Mechanical planing height indicator diameter 18 mm
V-belt for jointer Bernardo FS310(P) and Holzprofi Maker DR310
Insert screw M6x16 for Bernardo FS310PS and Holzprofi Maker DR310 helical shaft jointer
Replacement screw (10 pieces) for helical shaft of Bernardo ADM260S / AD260S / FS310PS / PT310S thicknesser planer
Bernardo 6 Nm torque screwdriver designed for tightening carbide inserts on the helical shafts of Bernardo planer jointers
Single-phase motor for jointer, planer FS310P(S) and Holzprofi Maker DR310
Table extension for Holzprofi Maker DR310 and Bernardo FS310PS thicknesser and planer
Table extension for Holzprofi Maker DR250 thicknesser and planer
Table extension support for Holzprofi Maker DR310 and Bernardo FS310PS thicknesser and planer
Security Contactor for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Key for tightening carbide inserts on the helical shafts of Bernardo planer jointers
76 link chain for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
90 link chain for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Extension spring Ø16 mm, wire Ø2 mm, body length 47.3 mm and overall length 78.6 mm, compatible with several Bernardo and Holzprofi planer thicknessers. Part No. 336.
Compression spring Ø17 x 54 mm, wire Ø3 mm, compatible with several Bernardo, Holzprofi and Jean l'Ébéniste planer thicknessers. Part No. 84 on ADM/PT models and Item No. 325 on FS310P and FS310PS models.
Switch 230V for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Electrical outlet 230V for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Chuck Protector for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Wheel for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Flywheel for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Foot for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Blade clamp in 310 mm for planer thicknesser Scheppach Plana 4.1c and Bernardo FS310P - Sold individually without screws
Pinion reference 318 for Bernardo FS310PS and Holzprofi DR310 thicknesser planer
Chain tensioner n° 337 and 338 for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Table locking handle 12 mm n° 206 and 207 for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Cover plate n° 406 for Planer and thicknesser Bernardo FS310P(S) and Holzprofi Maker DR310
Table extension for Holzprofi Maker DR410
M10 female indexable handle for clamping the guide of various planer/jointer machines according to the list below.
Tilting planing guide for Bernardo FS310P(S) and Holzprofi Maker DR310
Replacement bush (sleeve) ref. No. 573 and No. 311 compatible with ADM260, AD260S, ADH250P, PT310 and FS310PS. Durable part ensuring precise guidance, reduced friction, and long service life.
The Bernardo FS310P and FS310PS planer thicknessers are woodworking machines designed for surface planing and thicknessing solid timber. They allow users to prepare wooden workpieces by producing flat surfaces, straight edges and consistent thicknesses.
Used in joinery workshops, woodworking businesses and furniture-making environments, these machines require regular maintenance to preserve their accuracy and reliable operation.
Over time, certain components may show signs of wear, including drive belts, transmission chains, pulleys, springs, switches, contactors and adjustment mechanisms.
At Probois Machinoutils, we offer a selection of spare parts for Bernardo FS310P and FS310PS to help you maintain, repair and extend the service life of your planer thicknesser.
Our catalogue also includes components for the version equipped with a carbide insert cutterhead, along with accessories designed to improve the convenience and efficiency of your woodworking machine.
The Bernardo FS310P and FS310PS drive belt transmits power from the motor to the driven mechanisms.
It is an important component for ensuring smooth and reliable machine operation.
A worn, loose or damaged belt can cause problems such as:
Unusual noises during operation.
Belt slipping during planing or thicknessing.
Excessive vibrations.
Irregular power transmission.
Premature wear of the pulleys.
We offer a V-belt compatible with the Bernardo FS310P and FS310PS, also used on certain Holzprofi Maker DR310 machines.
Before ordering a replacement belt, check the specifications of the original component and the compatibility information provided on the product page.
The Bernardo FS310P and FS310PS transmission chains contribute to the operation of the planer thicknesser's mechanical systems.
Depending on their location, they transmit movement between different mechanical components.
Our selection includes:
76-link transmission chain, diagram reference 320.
90-link transmission chain, diagram reference 321.
Drive sprocket, diagram reference 318.
Chain tensioner, diagram references 337 and 338.
Various tension and compression springs.
A worn or loose chain may cause mechanical noises, irregular operation or incorrect synchronisation of the relevant mechanism.
Replacing a worn sprocket or tensioner may also be necessary when excessive wear prevents the transmission system from operating correctly.
To select the correct chain for Bernardo FS310, check the number of links and the reference number shown on the machine's exploded parts diagram.
Electrical components play an essential role in the operation and safety of your planer thicknesser.
Our catalogue includes several electrical spare parts for Bernardo FS310P and FS310PS, such as:
230 V single-phase motor.
230 V switch assembly.
Safety contactor.
230 V electrical socket.
Other electrical components, depending on the machine version.
A motor that has difficulty starting, produces unusual noises or overheats should be inspected before any repair is carried out.
Similarly, a faulty switch or contactor may prevent the machine from starting or cause operational problems.
However, these symptoms can have several possible causes, so a proper diagnosis is important before replacing any component.
Before carrying out electrical work, the machine must be completely disconnected from the power supply, and all necessary checks should be performed by a qualified person.
The Bernardo FS310PS is equipped with a cutterhead using replaceable carbide inserts, unlike the version fitted with conventional straight planer blades.
This cutting system requires specific components to ensure that the inserts are securely mounted and correctly replaced.
Our selection includes:
M6 x 16 mm carbide insert fixing screws.
