M8x10 MM blade locking screw with hexagon head and 12 mm wrench for Holzmann and Bernardo thicknesser, planer and woodworking combination
704 mm Chain for Holzmann and Bernardo Jointed Planer and Combination Wood as listed below
608 mm chain for Holzmann and Bernardo planer and jointer as listed below
Trapezoidal belt for jointer, planer and woodworking combination according to the list below
Special wire capacitor for machine start-up, power 100µf, 275VAC
Motor 230V for the planer thicknesser Bernardo ADH250 and Holzmann HOB260ECO
Exit roller for planer jointer Holzmann HOB260ECO and Bernardo ADH250P
Suction housing outlet for the planer thicknesser Bernardo ADH250 and Holzmann HOB260ECO
Cover plate reference 35 for Bernardo ADH250 and Holzmann HOB260ECO thicknesser planer
Up and down handwheel of the Holzmann HOB260ECO(SMW2) planer
Single-phase switch with emergency stop point DKLD 15A-250V or CK21
Handle reference 3 of view LT02 for Holzmann HOB260ECO and HOB260ECOSMW2 planer and thicknesser
Original Holzmann Ø12 mm feed roller compatible with Holzmann HOB260ECO jointer planers manufactured up to May 2019 only. This part ensures proper wood feeding during the planing operation. ⚠️ Specific version with Ø12 mm shaft – compatibility must be checked carefully before ordering.
Discover our selection of spare parts for the Holzmann HOB260ECO planer thicknesser, designed for maintenance, troubleshooting and the replacement of worn or damaged components on your woodworking machine.
The Holzmann HOB260ECO combines two essential woodworking functions: surface planing, which produces a flat surface and a reference edge, and thicknessing, which brings wooden workpieces to the required thickness.
Over time, certain mechanical and electrical components may wear out or develop faults. These include drive belts, chains, feed rollers, capacitors, switches and adjustment mechanisms.
At Probois Machinoutils, we offer a range of replacement parts to help you repair your Holzmann HOB260ECO without necessarily having to replace the entire machine.
Our selection includes a replacement motor, drive chains, a V-belt, capacitors, rollers, protective components and various mechanical accessories.
The electric motor provides the power required to operate the planer thicknesser.
Our category includes a 230 V replacement motor for the Holzmann HOB260ECO and Bernardo ADH250.
This component may be required when the original motor has a confirmed fault and repairing its associated components is not sufficient.
However, a motor that no longer starts is not necessarily defective.
Before ordering a complete motor, it is important to investigate the possible causes of the malfunction:
Faulty electrical power supply.
Defective switch.
Faulty capacitor.
Blocked transmission system.
Internal electrical fault in the motor.
Motor replacement should only be considered after an appropriate diagnosis.
Always check the 230 V supply voltage, motor specifications and compatibility with the exact version of your machine.
Electrical work must be carried out by a qualified person.
The V-belt transmits movement between the pulleys in the drive system.
Our selection includes a V-belt for planer thicknessers and combination woodworking machines, offered for the models listed in its compatibility information.
A belt in good condition helps ensure smooth and consistent power transmission.
Over time, it may deteriorate due to use, mechanical stress or a fault affecting associated components.
Signs that may indicate the need for replacement include:
Cracks or splits.
Significant wear on the belt sides.
Fraying.
Slipping during operation.
Breakage.
Irregular transmission of movement.
Before replacing the belt, also check the condition of the pulleys and make sure there is no mechanical obstruction.
A new belt fitted to a damaged pulley may wear prematurely.
The belt must match the exact profile and dimensions specified for your version of the Holzmann HOB260ECO.
Drive chains transfer movement between mechanical components fitted with sprockets.
Our category includes a 704 mm drive chain, offered for several Holzmann and Bernardo planer thicknessers and combination woodworking machines.
A chain must have the correct length and specifications for the mechanism in which it is installed.
It may need replacing if it shows signs of wear, excessive elongation, damaged links or breakage.
