Outer flange Ø45/Ø16x5 mm for Scheppach, Woodster, Parkside, Dexter and Manupro radial miter saws
Inner flange for Scheppach, Woodster, Dexter, Manupro and Parkside radial miter saws
This reference guide 5901215005 is dedicated to various radial miter saws Scheppach, Woodstar, Dexter and Manupro
Screw for radial miter saw Scheppach, Parkside, Kity and Dexter
This locking lever with spring reference 5801207001 is dedicated to various radial miter saws Scheppach, Woodstar, Dexter and Manupro
Bag for radial miter saw Scheppach, Parkside, Dexter and Manupro
Table insert reference 5901215010 for radial miter saw Scheppach, Parkside, Dexter and Manupro
Plate with laser reference 5901220016 for Scheppach HM90MP, HM110MP and Dexter radial miter saw
Switch reference 5901220018 for radial miter saw Scheppach HM110MP and Dexter DX254 or DX254TS
Part for blade protector mark 111 for radial miter saw Scheppach HM110MP and Dexter DX254
Blade protector mark 107 for radial miter saw Scheppach HM110MP and Dexter DX254
Carbons reference 5901220010 for radial miter saw Scheppach HM110MP and Dexter DX254
Left stop mark 6 reference 5901220001 for Scheppach HM110MP and Dexter DX254 radial miter saw
Right stop mark 12 reference 5901220002 for Scheppach HM110MP and Dexter DX254 radial miter saw
Press for radial miter saw Scheppach HM90MP, HM110MP and Dexter DX216, DX254 and DX254TS
Complete blade axle with pinion mark 70 and 73 to 77 for radial miter saw Scheppach HM110MP and Dexter DX254, DX254TS
Arming handle reference 5901220003 and marks 40-42-43 for Scheppach HM110MP and Dexter DX254 radial miter saw
Upper handle reference 5901220019 item 133 for Scheppach and Dexter radial miter saw
Lower handle reference 5901220015 mark 120 for Scheppach and Dexter radial miter saw
Armature 5901220007 for radial miter saw Scheppach HM110MP and Dexter DX254
Support for pieces of wood is dedicated to the radial miter saw Scheppach HM254, MST254 and Manupro MPSOR255MM
Guide rod support reference 5901220023 item 49-53 for Scheppach and Dexter radial miter saw
Stator 5901220008 for radial miter saw Scheppach HM110MP and Dexter DX254
20 mm Cap for Carbons reference 5901220010 for radial miter saw Scheppach HM110MP and Dexter DX254
Are you looking for spare parts for your Dexter DX254 sliding mitre saw? At Probois Machinoutils, we offer a selection of replacement components to help maintain, repair and extend the service life of your machine.
The Dexter DX254 mitre saw, sold under the Dexter brand particularly through Leroy Merlin stores, is designed for various woodcutting operations. It allows straight cuts, mitre cuts and bevel cuts for DIY, renovation and woodworking projects.
Equipped with a 254 mm blade, this sliding mitre saw can be used to cut skirting boards, wooden battens, mouldings, boards and various interior fitting components.
Over time, certain mechanical and electrical components may wear out or become damaged. Motor carbon brushes, handles, locking mechanisms, protective devices and motor components may eventually need replacing.
Rather than replacing the entire machine, it may be possible to carry out a targeted repair using a replacement part compatible with the Dexter DX254.
This category includes motor carbon brushes, an armature, a stator, a switch, blade flanges, blade guards, handles, stops, a blade shaft with gear and various guiding and clamping accessories.
A sliding mitre saw contains several mechanical and electrical assemblies that must operate correctly to ensure cutting quality and user safety.
The motor drives the cutting blade, while the guiding system allows the saw head to move. Stops and fences help position wooden workpieces, and protective devices contribute to reducing risks during operation.
Regular maintenance makes it possible to monitor the condition of these components and detect early signs of wear.
It is recommended to periodically check fasteners, handles, locking devices, guards and accessible parts of the guiding system.
Before carrying out any work, the machine must be disconnected from the mains power supply and the blade must have come to a complete stop.
Electrical repairs and work involving safety components should be carried out by a person with the necessary technical skills.
Motor carbon brushes for the Dexter DX254 mitre saw are wear components that help supply electrical current to the motor armature.
Over time, carbon brushes gradually wear down through friction against the commutator.
Severely worn brushes may cause starting difficulties, interruptions during operation or electrical malfunctions.
Our catalogue includes motor carbon brushes, reference 5901220010, offered for the Scheppach HM110MP and Dexter DX254 sliding mitre saws.
We also offer a 20 mm diameter carbon brush cap, designed to hold the corresponding brushes in position. This cap is sold individually.
Before replacing the carbon brushes, it is important to check their condition, dimensions and the state of the commutator. Where specified by the manufacturer, carbon brushes should be replaced as a pair.
