Full bridge protector for thicknesser Scheppach HMS1080 and Scheppach RD255ATG
Pulley with pinion mark 83-85 for thicknesser planer Scheppach HMS850, HMS860 and HMS1080, Bernardo PT250
Planing shaft pulley mark 76 for Scheppach HMS860 and HMS1080, Bernardo PT250 jointer
Crank for thicknesser Scheppach HMS860 and HMS1080
Tensioner spring for thicknesser Scheppach HMS860 and HMS1080
Switch for thicknesser planer Scheppach HMS1070
Spring mark 37 for thicknesser Scheppach HMS860 and HMS1080
Drive chain of the rollers for thicknesser Scheppach HMS1070 series n ° 0109 and HMS1080 or Scheppach RD255ATG
Suction outlet nozzle for Scheppach HMS1080
Belt Poly V 5PJ610 for thicknesser Scheppach HMS860
Rubber roller for thicknesser Scheppach HMS1080 and Scheppach RD255ATG
Friction ring for planer and thicknesser Scheppach and Woodster
Circuit breaker for jointer, table router, table saw Scheppach, Kity, Woodster, Parkside and Dexter
Pinion for thicknesser Kity, Scheppach and Woodster width 204 and 254 mm
Pinion reference 145 for thicknesser Scheppach HMS860 and HMS1080
Clutch pinion item 70 for planer thicknesser Scheppach HMS850 with serial number starting with 0109
Part number 158 for safety and starting for various Scheppach and Woodster planer thicknessers in 204 mm width
Motor pulley reference 3902203013 for Scheppach, Bernardo, Zipper jointer-planer
Motor for Planer thicknesser Scheppach HMS1070 serie n° 0115, Kity DRA260, Bernardo PT250/PT305, Zipper HB-305
Belt poly-V 584J5 for thicknesser
The Bernardo PT250 planer thicknesser is a woodworking machine designed for surface planing and thicknessing solid timber. It allows woodworkers to prepare flat surfaces, straighten edges and machine timber to a consistent thickness.
To maintain reliable performance and extend the service life of this machine, it is essential to regularly inspect and maintain its mechanical and electrical components.
At Probois Machinoutils, we offer a range of drive belts and spare parts for the Bernardo PT250 planer thicknesser, allowing you to replace worn or damaged components without having to replace the entire machine.
Our selection includes Poly-V drive belts, transmission pulleys, feed rollers, drive chains, sprockets, springs, switches, adjustment hand cranks and cutterblock guards.
Drive belts play an essential role in the operation of the Bernardo PT250.
They transmit movement from the motor to the various mechanisms of the machine. A belt in good condition helps ensure efficient power transmission while limiting unnecessary vibrations.
Over time, a belt may stretch, crack, wear out or lose its grip.
A worn drive belt can cause several symptoms:
Reduced power during thicknessing.
Unusual noises coming from the transmission.
Belt slipping under load.
Abnormal vibrations.
Irregular operation of the driven mechanisms.
Our catalogue includes 5PJ610, 584J5 and 465J4 Poly-V belts, offered for different compact planer thicknessers.
These belts are not interchangeable. It is essential to check the reference, dimensions and compatibility information provided on each product page before ordering.
Transmission pulleys transfer movement between the different mechanical components of a planer thicknesser.
They guide the drive belts and contribute to the proper operation of the transmission system.
We offer several components for the Bernardo PT250, including:
A pulley with sprocket, corresponding to diagram positions 83 and 85.
A cutterblock pulley, corresponding to diagram position 76.
A motor pulley, depending on the machine reference and configuration.
A damaged, deformed or misaligned pulley can cause premature belt wear and abnormal vibrations.
Before replacing a pulley, it is advisable to check its condition, mounting system and alignment with the other transmission components.
The Bernardo PT250 feed roller helps move timber through the machine during thicknessing operations.
It contributes to the regular feeding of the workpiece, depending on the configuration of the feed mechanism.
We offer a rubber-coated feed roller compatible with the Bernardo PT250 and Scheppach HMS1080.
Over time, the roller covering may wear out, harden or lose its grip.
A damaged roller can cause irregular timber feeding, difficulties moving the workpiece through the machine or unwanted marks on the wood.
However, a feeding problem is not necessarily caused by the roller itself. It may also result from a drive chain, sprocket, spring or another component of the feed mechanism.
It is therefore important to inspect the entire system before ordering a replacement part.
The timber feed mechanism uses several components to transmit movement to the feed rollers.
These include drive chains, sprockets and clutch mechanisms.
In this category, you will find a feed roller drive chain offered for the Bernardo PT250 and selected 254 mm Scheppach planer thicknessers.
We also offer various sprockets, including transmission sprockets and clutch sprockets designed for different compact woodworking machines.
A loose chain, worn sprocket or damaged teeth can interfere with the feeding mechanism.
Possible symptoms include irregular feeding, mechanical noises or complete interruption of the feed movement.
Before ordering, it is essential to check the part reference against the machine's exploded parts diagram.
Springs for the Bernardo PT250 planer thicknesser are used in various tensioning, return and holding mechanisms.
They help certain components maintain their correct position or apply the required pressure during operation.
Our catalogue includes a tension spring and a spring corresponding to diagram position 37, offered for the Bernardo PT250 and selected Scheppach HMS860 and HMS1080 machines.
A broken, deformed or weakened spring may cause the associated mechanism to operate incorrectly.
Before replacing it, it is important to identify its exact position and function within the machine.
The dimensions and characteristics of the original spring must also be respected.
The Bernardo PT250 switch is an important component of the machine's electrical control system.
