Laser Radial saw Scheppach, Dexter, Woodster and Parkside
Table insert for radial miter saw Scheppach, Parkside, Woodster and Dexter
16 mm Carbon brushes's caps for Scheppach, Woodster, Dexter and Parkside blade 210 to 216 mm
Brush holder reference 3901204143 for radial miter saw Scheppach, Woodstar, Parkside and Dexter according to list below
Carbon brushes for Woodstar SL8LU and Scheppach TKS1500A1
Carbon brushes for Scheppach, Woodster, Dexter and Parkside blade 210 to 216 mm
Motor for radial miter saw Scheppach HM80, Scheppach HM80LU, Scheppach HM80LXU, Scheppach MSS8, Scheppach MSS10, Scheppach HM100LXU, Woodster SX8LU, Woodster SL10LXU, Parkside PZKS 1500 A1, Dexter MS SL 8
Microswitch 3901204043 for Scheppach, Woodster, Dexter, Kity and Parkside radial mitre saws
Are you looking for spare parts for your Dexter MS SL 8 sliding mitre saw? At Probois Machinoutils, we offer a selection of replacement components designed for the maintenance and repair of this machine, sold under the Dexter brand, particularly through Leroy Merlin stores.
The Dexter MS SL 8 sliding mitre saw, also searched for under the designation Dexter MSSL8, is designed for making straight cuts, mitre cuts and bevel cuts in materials compatible with the machine and its saw blade. It is commonly used in DIY workshops and for woodworking, renovation and interior fitting projects.
Over time and with repeated use, certain components may wear out, become damaged or develop faults. Replacing a defective part can sometimes restore the saw to working condition without having to replace the entire machine.
This category brings together various replacement parts for the Dexter MS SL 8 mitre saw, including motor carbon brushes, brush holders, electrical components, table inserts and other compatible parts according to the references listed on each product page.
A sliding mitre saw consists of numerous mechanical and electrical components that must operate correctly to ensure consistent cuts and safe use. The motor drives the saw blade, while the adjustment and sliding mechanisms allow the cutting position to be adapted to the user's requirements.
When a fault occurs, it is important to identify its exact cause before ordering a replacement part. A starting problem may originate from different electrical components, while inaccurate cutting may be caused by incorrect adjustment, a worn blade or a damaged mechanical component.
The spare parts for Dexter MSSL8 mitre saws available in this category help users find the components required for certain maintenance and repair operations.
Before carrying out any work, the machine must be disconnected from the electrical supply. Repairs involving the motor, wiring or safety devices must be performed by a suitably qualified person.
Carbon brushes for the Dexter MS SL 8 saw are among the wear parts that may need replacing during the machine's service life.
In motors equipped with carbon brushes, these components provide electrical contact with the armature commutator. As they gradually wear down, they can affect motor operation and cause various symptoms.
Worn carbon brushes may lead to starting difficulties, intermittent stopping or irregular motor operation. However, these symptoms alone do not necessarily confirm that the carbon brushes are responsible for the fault.
Our catalogue includes different references of carbon brushes for Dexter mitre saws, some of which are also used on Scheppach, Woodster or Parkside machines.
It is essential to check the dimensions, shape, connections and exact compatibility of the carbon brushes before ordering. Two saw models using blades of similar diameter do not necessarily have identical electrical components.
In addition to carbon brushes, certain components used to hold them in place or provide access to them may also require replacement.
Carbon brush holders for mitre saws keep the brushes in their correct operating position. A damaged brush holder can affect brush positioning and interfere with electrical contact with the commutator.
On certain motor designs, carbon brush caps close the brush housings and provide access during maintenance operations.
Probois Machinoutils offers carbon brush holders and brush caps for various sliding mitre saws, with specific compatibility information provided on each product page.
To select the correct replacement part, we recommend comparing the component reference, dimensions and shape with the original part fitted to your Dexter MS SL 8 saw.
The electric motor is one of the main components of a sliding mitre saw. It provides the power required to rotate the blade and must operate correctly to perform cutting operations.
In the event of a major motor failure, replacement may be considered after an appropriate diagnosis.
In this category, you can find a replacement motor compatible with the Dexter MS SL 8 sliding mitre saw, also listed for certain Scheppach, Woodster and Parkside machines.
Before ordering a motor, it is important to check the exact machine reference and the compatibility information provided in the product description.
