Spare Parts for Mac Allister Log Splitters: Repair and Maintain Your Equipment
Are you looking for spare parts for your Mac Allister log splitter to repair a fault, replace a worn component or maintain your equipment? At Probois Machinoutils, we offer a selection of replacement parts designed to extend the service life of your log splitter and help maintain its performance.
Mac Allister log splitters are used to prepare firewood for fireplaces, wood-burning stoves and heating systems. Thanks to their hydraulic mechanisms, these machines split logs by applying considerable pressure, reducing the physical effort required compared with manual splitting.
Like all hydraulic machines, log splitters contain mechanical, electrical and hydraulic components that may wear out over time. Seals, pistons, control valves, switches and guide components may eventually require replacement.
Our catalogue includes a range of Mac Allister log splitter spare parts for different models, as well as components used on selected Scheppach, Woodster and Kity machines.
Spare Parts for Mac Allister MAC HS 4T, MAC HS 5T UG and MAC HS 10T Log Splitters
Mac Allister log splitters are available in several versions, including the MAC HS 4T, MAC HS 5T UG and MAC HS 10T models. Depending on their design, these machines have different splitting capacities, structures and hydraulic components.
Horizontal log splitters with a splitting force of 4 or 5 tonnes are particularly popular for preparing domestic firewood. Their compact design makes them suitable for installation in a garage, workshop or garden shed.
Higher-capacity models may feature a vertical construction and specific hydraulic components designed to withstand greater splitting forces.
It is therefore essential to check the exact reference of your machine before ordering a replacement part. A seal, piston or valve intended for a 4-tonne horizontal log splitter will not necessarily fit a 10-tonne vertical model.
The compatibility information provided on each product page helps identify the relevant machines. If you are unsure, we recommend comparing the original part with the available photographs, dimensions and reference numbers.
Hydraulic Seals for Mac Allister Log Splitters
Hydraulic seals for log splitters ensure the tightness of the different components within the hydraulic system. They help maintain the pressure required to move the piston and generate the splitting force.
Over time, seals may harden, deform or deteriorate due to temperature variations, hydraulic pressure and repeated mechanical stress.
A defective seal may cause an oil leak, loss of splitting power or irregular cylinder operation.
Our selection includes piston seals for 4 and 5-tonne horizontal log splitters from Scheppach, Woodster and Mac Allister.
We also offer a sealing ring, reference 3905202142, measuring Ø40 x 7 x Ø29 mm, intended for various horizontal log splitters.
Other seals, sealing rings and O-rings are available for selected models. Dimensions and compatibility must always be checked before ordering.
Hydraulic Pistons and Cylinders for Log Splitters
The hydraulic piston is an essential component of the splitting mechanism. Under the pressure of hydraulic oil, it allows the ram to move and apply the force required to split a log.
A damaged piston or hydraulic cylinder may cause movement difficulties, pressure loss or reduced splitting force.
Our catalogue includes a piston, reference 16040203, intended for selected 5-tonne horizontal log splitters from Scheppach, Woodster and Kity.
We also offer a hydraulic cylinder, reference 16040212, for certain 5-tonne horizontal models.
These references are not automatically compatible with every Mac Allister log splitter. It is essential to compare your machine's specifications with those listed on the relevant product page.
Before replacing a piston or cylinder, we recommend checking the condition of the seals, the hydraulic oil level and the overall operation of the hydraulic system.
Hydraulic Control Valves for Mac Allister Log Splitters
The control valve of a log splitter regulates the flow of hydraulic oil and controls the movements of the splitting mechanism.
It plays an important role in the machine's operation, particularly when activating the ram and controlling its return.
Our catalogue includes a control valve, reference 3905201028, offered for various 4 to 7-tonne horizontal log splitters from Scheppach, Woodster and Mac Allister.
We also offer a housing with a regulating valve for selected Scheppach, Kity and Mac Allister log splitters.
A faulty valve may cause control difficulties, irregular piston movement or a loss of hydraulic functionality.
However, these symptoms may also result from insufficient oil, a leak, a pump problem or another defective component. An accurate diagnosis is essential before replacing the valve.
