Filter By

Price

Price

  • €8.00 - €35.00

Availability

Availability

Spare parts for Parkside PTK 2000 A1 table saw

Spare parts for Parkside PTK 2000 A1 table saw - Probois Machinoutils

Active filters

Switch for Scheppach band saws

34,99 € Tax included

Switch for Scheppach HBS300 and Scheppach HBS300XWB band saws and Scheppach HS260L table saw or HD12 chip vacuum cleaner

Spare Parts for Parkside PTK 2000 A1 Table Saw: Maintain and Repair Your Machine

Are you looking for a spare part for your Parkside PTK 2000 A1 table saw to repair your machine or replace a damaged component? At Probois Machinoutils, we offer a selection of replacement parts for the maintenance and repair of this Parkside circular table saw, designed for various woodworking and timber cutting applications.

The Parkside PTK 2000 A1 is a stationary circular saw designed to perform rip cuts and crosscuts on wooden workpieces suitable for the machine's technical capabilities. It is a practical piece of equipment for DIY enthusiasts and woodworking hobbyists who want to carry out sawing operations in their workshop.

Like any woodworking machine, a circular table saw contains electrical and mechanical components, as well as protective devices that may wear out or become damaged over time.

Our catalogue includes motor carbon brushes, a KJD12 electrical switch and an inner blade guard for the Parkside PTK 2000 A1 table saw, depending on the part references and compatibility information provided on the product pages.

Replacing a defective component can often extend the service life of your machine and avoid the need for complete replacement when a repair is technically possible.

Why Replace a Spare Part on Your Parkside Circular Table Saw?

A table saw is subjected to repeated mechanical and electrical demands during cutting operations. Its motor drives the saw blade at high speed, while the various components ensure the machine operates correctly and contribute to user safety.

Over time, certain parts may show signs of wear. The carbon brushes of a motor equipped with them may gradually become shorter, an electrical switch may become faulty, and a blade guard may be damaged following an impact or incorrect handling.

These problems may cause starting difficulties, interruptions during operation or make the saw unsafe to use.

It is therefore important to identify the faulty component accurately before considering replacement. A suitable diagnosis helps distinguish an electrical fault from a mechanical problem or a defect affecting a safety device.

By choosing a replacement part suitable for the Parkside PTK 2000 A1, you can continue using your equipment for longer while respecting the manufacturer's original specifications.

Motor Carbon Brushes for Parkside PTK 2000 A1 Table Saw

Motor carbon brushes for Parkside circular saws are electrical components found in motors equipped with carbon brush systems. They provide electrical contact with the motor commutator during operation.

Our catalogue includes a pair of carbon brushes, reference 3902202119, offered for various Kity, Scheppach, Holzmann and Parkside machines, according to the list of compatible models.

During use, carbon brushes can gradually wear down due to friction. This wear may cause irregular motor operation, starting difficulties or unexpected shutdowns.

However, these symptoms do not necessarily mean that the carbon brushes are defective. Similar problems may also be caused by the switch, wiring, commutator or another electrical component.

Before ordering replacement carbon brushes, check their part reference, dimensions, shape and connection system.

Carbon brushes that look similar are not always interchangeable. Using an unsuitable model may cause poor electrical contact or damage the motor.

Replacement must be carried out according to the manufacturer's recommendations, with the machine completely disconnected from the power supply.

When Should You Replace Your Parkside Saw Motor Carbon Brushes?

Several signs may indicate that the motor carbon brushes of your Parkside table saw require inspection.

  • The motor experiences unusual starting difficulties.
  • The machine operates irregularly or stops unexpectedly.
  • The carbon brushes show significant wear during an appropriate inspection.
  • Electrical contact with the commutator is no longer maintained correctly.
  • The carbon brushes are cracked, broken or visibly damaged.

These symptoms should be interpreted carefully. An electrical diagnosis may be necessary to identify the exact cause of the fault.

When carbon brushes need replacing, it is generally advisable to follow the manufacturer's recommendations regarding replacement in pairs and inspection of the commutator.

KJD12 16 A Switch for Parkside Circular Table Saw

The electrical switch of a circular table saw controls the starting and stopping of the motor. It is an essential component of the machine's control system.

Our catalogue offers a KJD12 switch rated at 16 A – 250 V AC, intended for various Kity, Scheppach and other compatible woodworking machines.

This switch may be used to replace a defective component when its reference, electrical specifications and connection system match those required for the machine.

A damaged switch may prevent the motor from starting, cause intermittent operation or make the machine's controls unusable.

However, it is essential to confirm that the problem actually originates from the switch before replacing it.

A machine that does not start may also have a power supply fault, a motor problem or an issue with another component in the electrical circuit.

How to Choose the Correct Switch for Parkside PTK 2000 A1

Choosing a switch for the Parkside PTK 2000 A1 table saw should not be based solely on its external appearance.

Several characteristics must be compared with those of the original component:

  • Part reference: check the markings on the original switch.
  • Rated current: respect the electrical specifications required by the manufacturer.
  • Voltage: check the rated operating voltage.
  • Number of contacts: verify the electrical configuration.
  • Connections: compare the terminals and connection arrangement.
  • Dimensions: ensure the component can be installed correctly.

