Bernardo Metal Bandsaw Spare Parts – Repair and Maintain Your Machine

Are you looking for Bernardo metal bandsaw spare parts to replace a worn, broken or faulty component? Discover our selection of replacement parts designed for the maintenance and repair of your metal cutting bandsaw.

Bernardo metal bandsaws are used in mechanical workshops, metalworking shops, fabrication workshops and maintenance departments to perform accurate cuts in various metal profiles.

They can be used to cut tubes, solid bars, sections and other metal workpieces, within the machine's cutting capacity and with a blade suitable for the material.

Their operation relies on several mechanical and electrical components, including the motor, transmission system, pulleys, gears, worm shaft, blade guides, adjustment mechanisms and safety devices.

Over time and with regular use, certain components may wear out, become misaligned or require replacement.

At Probois Machinoutils, we offer a growing range of replacement parts for Bernardo metal bandsaws to help you repair your equipment and extend its service life.

Spare Parts for Bernardo EBS128C, EBS115 and EBS100B Metal Bandsaws

Our catalogue includes replacement components for several Bernardo metal bandsaw models, including:

• Bernardo EBS128C

• Bernardo EBS115

• Bernardo EBS100B

These machines have different specifications and designs.

The Bernardo EBS128C includes transmission, blade guidance and adjustment components for which we offer several replacement parts.

The Bernardo EBS115 shares certain component references with other metal bandsaws, particularly for blade guides and selected mechanical parts.

The Bernardo EBS100B is also covered by our spare parts range, including motor carbon brushes.

Please note that parts for these different models are not necessarily interchangeable.

It is essential to check the exact machine reference, manufacturing date and, when necessary, the item number shown on the exploded parts diagram.

Drive Belts for Bernardo Metal Bandsaws

The drive belt of a metal bandsaw plays an important role in transmitting movement from the motor to the drive mechanism.

A drive belt in good condition helps ensure smooth operation and efficient power transmission.

We offer a V-belt for the Bernardo EBS128C, also compatible with Holzmann BS128HDR bandsaws and certain Holzmann BS115 versions, depending on their manufacturing date.

A worn or damaged drive belt may cause various symptoms:

• Slipping during operation.

• Irregular power transmission.

• Unusual noises.

• Reduced drive efficiency.

• Loss of movement if the belt breaks.

Before replacing a drive belt, check its profile, dimensions and reference.

A belt with a similar length is not necessarily compatible if its profile or technical specifications differ.

Drive Pulleys, Wheels and Gears for the Bernardo EBS128C Metal Bandsaw

The transmission system of a Bernardo EBS128C metal bandsaw includes several mechanical components designed to transmit and adapt the movement generated by the motor.

Our catalogue includes various transmission parts:

• Drive wheel, item 35 – ref. 10009162: designed for Bernardo EBS128C and Holzmann BS128HDR bandsaws manufactured before June 2019.

• Upper drive pulley, item 34: designed for Bernardo EBS128C and Holzmann BS128HDR bandsaws manufactured from June 2019 onwards, according to the specified part reference.

• Gear, item 50: offered for certain Bernardo EBS128C and Holzmann BS128HDR versions, particularly machines manufactured from April 2020 onwards.

• Worm shaft, item 85 – ref. 10000462: designed for the transmission mechanism of Bernardo EBS128C and Holzmann BS128HDR bandsaws.

These components contribute to the operation of the machine's drive system.

Wear or damage to one of these parts may cause mechanical noises, irregular drive operation or a blocked mechanism.

The manufacturing date is particularly important when identifying the correct transmission parts.

Some component references have changed during production and cannot be replaced without checking compatibility.

Upper and Lower Blade Guides for Bernardo Metal Bandsaws

Blade guides for Bernardo metal bandsaws are essential for keeping the blade correctly positioned during cutting operations.

They help limit lateral blade movement and improve cutting consistency.

Our catalogue includes:

• Upper blade guide for Bernardo EBS128C and EBS115, also compatible with certain Holzmann BS128HDR and BS115 models.

• Lower blade guide for Bernardo EBS128C and EBS115, also listed for the corresponding Holzmann models.

These components may require replacement if they show significant wear, deformation or excessive play.

A defective blade guide can cause:

• Poor blade stability.