Replacement screw sets for the insert cutterhead.
Tools for tightening carbide inserts.
Bernardo 6 Nm torque screwdriver.
Fixing screws must remain in good condition to ensure that the carbide inserts are securely held in place.
A screw with a damaged drive recess or worn thread must be replaced with a suitable reference.
Using a torque-controlled tool allows the specified tightening torque to be applied to the relevant fasteners without overtightening.
Always follow the manufacturer's instructions regarding screw specifications, carbide inserts and installation procedures.
Important: parts specifically designed for the FS310PS insert cutterhead must not be confused with components used on the conventional straight-blade cutterhead of the FS310P.
When working with long pieces of timber, fitting a table extension to the Bernardo FS310PS can make handling easier.
Our catalogue includes a table extension compatible with the Bernardo FS310PS and certain Holzprofi Maker DR310 machines.
We also offer the corresponding table extension support.
These accessories increase the available support surface for wooden workpieces, helping improve stability during surface planing or thicknessing operations.
A correctly installed extension makes handling longer workpieces easier and helps reduce the risk of tipping.
However, it is essential to check compatibility with the exact machine model and follow the installation instructions.
The Bernardo FS310P and FS310PS planer fence helps guide and position timber during edge jointing operations.
A correctly adjusted fence is essential for achieving consistent angles and accurate joints.
Our selection includes:
1000 mm tilting planer fence, supplied without its support.
Indexing handles for table locking.
Thicknessing table height adjustment handwheel.
Mechanical thickness indicator, subject to compatibility.
Replacement bushes and sleeves.
A bent fence, damaged locking handle or excessively loose adjustment handwheel can make machine adjustments difficult and affect machining accuracy.
Replacing these components helps restore comfortable operation and reliable adjustments.
Safety devices help protect the operator during surface planing and thicknessing operations.
Our catalogue includes a cutterblock guard for Bernardo FS310P and FS310PS, diagram reference 406, as well as a mortising chuck cover for compatible configurations.
The cutterblock guard helps prevent access to the unused section of the cutting tool during surface planing.
A broken, bent or incomplete guard must be replaced before the machine is used again.
The mortising chuck cover protects the relevant area when the mortising attachment is not in use.
Never disable safety devices, and always operate the machine according to the manufacturer's instructions.
The Bernardo FS310P and FS310PS belong to the same family of planer thicknessers, but they differ in their cutting systems.
The Bernardo FS310P uses a cutterhead fitted with conventional straight planer blades.
The Bernardo FS310PS features a cutterhead equipped with replaceable carbide inserts.
This distinction is particularly important when choosing cutting tools and cutterhead-related spare parts.
Some mechanical and electrical components may be shared between the two models, including certain transmission, adjustment and control parts.
Other components are specific to one version.
Before ordering a Bernardo FS310 spare part, always check the exact machine reference and the compatibility information provided on the product page.
Some Bernardo FS310P and FS310PS spare parts are also compatible with the Holzprofi Maker DR310 planer thicknesser.
This compatibility applies to certain mechanical and electrical components available in our catalogue, including selected belts, chains, switches, motors, handles and accessories.
However, not all components of these machines are interchangeable.
Differences in machine versions, assembly configurations or technical specifications may require different replacement parts.
To avoid ordering mistakes, always consult the compatible models listed on each product page.
To identify the correct spare part for your Bernardo FS310P or FS310PS planer thicknesser, several checks are recommended.
Identify the exact model: Check the reference shown on the machine's identification plate.
Consult the exploded parts diagram: The diagram reference number makes it easier to locate the required component.
Check the dimensions: Compare the measurements of belts, pulleys, springs, screws and other parts with the original components.
Verify electrical specifications: Check the voltage and reference numbers of motors, switches and contactors.
Confirm compatibility: Some parts are shared between the Bernardo FS310P, FS310PS and Holzprofi Maker DR310, while others are model-specific.
These precautions help prevent ordering errors and ensure that the selected component is suitable for your machine.
Regular maintenance is essential to preserve the performance of your Bernardo FS310 planer thicknesser.
We recommend:
Cleaning the surface planing and thicknessing tables regularly.
Checking the condition and tension of the drive belt.
Inspecting chains, sprockets and tensioners.
Checking the condition of planer blades or carbide inserts, depending on the version.
Checking that mechanical components are correctly tightened.
Keeping mechanisms clean and properly maintained.
Inspecting the operation of adjustment handles and handwheels.
Regularly checking safety guards and protective devices.
Adjusting the depth of cut according to the width and hardness of the timber.
Before performing any maintenance, switch off the machine and disconnect it completely from the power supply.
Proper maintenance helps reduce the risk of breakdowns, maintain machining quality and extend the service life of the machine's components.
At Probois Machinoutils, we offer a selection of spare parts for Bernardo FS310P and FS310PS planer thicknessers to help you maintain and repair your woodworking machine.
Our catalogue includes drive belts, transmission chains, sprockets, tensioners, motors, switches, safety contactors, carbide insert screws, planer fences, cutterblock guards and adjustment accessories.
Some references are also compatible with Holzprofi Maker DR310 machines, provided that the compatibility information on each product page is checked.
Our range is regularly updated according to availability and customer requirements.
If you cannot find the part you need, please contact us with the exact model of your machine and, if possible, the reference number shown on its exploded parts diagram.
Find the Bernardo FS310P and FS310PS spare parts you need to maintain, repair and extend the service life of your planer thicknesser.