It allows the machine to be started and stopped according to its electrical configuration.
We offer a KJD12 switch with 4 terminals, rated 16(12) A, listed for the Bernardo PT250 and selected Scheppach machines.
A defective switch can cause starting difficulties or prevent the machine from switching on.
However, a planer thicknesser that fails to start does not necessarily have a faulty switch.
It is advisable to check the electrical supply, safety devices, protective systems and other electrical components before concluding that the switch is defective.
All work on electrical components must be carried out with the machine disconnected from the power supply and by a suitably qualified person.
The Bernardo PT250 bridge-type cutterblock guard is a safety component designed to cover the unused section of the cutterblock during surface planing operations.
It helps reduce access to the rotating cutting tools.
We offer a complete bridge-type guard for the Bernardo PT250 and Scheppach HMS1080.
A broken, deformed or incorrectly functioning guard must be repaired or replaced before the machine is used.
It is essential to keep all safety devices specified by the manufacturer in place and never operate the machine with a required guard missing or defective.
The adjustment hand crank is used to manually operate certain adjustment mechanisms of the planer thicknesser.
Depending on its position, it allows the operator to adjust specific parts of the machine.
We offer a hand crank compatible with the Bernardo PT250, also listed for selected Scheppach HMS860 and HMS1080 machines and the Leman LODRA260.
A damaged crank can make adjustments difficult or prevent the relevant mechanism from operating normally.
Before replacing it, check whether the problem is caused by a seized shaft, a loose component or another mechanical fault.
Surface planing and thicknessing produce significant quantities of wood shavings.
A dust extraction outlet in good condition allows the machine to be connected to its designated chip extraction system.
Our selection includes a dust extraction outlet compatible with the Bernardo PT250 and selected Scheppach HMS860 and HMS1080 machines.
A broken or incorrectly secured extraction outlet can reduce the efficiency of chip removal.
It is important to use a suitable extraction system and regularly check that the ducts are not obstructed.
Efficient chip removal helps prevent shavings from accumulating inside the machine and contributes to appropriate working conditions.
A spare part for the Bernardo PT250 planer thicknesser should be replaced when wear or damage may affect the machine's correct operation.
The symptoms vary depending on the component concerned:
Worn drive belt: slipping, vibrations or loss of power.
Damaged pulley: mechanical noise or abnormal belt wear.
Worn feed roller: irregular timber feeding.
Worn chain or sprocket: problems with the feed transmission.
Broken spring: malfunction of a tensioning or return mechanism.
Defective switch: difficulties starting the machine.
Damaged cutterblock guard: inability to operate the machine under appropriate safety conditions.
These symptoms may have several possible causes. Accurate diagnosis is therefore essential before ordering a replacement component.
Certain Bernardo PT250 spare parts are also used on other compact planer thicknessers.
Depending on the part reference, compatibility may include selected Scheppach HMS850, HMS860, HMS1070 and HMS1080 machines.
Some components may also be suitable for machines from Kity, Woodstar, Leman and Zipper.
However, machines may differ according to their manufacturing year, serial number or mechanical configuration.
It is therefore important not to assume that all components are interchangeable.
For belts, check the profile and dimensions. For mechanical components, inspect the mounting arrangements and the references shown in the exploded parts diagrams.
Compatibility must always be confirmed for each individual part.
Regular maintenance helps preserve the performance of your Bernardo PT250 planer thicknesser and reduces the risk of breakdowns.
We recommend the following checks:
Inspect the drive belts for cracks, deformation and signs of slipping.
Check the pulleys and sprockets for abnormal wear.
Monitor the feed rollers to maintain regular timber feeding.
Clean the surface planing and thicknessing tables to remove resin deposits.
Inspect the planer knives and sharpen or replace them when necessary.
Remove wood shavings regularly to prevent accumulation inside the mechanisms.
Check guards and safety devices before each use.
Respect the machine's working capacity by adjusting the depth of cut according to the width and hardness of the timber.
A drive belt that is excessively tight may place unnecessary stress on the bearings, while insufficient tension may cause slipping.
Similarly, blunt planer knives or an excessive depth of cut can make the machine appear to lack power.
Before carrying out any maintenance, cleaning or spare part replacement, the machine must be switched off and disconnected from the electrical supply.
All work must be performed in accordance with the manufacturer's instructions.
When ordering a replacement part for the Bernardo PT250, it is essential to identify the required component accurately.
We recommend checking the reference marked on the original part or consulting the machine's exploded parts diagram.
For drive belts, check the dimensions, profile and number of ribs.
For pulleys, chains, sprockets and rollers, the dimensions and mounting systems must be verified.
For electrical components, it is also important to consider the technical specifications and wiring arrangement.
These precautions help reduce ordering errors and make machine repairs easier.
At Probois Machinoutils, we offer a range of drive belts and spare parts for the Bernardo PT250 planer thicknesser to help you maintain and repair your woodworking machine.
Our selection includes Poly-V belts, transmission pulleys, rubber-coated feed rollers, drive chains, sprockets, springs, switches, adjustment hand cranks, bridge-type cutterblock guards and dust extraction outlets.
Certain references are also compatible with other planer thicknessers from Scheppach, Kity, Woodstar, Leman and Zipper, depending on the model.
Our catalogue evolves according to product availability and customer requirements.
If you are looking for a component that is not currently listed in this category, please contact us with the exact machine model and, whenever possible, the reference or position number shown in its exploded parts diagram.
Discover our selection of Bernardo PT250 drive belts and spare parts to repair your planer thicknesser, replace worn components and extend the service life of your woodworking machine.