A chain that does not run smoothly may also indicate a problem with the associated sprockets.
Before ordering, check that the 704 mm chain matches the one fitted to your machine.
It is important not to confuse it with the other chains available in this category.
We also offer a 608 mm drive chain, intended for the machines listed in its compatibility information.
This chain is different from the 704 mm version.
The two references must not be considered interchangeable.
Before ordering, check the length of the original chain and the information provided on your planer thicknesser's exploded parts diagram.
A worn or damaged chain may cause irregular transmission of movement.
Possible symptoms include:
Broken or deformed links.
Stiff sections in the chain.
Excessive elongation.
Unusual noises.
Irregular operation of the mechanism.
When replacing the chain, also check the condition of the sprockets and other transmission components.
Replacing the chain alone will not necessarily solve a problem caused by a blocked mechanism or a damaged sprocket.
The feed roller plays an essential role in moving wood through the machine during thicknessing operations.
It helps feed the workpiece smoothly towards the cutterblock.
Our selection includes an original Holzmann feed roller with a 12 mm diameter shaft, intended exclusively for Holzmann HOB260ECO planer thicknessers manufactured up to May 2019.
This detail is particularly important.
This roller corresponds to a specific version fitted with a Ø12 mm shaft. It must not be ordered for a machine manufactured during another period without checking compatibility.
Before ordering, check:
The exact model of your machine.
Its manufacturing date.
Its serial number.
The shaft diameter of the original roller.
The information provided in the list of compatible machines.
A feed roller may need replacing if it is worn, damaged or no longer performs its function correctly.
However, if the wood no longer feeds through the machine, the transmission components should also be inspected before concluding that the roller is defective.
The outfeed roller helps move the wood after it has passed the cutterblock.
Our selection includes an outfeed roller for the Holzmann HOB260ECO and Bernardo ADH250P.
This component must retain a surface and specifications suitable for its function.
A damaged roller may contribute to irregular wood feeding.
It is important to distinguish the infeed roller at the entrance to the machine from the outfeed roller.
These components occupy different positions and must not be confused.
Before ordering, check your machine model, its version and the specifications of the original roller.
Visual similarity alone is not sufficient to confirm compatibility.
Wood feeding difficulties can have several causes.
It is therefore preferable to carry out a systematic diagnosis before replacing a component.
In particular, check:
The condition of the infeed roller.
The condition of the outfeed roller.
The drive chains.
The belt.
The sprockets and associated mechanical components.
The settings specified by the manufacturer.
The cleanliness of the surfaces over which the wood travels.
A roller that no longer rotates is not necessarily defective.
The problem may originate from a broken chain, a damaged belt or a blocked mechanism.
Conversely, a functioning transmission does not guarantee correct feeding if the roller surface is severely worn.
A thorough inspection helps identify the cause of the fault and replace only the necessary parts.
Our category includes a 100 µF 275 VAC wired capacitor, offered for starting certain machines.
A starting capacitor plays a role in the motor's electrical operation according to the configuration specified by the manufacturer.
When a motor has difficulty starting, a faulty capacitor may be one of the possible causes.
Symptoms may include a motor that struggles to start or produces a humming noise without starting properly.
However, these symptoms alone are not sufficient to confirm that the capacitor is responsible for the fault.
A power supply problem, mechanical obstruction or another electrical fault may cause similar behaviour.
Before ordering, always check the specifications of the original capacitor.
The 100 µF capacitance and 275 VAC rated voltage must match the specifications required for the exact version of your machine.
Never replace a capacitor with a model that has different specifications without appropriate technical validation.
Our selection also includes a 25 µF wired capacitor, offered for the machines listed on its product page.
This capacitor is different from the 100 µF version.
The two references are not interchangeable.
The correct capacitor depends on the machine's electrical configuration and the motor specifications.
Before ordering, record the information printed on the original component:
Capacitance in microfarads (µF).