• Irregular cuts.

• Blade deviation during cutting.

• Unusual vibrations.

• Premature blade wear.

However, a cut that deviates is not necessarily caused by a defective blade guide.

Blade tension, tooth condition, guide adjustment and the pressure applied during cutting should also be checked.

Hydraulic Downfeed Cylinder for the Bernardo EBS128C Metal Bandsaw

Some metal bandsaws are equipped with a hydraulic cylinder that controls the downward movement of the saw bow during cutting.

This device helps regulate the rate at which the blade descends into the material.

We offer a hydraulic downfeed cylinder for the Bernardo EBS128C metal bandsaw, also listed for the Holzmann BS128HDR.

A defective hydraulic cylinder may cause:

• The saw bow to descend too quickly.

• Irregular downward movement.

• Difficulty controlling the feed rate.

• Reduced effectiveness of the downfeed control system.

• Oil leakage from the component.

Uncontrolled downward movement can place excessive stress on the blade and affect cutting quality.

Before replacing the hydraulic cylinder, also check the downfeed system adjustments and mechanical mounting points.

Handwheels, Threaded Rods and Adjustment Mechanisms

The adjustment mechanisms of a Bernardo metal bandsaw allow various settings to be made for proper machine operation.

Our catalogue includes:

• Adjustment handwheel, item 124: designed for Bernardo EBS128C and EBS115, as well as the corresponding Holzmann models.

• Threaded handwheel rod, item 37 – ref. 10003266: compatible with Bernardo EBS128C and EBS115, according to the listed references.

These components are involved in adjusting and positioning the relevant mechanical assemblies.

A broken handwheel, damaged threaded rod or worn thread may make certain adjustments difficult, inaccurate or impossible.

Before ordering, compare the shape, dimensions and mounting points of the original component.

Motor Carbon Brushes and Electrical Components for Bernardo Metal Bandsaws

The proper operation of the motor and its electrical components is essential for driving the saw blade.

Our catalogue includes motor carbon brushes for the Bernardo EBS100B metal bandsaw, also compatible with the Leman SRM100.

In motors equipped with carbon brushes, these components transfer electrical current to the commutator.

They are wear parts that may require replacement after prolonged use.

Severely worn carbon brushes may cause:

• Starting difficulties.

• Intermittent motor operation.

• Reduced power.

• Abnormal sparking at the commutator.

• Motor failure.

However, the overall condition of the motor should be checked before concluding that worn carbon brushes are responsible.

We also offer various electrical components, including switches and capacitors, whose compatibility must be checked against the machine's technical specifications.

A switch or capacitor should never be selected solely on appearance: its electrical specifications must match those of the original component.

Seals and Other Mechanical Components

The proper operation of a Bernardo metal bandsaw also depends on several smaller mechanical components.

Our catalogue includes a seal, item 49 – ref. 10004499, designed for Bernardo EBS128C and Holzmann BS128HDR metal bandsaws.

A seal helps prevent leakage from the mechanical assembly in which it is installed.

When worn, deformed or damaged, replacement may be necessary to restore proper sealing.

Other components, such as screws, shafts, fasteners, transmission parts and adjustment mechanisms, may also require attention during the machine's service life.

The availability of these parts depends on the model and the references listed in our catalogue.

Compatibility of Bernardo Spare Parts with Holzmann Metal Bandsaws

Certain Bernardo metal bandsaw spare parts are also compatible with Holzmann machines.

This compatibility applies in particular to several shared component references for:

• Bernardo EBS128C and Holzmann BS128HDR.

• Bernardo EBS115 and Holzmann BS115.

Depending on the part, these may include drive belts, blade guides, pulleys, drive wheels, gears or other mechanical components.

However, this does not mean that every component used on these machines is identical.

Some references vary according to the manufacturing date.

This is particularly important for certain transmission components, where differences exist between machines manufactured before and after June 2019 or from April 2020 onwards.

Always check the compatibility information provided on each product page before ordering.

How to Identify the Correct Spare Part for Your Bernardo Metal Bandsaw

Before ordering a Bernardo metal bandsaw spare part, several checks are recommended.

1. Identify the exact machine model

Check the machine's identification plate to determine its precise reference: EBS128C, EBS115, EBS100B or another model.