Control Levers and Pushers for Log Splitters
The control lever of a hydraulic log splitter allows the operator to activate the splitting mechanism under the conditions specified by the manufacturer.
On many horizontal log splitters, the control system is designed for two-handed operation to reduce the risk of contact with moving components.
Our selection includes a control lever intended for certain 4 and 6.5-tonne horizontal log splitters from Scheppach, Woodster and Mac Allister.
We also offer a pusher, reference 3905201035, identified as position 51 on certain exploded diagrams, for various 4 to 7-tonne horizontal log splitters.
A bent, broken or excessively loose control lever may interfere with the machine's operation. A damaged pusher may also cause movement difficulties.
Control and safety devices must never be bypassed or modified. Any replacement part must comply with the machine's original configuration.
Complete Switch Assemblies for Mac Allister Log Splitters
The electrical switch of a log splitter controls the power supply to the motor that drives the hydraulic pump.
A defective switch may prevent the machine from starting or cause interruptions during operation.
Our catalogue includes a complete switch assembly with housing and capacitor, offered for certain 4 and 5-tonne horizontal log splitters from Scheppach, Woodster and Mac Allister.
We also offer a switch housing, identified as position 193, for selected Scheppach, Kity and Mac Allister models.
Before replacing the switch, it is important to check the power supply, cable condition, protective devices and motor specifications.
Electrical components must be replaced by a competent person, respecting the original wiring and electrical characteristics.
Hydraulic Pumps and Pump Housings for Log Splitters
The hydraulic pump of a log splitter circulates oil under pressure to supply the hydraulic cylinder and generate the splitting force.
A worn or damaged pump may result in reduced available power, irregular operation or difficulties moving the piston.
Our selection includes a gear pump housing for certain Scheppach, Kity and Mac Allister log splitters.
We also offer pump seals, reference 16040516, intended for selected Scheppach, Woodster and Kity horizontal log splitters.
Before carrying out work on the pump, it is necessary to check the overall condition of the hydraulic system, the oil level and the absence of leaks.
Hydraulic components operate under high pressure. Their disassembly and replacement require particular precautions and should be entrusted to a qualified professional whenever the intervention goes beyond the maintenance operations described by the manufacturer.
Plastic Sliding Pads and Guide Plates for Mac Allister Log Splitters
Log splitter guide pads help guide moving components and reduce friction between certain mechanical parts.
These components may gradually wear out due to repeated ram movements and the forces generated during splitting.
Our catalogue includes an upper plastic sliding pad, reference 3905202013, identified as position 50 on certain exploded diagrams, for various Scheppach and Woodster horizontal log splitters.
We also offer a lower plastic sliding pad, reference 3905202012, intended for selected 4 and 5-tonne horizontal log splitters from Scheppach, Woodster and Mac Allister.
For certain vertical log splitters, we offer a set of four upper guide plates, reference 3905312014, suitable for various 9 to 10-tonne machines.
Severely worn sliding pads may cause excessive play, poor guidance or abnormal friction. Replacing them can help restore smoother movement.
Transport Wheels for Mac Allister Log Splitters
Log splitter transport wheels make it easier to move the machine around a workshop, garage or storage area.
A cracked, broken or heavily worn wheel may make transportation difficult and compromise the equipment's stability.
Our selection includes a transport wheel, reference 16040388, measuring 145 x 40 mm, offered for certain 4 and 5-tonne horizontal log splitters from Scheppach, Woodster and Mac Allister.
Before ordering a wheel, it is important to compare its diameter, width, bore and mounting system with those of the original component.
Replacing a damaged wheel makes transporting the log splitter easier while maintaining the characteristics intended for the machine.
Hydraulic Oil Reservoirs, Covers and Dipsticks
The hydraulic oil reservoir contains the fluid required for the operation of the splitting system.
An insufficient oil level may affect hydraulic performance and cause abnormal operation.
Our catalogue includes an aluminium oil reservoir cover for certain Scheppach HL450, Mac Allister MAC and Kity PH4000 log splitters.
We also offer an oil dipstick for various Scheppach, Kity and Mac Allister log splitters.
A damaged dipstick or reservoir cover may make it difficult to check the oil level or affect the reservoir's sealing.