Rated voltage.
Capacitor type.
Connection method.
Dimensions and mounting system, where necessary.
Warning: A capacitor may retain an electrical charge even after the power supply has been disconnected. Inspection and replacement must be carried out by a qualified person.
Do not attempt to force a motor to start if it is behaving abnormally.
The switch controls the machine's electrical power supply.
Our selection includes a single-phase switch with 4 pins plus an earth connection, fitted with an emergency stop device, type DKLD 15A-250V or CK21.
It is essential to check the exact configuration of the original switch before ordering.
The specifications to verify include:
Number of pins.
Arrangement of the connections.
Presence of an earth connection.
Rated voltage.
Rated current.
Housing type and dimensions.
Configuration of the stop device.
Two switches that look similar externally may have different connections.
Never install an incompatible switch or bypass any of the machine's safety devices.
Replacement must be carried out by a qualified person in accordance with the electrical diagram and the manufacturer's instructions.
Securely holding the planer blades in place is essential for safe machine operation.
Our selection includes an M8 × 10 mm blade clamping screw with a hexagonal head for a 12 mm spanner, offered for several Holzmann and Bernardo planer thicknessers and combination woodworking machines.
This screw contributes to securing the blade clamping components, depending on the design of the cutterblock.
A screw with a damaged head, deteriorated thread or deformation may compromise the quality of the clamping.
Before ordering, check the specifications of the original screw and its compatibility with your machine.
Never use a screw with unsuitable dimensions or specifications to secure the planer blades.
Any work on the cutterblock must be carried out with the machine unplugged, strictly following the manufacturer's installation and adjustment instructions.
Do not use the machine unless the blades are securely clamped.
The cutterblock guard is one of the protective components associated with surface planing operations.
Our category includes a cutterblock guard, position 35, offered for the Holzmann HOB260ECO and Bernardo ADH250 machines listed on its product page.
This component helps limit exposure to the cutting area in accordance with the machine's design.
A broken or deformed guard, or one whose mechanism no longer works correctly, must be inspected before the machine is used again.
It is essential to match the shape, dimensions and mounting system of the original component.
Never use the planer if its cutterblock guard is missing, damaged or ineffective.
Replacement must be carried out in accordance with the manufacturer's instructions.
Chip extraction is an important part of operating a planer thicknesser.
Our selection includes a chip collector outlet for the Holzmann HOB260ECO and Bernardo ADH250.
This component helps direct wood chips towards the collection or dust extraction system, depending on the machine's configuration.
A cracked, broken or deformed collector outlet may obstruct chip removal or make it difficult to connect the extraction system.
Before ordering, check the component's shape, mounting system and compatibility with your model.
It is also important to inspect the extraction system and remove accumulated wood chips in accordance with the manufacturer's recommendations.
The adjustment handwheel operates the mechanism used to raise and lower the thicknessing table.
Our selection includes a table height adjustment handwheel for the Holzmann HOB260ECO(SMW2).
This version information must be taken into account before ordering.
A broken or cracked handwheel, or one with a damaged mounting system, may make height adjustment difficult.
However, if the raising or lowering mechanism is blocked, replacing the handwheel alone will not necessarily solve the problem.
The cause of the resistance should be identified and the associated mechanical components inspected.
Do not force a handwheel that offers abnormal resistance.
Always check that your machine corresponds to the HOB260ECO SMW2 version specified on the product page.
Our category includes a handle, position 3 on diagram LT02, offered for the Holzmann HOB260ECO and HOB260ECOSMW2 planer thicknessers.
This handle is an operating or handling component associated with the mechanism in which it is installed.
A broken or deformed handle, or one with a damaged mounting system, may make operation difficult.
Before ordering, identify the part precisely on diagram LT02 and check position 3.
A handle that looks similar to one fitted to another machine is not necessarily compatible.
Also inspect the condition of the associated mechanism before reassembly.
