Washer reference 3911201069 for lawn mower Scheppach and Woodster
Washer reference 3911201069 for lawn mower Scheppach and Woodster
Washer reference 3911201069 for lawn mower Scheppach and Woodster
Advance lever for lawn mower Scheppach and Woodster
Brake lever reference 3911201002 for Scheppach and Woodster lawn mower
Screw reference 5911203019 for blade of lawn mower Scheppach and Woodster
Front wheel reference 5911213005 for Scheppach and Woodster lawn mowers
Handle D13 for Scheppach and Woodster lawn mowers
M8 nut reference 3911201011 for Scheppach and Woodster lawn mowers
Connection located above the bell of your mower and allowing the cleaning of your Scheppach and Woodster lawn mower!
Handlebar locking lever reference 3911201009 for Scheppach and Woodster lawn mowers
Cable reference 5911201001 for Scheppach and Woodster lawn mowers
Cable 1540 mm reference 5911204019 for Scheppach and Woodster lawn mowers
Mulching hood reference 5911203020 for Scheppach and Woodster lawn mowers
Blade reference 7911200603 for Scheppach lawn mowers
Blade holder reference 5911203018 for lawn mowers Scheppach and Woodster
Rear wheel reference 5911215008 for Scheppach and Woodster lawn mowers
Grass catcher basket for Scheppach and Woodster lawn mowers
Left sprocket reference 5911203007 for Scheppach MS173-51E, MS750-51, MS196-51E and Woodster TT173-51E mowers
Right gear reference 5911203008 for Scheppach MS173-51E, MS750-51, MS196-51E and Woodster TT173-51E mowers
Upper handle ref. 3911201006 for Scheppach and Woodstar lawn mowers according to the following list: COMPATIBLE MACHINES LIST
The Scheppach MS500-46 is a petrol lawn mower that has been widely sold and can still be found working in many gardens today. Like any machine that is used regularly, it will naturally need a few replacement parts over time: blade, drive belt, blade holder, cable, wheel, control lever or grass catcher component.
And a lawn mower that already has several mowing seasons behind it does not necessarily need replacing! If the machine is still in good overall condition, replacing the part that is actually worn is often the simplest and most economical solution.
This category therefore brings together the main spare parts for Scheppach MS500-46 lawn mowers, helping you maintain your machine, carry out repairs and extend its working life.
During regular mowing, some components are subjected to much more wear than others. The drive belt works whenever the self-propelled system is engaged, the wheels travel over sometimes uneven ground, the cables are constantly operated and the blade may encounter stones, branches or roots.
It is therefore perfectly normal to replace certain components after several years.
For the Scheppach MS500-46, you can find various replacement parts such as:
Lawn mower blade.
Blade holder.
Blade fixing bolt.
Drive belt.
Control cables.
Front wheel.
Rear wheel.
Drive lever.
Brake lever.
Knobs and fixing components.
Grass catcher.
Mulching accessories.
Mower deck cleaning connection.
Washers, nuts and screws.
The aim is to replace only what is actually needed rather than giving up on a machine that can still do its job perfectly well.
Regular maintenance is essential to keep your mower pleasant to use and maintain good cutting performance season after season.
Certain parts deserve particular attention:
The blade and its fixing system.
Drive belt.
Self-propelled drive system.
Bowden cables.
Wheels.
Control levers.
Grass catcher.
Various fixing components.
A component that is beginning to wear does not always cause an immediate breakdown. A belt may start slipping, a cable may gradually become harder to operate or a wheel may develop excessive play.
Spotting these signs early can often allow a simple repair before the lawn mower becomes completely unusable.
The blade is one of the most important components of your lawn mower, as it directly determines the quality of the cut.
Over time, it naturally becomes blunt. It may also be damaged by impacts with stones, roots or other objects hidden in the grass.
A blade in poor condition can cause:
Uneven cutting.
Grass being torn rather than cleanly cut.
Abnormal vibration if the blade is bent.
Poorer overall mowing results.
For compatible versions of the Scheppach MS500-46, you can find the lawn mower blade, part number 7911200603.
If the blade has suffered a significant impact, it is also advisable to check its mounting system, particularly the blade holder.
The blade holder provides the connection between the engine drive and the lawn mower blade. It is therefore an important component, especially after the mower has struck a hard object.
