The Scheppach MP150-46, MP150-46E and MP150-46E SE petrol lawn mowers are designed for regular maintenance of lawns and green spaces. With their 46 cm cutting width, these machines offer a good balance between mowing efficiency and manoeuvrability. Several versions have been produced over the years, which means that some replacement parts may vary depending on the manufacturing date and serial number of the lawn mower.

Like any petrol lawn mower, the MP150-46 range contains numerous mechanical components and wear parts that may need to be replaced after several seasons of use. Blades, blade holders, wheels, air filters, recoil starters, ignition components and engine parts can be replaced individually, helping to extend the service life of the machine.

In this category, you will find our selection of replacement parts for Scheppach MP150-46, MP150-46E and MP150-46E SE lawn mowers, allowing you to maintain and repair your equipment.

A wide selection of replacement parts for Scheppach MP150-46

Depending on the version and manufacturing date of your lawn mower, various replacement parts may be available:

• 460 mm lawn mower blade.

• Blade holder.

• Blade fixing bolt.

• Front wheels.

• Air filter.

• Complete air filter assembly.

• Air filter cover.

• Recoil starter.

• Spark plug.

• Ignition coil.

• Flywheel.

• Fuel tank.

• Fuel tank cap.

• Control cables.

• Springs.

• Piston rings.

• Oil dipstick.

• Exhaust.

• Exhaust gasket.

• Engine cover.

• Grass collector components.

• Screws and fixing components.

• Other mechanical parts for Scheppach lawn mowers.

This selection allows you to work on the main systems of the machine: cutting system, engine, starting system, ignition, fuel supply, wheels, controls and grass collection system.

460 mm blade for Scheppach MP150-46 lawn mower

The blade is one of the main wear parts of a lawn mower. With its 46 cm cutting width, the MP150-46 requires a blade that matches the dimensions and mounting system of the machine.

A blade can gradually become blunt or damaged after hitting:

• A stone.

• A root.

• A branch.

• A kerb or border.

• An object hidden in the grass.

A worn or bent blade can cause poor cutting performance, tear the grass instead of cutting it cleanly and generate abnormal vibrations.

For certain versions of the MP150-46, a 460 mm blade is available. However, it is essential to check the part number and manufacturing date of your machine before ordering.

Blade holder and fixing bolt

The blade holder connects the engine shaft to the blade. It is a particularly important component for the correct operation and balance of the cutting system.

After a significant impact with an obstacle, we recommend checking:

• The blade.

• The blade holder.

• The fixing bolt.

• The engine shaft.

• Whether there are any abnormal vibrations.

A damaged or bent blade holder should not be ignored. This component may need to be replaced following an impact that has also damaged the blade.

Air filter and intake parts

The air filter protects the engine against dust, particles and other impurities present in the working environment.

As a lawn mower constantly operates in contact with grass clippings and dust, the filter should be checked regularly.

A heavily clogged filter can restrict airflow to the engine and cause:

• Reduced performance.

• Irregular engine operation.

• Difficulty reaching the correct engine speed.

• Abnormal fuel consumption.

Different filter and air filter assembly versions may exist for the MP150-46 range. Some changes are linked to different production periods. It is therefore important to compare the part number with the exploded parts diagram corresponding to your machine.

Recoil starter, spark plug and ignition coil

The starting and ignition systems also contain several components that may require replacement.

The recoil starter is used every time the engine is started. Over time, the starter rope, return spring or internal mechanism may become worn.

If the lawn mower becomes difficult to start, it may also be necessary to check:

• Spark plug.

• Ignition coil.

• Flywheel.

• Fuel supply.

• General condition of the starting system.

A starting problem does not necessarily mean that the recoil starter is faulty. It is advisable to identify the exact cause of the problem before ordering a replacement part.

Fuel tank, fuel cap and fuel supply

The fuel supply system must remain in good condition to ensure correct engine operation.

Depending on the version, several components can be replaced separately, including the fuel tank and fuel tank cap.

A cracked fuel tank, damaged cap or fuel leak should be dealt with promptly. Any work on the fuel system must be carried out with the engine switched off and cold, away from any source of ignition.

Engine parts for Scheppach MP150-46

Some repairs may require more extensive work on the engine. Components such as piston rings, oil dipstick, exhaust, exhaust gasket, engine cover, ignition coil or flywheel may be available depending on the version of the machine.

These parts allow only the faulty component to be replaced when the diagnosis has clearly identified the cause of the problem.

For internal engine components, correctly identifying the production series of the lawn mower is particularly important.

Wheels and control components

The wheels are continuously subjected to wear during lawn mower operation. They may gradually become worn, develop excessive play or become damaged due to uneven ground.

Depending on the MP150-46 version, different front wheel models may have been fitted. The diameter and part number should therefore be checked before ordering.

Cables, levers and other control components should also be inspected regularly. A cable that begins to fray, seize or stretch may eventually stop transmitting the control movement correctly.

Grass collector parts

The grass collection system contains several components that can be replaced separately.

Depending on the production series, available parts may include:

• Grass collector bag.

• Grass collector cover.

• Grass collector support.

• Fixing components.

Replacing only the damaged component allows you to keep the other parts of the grass collector when they are still in good condition.

Differences depending on the manufacturing date

This point is particularly important for Scheppach MP150-46 lawn mowers, as several changes were made during the production period.

Some parts are specifically intended for machines manufactured before or after certain dates, particularly around 07/2021, 08/2022 or for more recent production series. This may apply to blades, air filters, certain grass collector parts and other mechanical components.

The MP150-46 model designation alone is therefore not always sufficient to identify the correct replacement part.

How to choose the correct part for your MP150-46

Before ordering, we recommend checking:

• Exact model: MP150-46, MP150-46E or MP150-46E SE.

• Month of manufacture.

• Year of manufacture.

• Serial number.

• Part number shown on the exploded parts diagram.

• Part number of the component currently fitted, when still identifiable.

Always check the list of compatible machines provided with the relevant replacement part.

This verification is particularly important for blades, blade holders, wheels, air filters, recoil starters, engine parts and grass collector components.

Maintaining your Scheppach MP150-46 lawn mower

Regular maintenance helps extend the service life of your machine and reduces the risk of breakdowns during the mowing season.

We particularly recommend:

• Regularly cleaning the cutting deck.

• Removing accumulated grass.

• Checking the condition of the blade.

• Inspecting the blade holder after an impact.

• Cleaning or replacing the air filter when necessary.

• Checking the spark plug.

• Regularly checking the engine oil level.

• Inspecting the wheels and their fixings.

• Checking cables and controls.

• Inspecting the grass collector.

• Replacing heavily worn or damaged parts.

These maintenance operations can also help identify a problem before it causes damage to other components.

Repair your Scheppach MP150-46 instead of replacing it

A damaged wear part does not necessarily mean that your lawn mower has reached the end of its service life. Targeted replacement of a blade, blade holder, wheel, air filter, recoil starter, ignition coil or engine component can restore the machine to proper working condition.

Browse our selection of replacement parts for Scheppach MP150-46, MP150-46E and MP150-46E SE lawn mowers and choose the part that precisely matches the version and manufacturing date of your machine.