Abnormal overheating, excessive sparking or a damaged commutator may indicate a problem requiring further diagnosis.
The armature of a mitre saw is an essential component of its electric motor. It is the rotating part that contributes to converting electrical energy into mechanical movement.
Our selection includes a motor armature, reference 5901220007, offered for the Scheppach HM110MP and Dexter DX254 sliding mitre saws.
A damaged armature can cause various symptoms, including starting difficulties, irregular operation, excessive overheating, unusual smells or significant sparking around the carbon brushes.
However, these symptoms may also be caused by other components, particularly the carbon brushes, switch or stator.
It is therefore recommended to carry out a diagnosis before replacing the armature to ensure that the fault actually comes from this component.
Replacing a motor armature requires mechanical and electrical knowledge. Reassembly must respect the correct positioning of bearings, electrical connections and other motor components.
The motor stator is the stationary part of the electric motor. It works together with the armature to drive the saw blade.
In this category, we offer a stator, reference 5901220008, designed in particular for the Scheppach HM110MP and Dexter DX254 sliding mitre saws.
A stator failure may cause poor motor operation, loss of power, unusual overheating or an inability to start.
Before ordering a replacement stator, it is important to check the overall condition of the motor and determine the exact cause of the malfunction.
This component should be replaced by a qualified person who can inspect the electrical connections and ensure proper reassembly.
The switch of a sliding mitre saw controls the starting and stopping of the motor.
Subjected to repeated use, this component may eventually show signs of wear or malfunction.
Our catalogue includes a switch, reference 5901220018, offered for the Scheppach HM110MP and Dexter DX254 or DX254TS sliding mitre saws.
A defective switch may cause starting difficulties, intermittent interruptions or no response when the switch is activated.
However, these symptoms do not necessarily mean that the switch is faulty. The power supply, motor carbon brushes and other components should also be checked.
Replacing the switch must respect the original wiring and electrical specifications. Modifying the machine's control or safety systems is not recommended.
The blade guard of a mitre saw is an essential safety device designed to limit access to the cutting blade.
A broken, cracked or deformed guard, or one whose mechanism no longer works correctly, must be repaired or replaced before the machine is used again.
We offer a blade guard, part number 107, designed for the Scheppach HM110MP and Dexter DX254 sliding mitre saws.
This category also includes a blade guard component, part number 111, offered for the same models.
These components allow certain parts of the protective system to be replaced once their compatibility with the machine has been confirmed.
After replacement, it is essential to check that the guard moves freely, returns correctly to its protective position and does not touch the blade.
A mitre saw must never be used with a missing, jammed or deliberately disabled blade guard.
The blade shaft of a sliding mitre saw contributes to transmitting movement from the motor to the cutting blade.
It must ensure smooth rotation and allow the blade to be correctly secured.
Our catalogue includes a complete blade shaft with gear, corresponding to part numbers 70 and 73 to 77, offered for the Scheppach HM110MP and Dexter DX254 or DX254TS sliding mitre saws.
A damaged shaft or gear may cause unusual mechanical noises, vibrations or difficulties transmitting movement.
It is important to inspect the condition of other associated components before carrying out a replacement.
Installing this assembly requires compliance with the original specifications and checking that there is no abnormal play after the repair.
Blade flanges help secure the cutting blade to the saw shaft when correctly installed and tightened.
Our selection includes an inner blade flange and an outer blade flange offered for various 216 mm and 254 mm mitre saws from Scheppach, Woodster, Parkside, Dexter and Manupro.
The outer flange has dimensions of approximately Ø45/Ø16 x 5 mm.
A deformed or damaged flange can affect blade positioning and cause vibrations.
Before ordering, check the diameter, bore, thickness and shape of the original component.
Replacing blade flanges must comply with the manufacturer's installation instructions. A component with different dimensions must not be installed.
Stops for sliding mitre saws contribute to positioning and supporting wooden workpieces during cutting operations.
Our catalogue includes a left stop, reference 5901220001, part number 6, as well as a right stop, reference 5901220002, part number 12.
These components are offered for the Scheppach HM110MP and Dexter DX254 sliding mitre saws.
A damaged, deformed or incorrectly secured stop may affect material positioning and compromise cutting accuracy.
Before replacing it, it is recommended to check the dimensions and mounting points of the component.
After installation, the alignment of the stops should be checked to ensure correct positioning of the workpieces.
The cutting fence provides a reference surface against which wooden workpieces can be positioned during sawing. It plays an important role in achieving accurate cuts.
We offer a cutting fence, reference 5901215005, designed for various Scheppach, Woodstar, Dexter and Manupro sliding mitre saws.
A deformed fence or one with damaged mounting points may affect cutting accuracy.
The table insert, located around the blade opening, helps support the material close to the cutting area.
This category includes a table insert, reference 5901215010, offered for various Scheppach, Parkside, Dexter and Manupro sliding mitre saws.
