Pressure gauge 40 mm for compressor Scheppach, Dexter, Aircase
This 40 mm diameter pressure gauge is mounted on various Scheppach, Dexter and Aircase or Airbox compressors!
This 40 mm diameter pressure gauge is mounted on various Scheppach, Dexter and Aircase or Airbox compressors!
Carbon brushes for vertical compressor Scheppach, Dexter and Aircase
Belt for vertical compressor Scheppach, Dexter and Aircase
Are you looking for a spare part for your Dexter Airbox air compressor to repair your equipment, replace a worn component or extend its service life? At Probois Machinoutils, we offer a selection of replacement parts for maintaining and repairing Dexter air compressors and certain compatible models from Scheppach and Aircase.
The Dexter brand, distributed through retailers including Leroy Merlin, offers a range of equipment for DIY, maintenance and home improvement projects. Its air compressors can be used to power suitable pneumatic accessories, inflate tyres and other items, perform cleaning and blowing operations, and carry out various tasks requiring compressed air.
Over time and with repeated use, some components may wear out or develop faults. A damaged pressure gauge, worn motor carbon brushes or a deteriorated drive belt can affect the operation of certain compressor models.
Rather than immediately replacing the entire machine, it may be worthwhile identifying the component responsible for the problem and finding a compatible replacement part for your Dexter Airbox compressor.
Our selection includes pressure gauges, motor carbon brushes and drive belts. However, some parts listed in this category are also intended for vertical air compressors. Their compatibility with your exact model must always be checked before ordering.
A Dexter air compressor contains various mechanical, electrical and pneumatic components responsible for producing, circulating and controlling compressed air.
Depending on its design, a compressor may include an electric motor, a compression mechanism, a pressure regulation system, a pressure gauge and various transmission components.
When one of these components becomes defective, replacing it may restore the equipment to working condition, provided that the diagnosis is correct and the repair follows the manufacturer's instructions.
In this category, you can find:
These components serve different purposes. The pressure gauge is used to monitor air pressure, carbon brushes provide electrical contact in certain brushed motors, and the drive belt transmits movement in compressors equipped with this type of mechanism.
It is therefore important to identify the exact cause of a malfunction before selecting a replacement part.
The pressure gauge for Dexter Airbox air compressor is a measuring instrument that displays the air pressure in the pneumatic circuit to which it is connected.
Depending on the compressor's configuration, the gauge may indicate the pressure inside the air receiver or the pressure available at the regulator outlet.
Reliable pressure readings are important for adjusting compressor operation to the requirements of pneumatic accessories and monitoring the machine's performance.
Our catalogue includes a 40 mm diameter pressure gauge offered for various compatible Scheppach, Dexter, Aircase and Airbox compressors.
A pressure gauge may need replacing in several situations:
Before ordering a pressure gauge for Dexter compressor, check its diameter, connection type, connection position and pressure range shown on the dial.
The 40 mm external diameter alone is not sufficient to guarantee compatibility with your equipment.
A defective pressure gauge must be replaced with a component that has the appropriate specifications for the pneumatic circuit concerned.
Motor carbon brushes for Dexter air compressors are wear components found in certain brushed electric motors.
They provide electrical contact with the motor commutator and allow the motor to operate. During use, the brushes rub against the commutator and gradually become shorter.
When the brushes become excessively worn, the motor may develop starting problems or operate irregularly.
Our catalogue includes a pair of motor carbon brushes, reference 5906117015, for certain Scheppach, Dexter and Aircase vertical air compressors.
Several symptoms may indicate that the carbon brushes should be inspected:
These symptoms may also be caused by other electrical or mechanical components. Worn carbon brushes should therefore not automatically be assumed to be the cause of the problem.
Reference 5906117015 must be compared with the original part and the list of compatible machines before purchasing.
Not all Dexter Airbox compressors necessarily use this type of motor. Some models may have a different motor design that does not require carbon brushes.