A motor that no longer starts is not necessarily defective. The problem may also come from the switch, carbon brushes, an electrical connection or another component. Preliminary checks can help avoid replacing an expensive part unnecessarily.
Installing an electric motor must be carried out in accordance with the machine's technical specifications and applicable electrical safety requirements.
Mitre saw switches and microswitches contribute to the operation of electrical controls and, depending on their position, certain safety mechanisms.
A defective microswitch may prevent a function from activating correctly or cause intermittent operation.
We offer the microswitch reference 3901204043, designed for several mitre saw models from Scheppach, Woodster, Dexter, Kity and Parkside, according to the stated compatibility information.
Before replacing a switch, it is important to check its reference, contact configuration, mounting system and function within the electrical circuit.
Safety devices must never be removed, bypassed or disabled in order to restore machine operation.
If you are unsure about the cause of an electrical fault, it is advisable to have the saw inspected by a qualified professional.
On models equipped with this feature, the mitre saw laser guide projects a cutting reference onto the workpiece.
This accessory can make it easier to position the material before cutting, particularly during repetitive work or operations requiring accurate alignment.
A laser that no longer lights up or operates irregularly may have a power supply fault, a connection problem or a defective laser module.
This category includes a laser reference designed for various sliding mitre saws from Scheppach, Dexter, Woodster and Parkside.
Compatibility with your exact model must be checked before ordering. After replacement, the laser cutting line should be inspected and adjusted if necessary, following the manufacturer's instructions.
The laser is a positioning aid and does not replace measurement checks, correct machine adjustments or safety devices.
The table insert for a sliding mitre saw is a component located around the blade opening in the cutting table.
Depending on the machine's design, this part helps support the material close to the cutting area and limits the openings surrounding the saw blade.
Over time, a table insert may become marked by blade passes, crack or suffer damage following incorrect adjustment or a cutting incident.
A damaged insert should be inspected and replaced when its condition no longer allows the saw to be used as intended.
Probois Machinoutils offers table inserts for mitre saws compatible with various Scheppach, Woodster, Parkside and Dexter models.
Before purchasing, it is essential to check the dimensions, mounting points and stated compatibility with the Dexter MS SL 8 saw.
When ordering a spare part for a Dexter MS SL 8 sliding mitre saw, we recommend first checking the information on your machine's identification plate.
The commercial model name is not always sufficient to identify a component, as some machines may exist in different versions or have undergone manufacturing changes.
To reduce the risk of ordering the wrong part, several checks are recommended:
This procedure is particularly important for electrical parts, motors, carbon brushes and components that may exist in several versions.
Some sliding mitre saw spare parts can be used on several machines marketed under different brand names.
This is particularly true of certain carbon brushes, motors, microswitches and table inserts available in our catalogue.
Some components may therefore be compatible with Dexter, Scheppach, Woodster or Parkside models, but this does not mean that all machines from these brands are identical.
Compatibility must always be checked individually for each component. A similar external appearance or identical saw blade diameter does not guarantee that parts are interchangeable.
The references and compatible model lists provided on our product pages are therefore essential when selecting the correct replacement component.
When a mitre saw develops a localised fault, replacing a component can be a worthwhile solution to extend its service life.
Replacing worn carbon brushes, a damaged table insert or a defective switch may restore normal operation, provided that the fault has been correctly identified and the machine remains in good overall condition.
Repairing a machine can also help prevent premature equipment replacement and reduce waste associated with electrical power tools.
However, it is essential to assess the overall condition of the saw. A machine with structural damage, a serious guiding defect or a safety-related problem must not be returned to service without appropriate inspection and repair.
As a specialist in woodworking machinery, tools and spare parts, Probois Machinoutils helps users maintain and repair their equipment.
In this category dedicated to the Dexter MS SL 8 sliding mitre saw, you will find a selection of replacement components, including motor carbon brushes, brush holders, brush caps, motors, microswitches, laser guides and table inserts.
Each product page provides available technical specifications and compatibility information to help you select the appropriate part.
If you cannot find the reference you need, you can contact our customer service team with the exact model of your machine and, if possible, a photograph of the part to be replaced.
Explore our range of spare parts for Dexter MS SL 8 and MSSL8 sliding mitre saws to maintain your machine and continue your woodworking, DIY and interior fitting projects.