A cracked, broken or excessively damaged insert should be replaced when it no longer performs its intended function.
Before ordering these components, it is essential to check their shape, dimensions and compatibility with the exact machine version.
The handles of a sliding mitre saw allow the cutting head to be operated and help control its movements.
Our selection includes an operating handle, reference 5901220003, corresponding to part numbers 40, 42 and 43, offered for the Scheppach HM110MP and Dexter DX254 sliding mitre saws.
We also offer an upper handle, reference 5901220019, part number 133, and a lower handle, reference 5901220015, part number 120, designed for certain Scheppach and Dexter mitre saws.
A cracked, broken or excessively loose handle may make the machine difficult or unsafe to operate.
It is important to check the references and mounting points before ordering a replacement handle.
The locking lever is designed to hold certain adjustments or moving components of the saw in a specific position.
This category includes a locking lever with spring, reference 5801207001, offered for various Scheppach, Woodstar, Dexter and Manupro sliding mitre saws.
A damaged lever or one whose spring no longer works correctly may prevent the relevant mechanism from locking properly.
Before replacing it, it is important to inspect the condition of the other associated components.
After installation, the locking mechanism must be checked before the machine is returned to service.
The laser guidance system of a mitre saw helps position the material before cutting.
It projects a cutting reference onto the workpiece and facilitates certain operations requiring accurate positioning.
Our catalogue includes a laser circuit board, reference 5901220016, offered for various Scheppach HM90MP, HM110MP and Dexter sliding mitre saws.
When a laser stops working, the fault may come from the module, its power supply or the electrical connections.
It is therefore advisable to carry out a diagnosis before replacing the circuit board.
After installation, the laser position must be checked and adjusted if necessary according to the manufacturer's instructions.
The workpiece clamp for a mitre saw helps secure wooden workpieces during cutting operations.
We offer a clamp compatible with certain Scheppach HM90MP, HM110MP and Dexter DX216, DX254 and DX254TS sliding mitre saws.
A bent clamp or one whose tightening mechanism no longer works correctly may need replacing.
Our selection also includes a set of two workpiece supports offered for certain Scheppach, Manupro and Dexter sliding mitre saws.
These accessories help support long workpieces and contribute to improved working comfort.
A guide rod support, reference 5901220023, corresponding to part numbers 49 to 53 and designed for a 25 mm diameter rod, is also included in this category.
Before ordering, check the dimensions and mounting systems of the accessories.
The dust collection bag collects some of the sawdust produced during woodcutting operations.
Our catalogue includes a bag offered for various Scheppach, Parkside, Dexter and Manupro sliding mitre saws.
A torn or damaged bag, or one whose attachment no longer fits securely, may need replacing.
Before ordering, it is important to check the connection diameter and attachment system.
For work generating significant amounts of fine dust, the use of a suitable dust extraction system remains recommended.
Certain mitre saws sold under different brands may share similar mechanical or electrical components.
The Dexter DX254 notably shares several spare part references with the Scheppach HM110MP.
This applies in particular to certain motor carbon brushes, the armature, stator, switch, stops, blade shaft and several protective components.
This correspondence can make it easier to find replacement parts when original components are no longer available under the Dexter brand.
However, it is essential to systematically check the references and specifications of each component.
Two machines with a similar appearance may have differences depending on their production version. Visual similarity therefore does not guarantee complete compatibility.
Before ordering a spare part for the Dexter DX254 mitre saw, it is recommended to check the information displayed on your machine's identification plate.
To reduce the risk of ordering an incorrect component, several checks are recommended:
Electrical components, blade mounting systems and safety devices require particular attention.
If you are unsure, a photograph of the part to be replaced and the machine's identification plate may help with identification.
Replacing a defective component can be an economical solution when the machine is otherwise in good working condition.
Changing worn motor carbon brushes, a faulty switch, a broken handle or a damaged blade guard can help extend the service life of your equipment.
Repairing equipment also helps prevent premature machine replacement and can reduce the amount of electrical and mechanical waste generated.
However, it is important to check the overall condition of the saw and assess whether repairing it is appropriate.
A machine with significant structural damage or defective safety devices must not be used until suitable repairs have been completed.
As a specialist in woodworking machinery, tools and spare parts, Probois Machinoutils supports both private users and professionals in maintaining and repairing their equipment.
Our category dedicated to the Dexter DX254 sliding mitre saw includes a selection of replacement components: motor carbon brushes, armature, stator, switch, blade guards, blade flanges, blade shaft with gear, stops, handles, table inserts, laser components and clamping accessories.
Each product page provides the available specifications and compatibility information to help you select the correct component for your machine.
If you cannot find the reference you need, you can contact our customer service team with the exact model of your saw and, if possible, a photograph of the part to be replaced.
Explore our selection of spare parts for Dexter DX254 sliding mitre saws to carry out necessary maintenance, repair your equipment and continue your woodworking, DIY and interior fitting projects.