2. Check the manufacturing date

Some components have changed during production.

The manufacturing date may therefore be essential to distinguish between different versions of the same part.

3. Consult the exploded parts diagram

The exploded diagram allows you to identify the machine's components and locate their corresponding item numbers.

4. Compare the component specifications

Check the dimensions, mounting points, references and, for electrical parts, the technical specifications.

5. Contact us if you are unsure

If you cannot find the required part, please provide the exact model of your Bernardo bandsaw, its manufacturing date and the item number shown on the exploded parts diagram.

This information will help us review your request more efficiently.

Why Does a Bernardo Metal Bandsaw No Longer Cut Straight?

A metal bandsaw that produces crooked cuts does not necessarily have a major mechanical fault.

Several factors may cause this problem:

• A worn blade or damaged teeth.

• Insufficient blade tension.

• Incorrectly adjusted upper or lower blade guides.

• Excessive play in the blade guidance system.

• An unsuitable cutting speed for the material.

• Excessive downfeed pressure.

• A workpiece that is not securely clamped in the vice.

• A blade that is unsuitable for the metal type or section being cut.

Before replacing any component, it is advisable to check these different points.

Correct machine adjustment and the use of a suitable blade can often significantly improve cutting quality.

When Should You Replace a Part on a Bernardo Metal Bandsaw?

Certain symptoms may indicate that a component of your Bernardo metal bandsaw needs inspection or repair.

Common warning signs include:

• The machine no longer starts.

• The motor runs, but the blade is not driven correctly.

• The transmission system produces unusual noises.

• A drive belt shows cracks or signs of wear.

• A gear or drive wheel is damaged.

• The blade has excessive play in its guides.

• The saw bow descends too quickly or irregularly.

• An adjustment handwheel spins freely or no longer works.

• A leak appears around a mechanical assembly.

• The motor operates intermittently.

These symptoms do not always identify the component responsible for the fault.

A preliminary diagnosis is therefore recommended to avoid unnecessarily replacing parts that are still working correctly.

Always disconnect the machine from the electrical supply before carrying out any maintenance or repair work. Electrical repairs and work involving safety devices must be performed by a qualified person.

How to Maintain Your Bernardo Metal Bandsaw

Regular maintenance helps preserve performance and extend the service life of your Bernardo metal bandsaw.

Recommended maintenance practices include:

• Regularly remove metal chips accumulated inside the machine.

• Check blade condition and tension.

• Inspect the upper and lower blade guides.

• Examine the condition of the drive belt when fitted.

• Listen for unusual noises from pulleys and transmission mechanisms.

• Check the operation of the hydraulic downfeed system when fitted.

• Inspect screws, fasteners and adjustment mechanisms.

• Make sure workpieces are securely clamped in the vice.

• Use a blade suitable for the material and section being cut.

• Follow the manufacturer's recommendations for lubrication and mechanical maintenance.

• Keep guards and safety devices in good condition.

A properly maintained machine helps reduce breakdowns, limit premature component wear and maintain good cutting accuracy.

Why Buy Bernardo Metal Bandsaw Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we understand that a mechanical or electrical breakdown can quickly put an essential metalworking machine out of service.

That is why we are continuously developing our range of Bernardo metal bandsaw spare parts to make maintenance and repairs easier.

By choosing Probois Machinoutils, you benefit from:

• A dedicated category for Bernardo metal bandsaw spare parts.

• Components designed for the Bernardo EBS128C, EBS115 and EBS100B, among other models.

• Transmission parts such as drive belts, pulleys, drive wheels, gears and worm shafts.

• Upper and lower blade guides for proper blade support.

• Mechanical parts including handwheels, threaded rods, seals and hydraulic cylinders.

• Electrical components and motor carbon brushes for applicable models.

• Parts that are also compatible with certain Holzmann metal bandsaws.

• A continuously expanding selection of replacement components.

• Assistance with identifying parts compatible with your machine.

Looking for a part that is not yet listed in our catalogue?

Please provide the exact model of your Bernardo metal bandsaw, its manufacturing date and the corresponding item number from the exploded parts diagram. We can review your request and check possible sourcing options.

Discover our selection of spare parts for Bernardo EBS128C, EBS115 and EBS100B metal bandsaws and extend the service life of your machine with suitable replacement components.