If a motor has a damaged commutator or another internal fault, replacing the carbon brushes alone may not resolve the problem.
A compressor drive belt is a transmission component used in certain machines to transfer movement from the motor to the compression mechanism.
Depending on the compressor's design, a belt may gradually wear due to operating hours, mechanical stress or incorrect alignment.
A damaged belt may cause irregular operation or prevent the correct transmission of movement.
Our selection includes a drive belt for certain Scheppach and Aircase vertical air compressors.
It is essential to check compatibility before purchasing this part for a Dexter compressor, as not all models use the same transmission system.
Several signs may indicate a worn drive belt:
Before ordering, identify the original reference number, dimensions and belt profile, as well as the exact compressor model.
A belt that deteriorates quickly may also indicate a mechanical problem, such as pulley misalignment or a defective rotating component. It is therefore important to identify the underlying cause before installing a new belt.
A Dexter Airbox air compressor may develop various operating problems after several years of use.
Some symptoms can help determine which components should be inspected first:
These indications are intended only as general troubleshooting guidance. A malfunction may have several causes and require appropriate technical intervention.
In the event of an electrical fault, a safety-related problem or a malfunction involving the pressurised circuit, it is advisable to consult a qualified professional.
Selecting a replacement part for Dexter Airbox air compressor requires accurate identification of the equipment.
Several compressors sold under the Dexter, Scheppach or Aircase brands may share design similarities. However, this does not mean that their components are automatically interchangeable.
Before ordering, we recommend checking:
For a pressure gauge, check the connection and pressure range. For motor carbon brushes, verify their dimensions, shape and motor type. For a drive belt, compare its profile, dimensions and transmission system.
It is also important not to confuse Dexter Airbox compressors with other Dexter air compressors, particularly vertical models, which may use different components.
IMPORTANT: BEFORE PURCHASING A SPARE PART, ALWAYS CHECK YOUR COMPRESSOR'S EXACT MODEL, SERIAL NUMBER AND THE COMPATIBILITY INFORMATION PROVIDED ON THE PRODUCT PAGE.
Regular maintenance helps preserve the performance of your Dexter air compressor and reduce premature wear of certain components.
After use, it is advisable to clean the external surfaces and keep the motor ventilation openings free from dust and debris.
Pneumatic connections should be inspected for possible air leaks. Hoses and accessories should also be checked for cracks or damage.
The pressure gauge should remain clearly readable and respond normally to changes in pressure.
If the compressor has a brushed motor, its carbon brushes may require periodic inspection according to the manufacturer's recommendations.
On models equipped with a belt-driven transmission, it is important to monitor the condition of the belt and follow the maintenance instructions specific to the machine.
The air intake filter, when fitted, should be maintained according to the manufacturer's recommendations to reduce the amount of dust entering the compression system.
It is also important to respect the operating duty cycle specified for the compressor to prevent overheating and excessive mechanical stress.
Before carrying out any maintenance operation, disconnect the compressor from its electrical supply, allow it to cool down and completely depressurise the system according to the manufacturer's instructions.
Safety devices, pressurised components and electrical parts must never be modified or disabled.
At Probois Machinoutils, we offer a selection of spare parts for Dexter Airbox air compressors and compatible models to help you maintain and repair your equipment.
Our catalogue includes a 40 mm pressure gauge, motor carbon brushes reference 5906117015 and a drive belt for certain vertical air compressors.
We also supply replacement parts for various Scheppach, Aircase and other compatible compressor models, depending on the available references.
The availability of individual components may vary according to stock levels and supplier deliveries.
Replacing a worn or defective component can help extend the service life of your compressor, provided that the rest of the equipment remains in good condition and the repair is technically appropriate.
Whether you are looking for a pressure gauge for Dexter Airbox compressor, carbon brushes for Dexter air compressor or a compatible drive belt, carefully review the information provided on each product page before ordering.
Discover our selection of replacement parts for Dexter Airbox air compressors and maintain your equipment regularly to preserve its performance, reliability and service life.