Several components offered in this category are also intended for certain Bernardo ADH250 or ADH250P models.
Depending on the information provided on each product page, these include the replacement motor, outfeed roller, chip collector outlet and cutterblock guard.
However, this does not mean that all parts used on the two machines are identical.
References may differ depending on the model, version and manufacturing period.
A part compatible with the Holzmann HOB260ECO is not automatically compatible with every version of the Bernardo ADH250, and vice versa.
It is therefore essential to check the list of compatible machines for each product.
This precaution is particularly important for motors, electrical components, rollers and protective devices.
Spare part compatibility may depend on the exact machine version and its manufacturing date.
Certain components in this category are associated with specific configurations.
For example:
The feed roller with a Ø12 mm shaft is intended exclusively for HOB260ECO machines manufactured up to May 2019.
The table height adjustment handwheel is specified for the HOB260ECO SMW2 version.
Certain parts are offered for several Holzmann and Bernardo models, but only according to their individual compatibility lists.
These distinctions must be respected.
The fact that HOB260ECO appears in a product listing does not necessarily mean that every version of the machine uses the same part.
The manufacturing date, serial number and specifications of the original component may be essential for identifying the correct replacement.
To avoid ordering mistakes, start by recording the information on your machine's identification plate.
You should also obtain the exploded parts diagram corresponding to your model.
Useful information includes:
The exact brand and model: Holzmann HOB260ECO.
The machine version, particularly HOB260ECO SMW2 where applicable.
The serial number.
The month and year of manufacture.
The part's position number on the exploded diagram.
The manufacturer's reference, where available.
The dimensions and specifications of the original component.
For a chain, check its length and installation position.
For a roller, check the shaft diameter and manufacturing period.
For a capacitor, record its capacitance, rated voltage and type.
For a switch, check the number and arrangement of pins and its electrical specifications.
For a motor, check the supply voltage and the specifications of the original model.
IMPORTANT: BEFORE PURCHASING, always check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also verify the month and year of manufacture and your machine's serial number.
Regular maintenance helps identify certain signs of wear before they cause a more serious breakdown.
With the machine unplugged and in accordance with the manufacturer's instructions, periodically inspect accessible components.
Pay particular attention to the condition of belts, chains, feed rollers and adjustment devices.
Remove wood chips and accumulated dust using the maintenance methods recommended by the manufacturer.
Watch for unusual noises, vibrations, starting difficulties and problems feeding wood.
A change in the machine's behaviour may indicate that a component needs inspecting.
Do not continue using the machine if a mechanical, electrical or safety-related fault is suspected.
Early intervention may prevent a damaged part from causing further damage to other components.
A localised fault does not always require replacing the entire planer thicknesser.
A broken belt, worn chain, damaged roller, deteriorated handle or faulty capacitor can be replaced individually when a compatible spare part is available.
However, identifying the underlying cause is essential.
A broken chain may indicate a blocked mechanism.
A belt that wears prematurely may be associated with a damaged pulley.
A motor that does not start may have a fault in an associated component without the motor itself being defective.
Replacing the visibly damaged component must therefore not conceal a more serious problem.
An appropriate repair allows you to retain components that are still functional and extend the service life of your woodworking machine.
At Probois Machinoutils, discover our selection of spare parts for the Holzmann HOB260ECO planer thicknesser to maintain your machine and replace worn or damaged components.
Explore our 230 V motor, drive chains, V-belt, capacitors, rollers, switch, cutterblock guard, chip collector outlet and adjustment accessories.
Each part must be selected according to the exact version of your machine and the compatibility information provided on its product page.
Looking for a part that is not included in our selection?
Send us your machine's exact model, serial number, manufacturing date and, if possible, the component's position number on the exploded parts diagram.
A photograph of the original part and the machine's identification plate may also help us identify it.
Order your Holzmann HOB260ECO spare parts from Probois Machinoutils to maintain your planer thicknesser, carry out an appropriate repair and extend the service life of your machine.