Before ordering, check the shape, dimensions and reference number of the original component.
It is also important to use only hydraulic oil that complies with the manufacturer's recommendations and to follow the prescribed oil level checking procedures.
How to Identify the Correct Spare Part for Your Mac Allister Log Splitter
To find the correct replacement part for your Mac Allister log splitter, it is essential to know the exact reference of your machine.
We recommend carrying out the following checks:
- Identify the model: MAC HS 4T, MAC HS 5T UG, MAC HS 10T or another reference shown on the machine.
- Check the rating plate: record the technical specifications and manufacturing information.
- Consult the exploded diagram: locate the position number corresponding to the defective component.
- Compare dimensions: check diameters, lengths, thicknesses and mounting points.
- Check the part number: compare the original reference with the one shown in our catalogue.
- Verify compatibility: review the models explicitly listed on each product page.
Some Mac Allister log splitters share components with Scheppach, Woodster or Kity models. However, a similar external appearance is not sufficient to guarantee compatibility.
If you are unsure, a photograph of the required component and the machine's rating plate may help identify the correct replacement part.
Why Is Your Mac Allister Log Splitter No Longer Splitting Logs Properly?
A log splitter that has lost splitting power may be experiencing various mechanical or hydraulic problems.
A loss of force may be caused by insufficient hydraulic oil, worn seals, a hydraulic leak, a defective valve or a pump malfunction.
If the motor operates but the ram moves with difficulty, it is important to inspect the overall operation of the hydraulic system.
If the motor does not start, the problem may be related to the electrical supply, switch, capacitor or another electrical component.
A ram that moves irregularly may also indicate worn guide components or a problem with the control system.
It is advisable not to force the machine when abnormal behaviour occurs. An appropriate diagnosis helps identify the cause of the fault before ordering the necessary replacement parts.
Maintaining Your Mac Allister Log Splitter to Extend Its Service Life
Regular maintenance helps preserve the performance of your Mac Allister hydraulic log splitter and reduce the risk of breakdowns.
Before each use, it is advisable to visually inspect the overall condition of the machine, its controls, guide components and connections.
It is also important to look for possible oil leaks and check the hydraulic fluid level according to the manufacturer's instructions.
Moving components should be kept clean and free from excessive accumulations of wood chips, bark and other debris.
The log splitter must be positioned on a stable surface and operated within the capacity limits specified by the manufacturer.
Two-handed controls, guards and other safety equipment must never be bypassed or disabled.
Before any maintenance or repair, the machine must be switched off, disconnected from the power supply and made safe. The hydraulic system must be depressurised according to the operating instructions before any work requiring it to be opened.
Why Repair Your Mac Allister Log Splitter Instead of Replacing It?
Replacing a defective component can be an economical solution when the log splitter is otherwise in good condition.
A worn hydraulic seal, damaged guide pad, broken wheel or faulty switch does not necessarily justify purchasing an entirely new machine.
A suitable repair can help extend the service life of your equipment and restore satisfactory performance when preparing firewood.
This approach also helps reduce waste and encourages more sustainable use of garden machinery.
However, major repairs, particularly those involving pressurised hydraulic components, safety devices or electrical systems, should be assessed by a qualified professional.
Order Mac Allister Log Splitter Spare Parts from Probois Machinoutils
As a specialist in machinery, tools and spare parts, Probois Machinoutils offers a selection of components for maintaining and repairing log splitters.
Our category dedicated to Mac Allister log splitters includes hydraulic seals, pistons, control valves, levers, switches, sliding pads, transport wheels, pump housings, oil dipsticks and other replacement components.
We also offer parts listed for selected Scheppach, Woodster and Kity machines, which may share components with certain Mac Allister models.
Each product page provides available information to help you check dimensions, reference numbers and stated compatibility.
If you are looking for a particular component for your Mac Allister MAC HS 4T, MAC HS 5T UG or MAC HS 10T log splitter, please contact our customer service team with the exact model and, if possible, a photograph of the original part.
Explore our selection of spare parts for Mac Allister log splitters and find the components you need to maintain your machine, carry out suitable repairs and continue preparing firewood under the best possible conditions.