT1220TOP exploded parts diagram.
This information makes it considerably easier to identify and find the correct replacement component.
Maintaining and repairing your machine can help keep your sander performing correctly for many years.
With our range of spare parts for the Holzmann BT1220TOP sander, you can replace worn or damaged components and keep your machine in good working condition.
Whether you need a drive belt, bearing, tensioning component, switch or another mechanical part, our catalogue is regularly expanded to provide more solutions for maintaining and repairing your Holzmann BT1220TOP belt and disc sander.