The KJD12 designation alone does not guarantee that all switch versions are interchangeable.

Important: any work on a circular saw's electrical circuit must be carried out by a qualified person with the machine disconnected from the power supply. Wiring must strictly follow the manufacturer's electrical diagram.

Incorrect connections may cause a short circuit, malfunction or create a danger for the operator.

Inner Blade Guard for Parkside PTK 2000 A1 Table Saw

The inner blade guard for the Parkside PTK 2000 A1 table saw is a component designed to protect the cutting area according to the machine's original construction.

Our catalogue includes an inner blade guard specifically listed for the Parkside PTK 2000 A1.

This component may become damaged following an impact, accidental contact with a moving part or improper handling.

A cracked, broken or distorted guard may no longer perform its intended function and must be inspected before the machine is returned to service.

It is important to distinguish the inner blade guard from other safety devices, including the upper blade guard and riving knife, which perform different functions.

Each safety device must be present, correctly installed and in good condition whenever its use is required.

An incompatible or incorrectly secured inner guard may also interfere with the normal operation of the saw.

Before ordering, check the exact machine reference and the shape of the original component.

Why Should You Never Use a Saw with a Damaged Blade Guard?

The protective devices of a circular saw help reduce risks associated with the rotating blade and the movement of wooden workpieces during cutting operations.

A broken or missing protective component may expose the operator to additional hazards.

It is therefore not advisable to continue operating a machine with a damaged safety device.

The guard must be replaced with a suitable component and installed according to the manufacturer's assembly instructions.

After replacement, check that the guard is correctly positioned, does not interfere with any moving parts and that all safety devices operate normally.

Spare Parts Compatible with Several Woodworking Machine Brands

Certain parts offered for Parkside machines may also be used on equipment from other brands, including Kity, Scheppach and Holzmann.

This is particularly the case for certain motor carbon brush references and electrical switches.

Compatibility across several machines can make it easier to find a replacement component when the original part is no longer easily identifiable.

However, a component used on a Scheppach or Kity machine is not automatically compatible with every Parkside circular table saw.

Technical specifications, dimensions and mounting arrangements may vary depending on the model and year of manufacture.

To avoid mistakes, each part reference must be checked individually before purchasing.

How to Identify the Correct Spare Part for Your Parkside PTK 2000 A1

To find the correct spare part for your Parkside PTK 2000 A1 circular table saw, we recommend checking the machine's identification plate and technical documentation.

Several details can help identify the correct component:

  • Exact model: Parkside PTK 2000 A1.
  • Manufacturer's reference: when shown on the identification plate.
  • Serial number: useful for identifying certain production versions.
  • Part reference: when marked on the original component.
  • Dimensions: essential for carbon brushes and protective components.
  • Electrical specifications: important for switches and motor components.

It is also important to distinguish the Parkside PTK 2000 A1 from the PTKS 2000 F4, PTKS 2000 H5 and PTKS 2200 A1 models.

These different model designations refer to table saw versions that do not necessarily share the same spare parts.

A visual resemblance between two components is therefore not sufficient to guarantee interchangeability.

Maintenance Tips to Extend the Life of Your Parkside Table Saw

Regular maintenance helps preserve the performance of your Parkside PTK 2000 A1 circular table saw and reduce the risk of breakdowns.

Before each use, check the condition of the saw blade, the correct operation of the controls and the presence of all protective devices required by the manufacturer.

Also ensure that the machine is correctly installed and that the guiding components are in good condition.

After use, disconnect the saw from the power supply and wait until the blade has stopped completely before carrying out any permitted cleaning operations.

Regularly remove sawdust and wood dust accumulated in accessible areas, following the instructions in the owner's manual.

A suitable dust extraction system helps reduce the accumulation of wood dust during cutting operations.

Avoid applying excessive force to wooden workpieces during cutting. An unsuitable feed rate or a blade in poor condition may place unnecessary strain on the motor.

Finally, any electrical, mechanical or safety-related fault must be investigated before the machine is used again.

Why Buy Parkside Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we specialise in woodworking machinery, accessories and spare parts for the maintenance and repair of workshop equipment.

We offer components for Parkside circular table saws, as well as various Kity, Scheppach and Holzmann machines.

Our selection makes it easier to find electrical components, motor carbon brushes and protective parts for different models.

Product pages provide the available part references and compatibility information to help identify the required components.

Repairing a machine whenever technically possible helps extend its service life and avoid prematurely replacing equipment that can still be used.

Order Your Spare Parts for Parkside PTK 2000 A1 Table Saw

Whether you are looking for motor carbon brushes reference 3902202119, a KJD12 16 A switch or an inner blade guard, discover our selection of replacement parts for the Parkside PTK 2000 A1 circular table saw.

Before ordering, always check the exact model of your machine and the specifications of the original component to ensure you choose a suitable replacement part.

Probois Machinoutils helps you maintain and repair your Parkside table saw with a selection of spare parts designed to preserve the operation and service life of your woodworking equipment.