For compatible versions of the Scheppach MS500-46, the blade holder, part number 5911203018, may be used.
The blade fixing bolt, part number 5911203019, is also available for fitting the blade.
If your mower has struck a stone, tree stump or another obstacle, simply replacing the blade without inspecting the blade holder may not always be enough. Taking a few minutes to check it can prevent you from fitting a new blade onto an already damaged component.
On a self-propelled lawn mower, the drive belt is an important wear part.
It transmits the movement required by the drive system and works every time the self-propelled function is engaged.
Over time, it can:
Stretch.
Crack.
Wear.
Slip.
Eventually break.
For compatible versions of the Scheppach MS500-46, you can find the 660Li V-belt, part number 5911215004.
If the engine runs normally but your lawn mower struggles to move forward or no longer moves at all, the drive belt is one of the first components worth checking.
The self-propelled system does not, of course, rely solely on the drive belt. Several components work together to maintain the correct tension and transmit movement efficiently.
The tension spring, part number 5911204046, is compatible with certain versions of the Scheppach MS500-46.
A stretched, broken or incorrectly positioned spring can affect the operation of the drive system.
When a drive problem occurs, it is therefore better to inspect the complete mechanism rather than automatically replacing the first component that appears worn.
Cables may be small components, but they play an essential role in the everyday operation of your lawn mower.
They are used every time you operate the controls and, after several years, they may wear, fray, become difficult to operate or eventually break.
For compatible versions of the MS500-46, different cables are available, including:
Cable, part number 5911201001.
1540 mm cable, part number 5911204019.
Before replacing a cable, it is important to compare its length, end fittings and, above all, its part number with the component fitted to your machine.
A cable that looks almost identical to yours is not necessarily the right one: a small difference in length or fitting can be enough to prevent correct installation.
The wheels are among the components directly exposed to ground conditions.
Holes, stones, kerbs, hard surfaces and moisture naturally take their toll over the years.
Different replacement wheels for the Scheppach MS500-46 may be available depending on the version of your machine.
A worn wheel can make the mower less comfortable to manoeuvre, create excessive play or affect the drive system when the wheel is involved in self-propulsion.
There is therefore no need to wait until a wheel is completely broken before considering replacement.
The controls on the handlebar are constantly used while mowing.
The drive lever operates the self-propelled system, while the brake lever plays an important role in the operation and safety of the machine.
These components can become damaged after a fall, impact or simply after many years of regular use.
Various levers, knobs, nuts and fixing components are available, allowing individual controls to be repaired without replacing complete assemblies.
Sometimes it is the smallest and simplest part that puts a mower out of action. And when the grass is growing quickly in spring, you are usually very glad to be able to replace just the part you need!
The grass catcher is constantly removed, emptied and refitted.
Over time, its fabric, frame or fixing points may therefore become worn or damaged.
A replacement grass catcher is available for certain compatible versions of the Scheppach MS500-46.
Replacing this component allows you to retain the grass collection function without having to improvise a temporary repair on a catcher that has become too badly damaged.
Certain versions of this lawn mower can also use a mulching system.
A mulching plug, part number 5911203020, is among the parts available for certain compatible Scheppach lawn mowers.
This type of spare part is particularly useful when the original accessory has been lost or damaged over the years.
Grass can quickly accumulate underneath a lawn mower deck, particularly when mowing slightly damp grass.
Some lawn mowers are therefore equipped with a garden hose connection designed to make cleaning underneath the deck easier.
This small component is also available as a replacement part for various Scheppach lawn mowers.
It may be a simple detail, but keeping the underside of the mower deck clean helps maintain efficient grass discharge and makes general maintenance easier.
A lawn mower is made up of many small components that may seem unimportant until one of them is lost or broken.
Depending on the version, you may therefore find:
Washers.
Nuts.
Screws.
Knobs.
Handlebar locking components.
Small fixing parts.
Being able to order these components individually can often save you from replacing a complete assembly simply because a screw, nut or knob has been damaged.
This is an essential point to check before ordering spare parts.
The model name Scheppach MS500-46 alone is not always enough to guarantee that a part will fit your machine.
Scheppach may have changed certain components during the production period. Differences can exist for some parts depending on whether the lawn mower was manufactured before or after July 2021 or August 2022.
Before ordering, we therefore recommend checking:
The exact model: Scheppach MS500-46.
Serial number.
Production date.
Original part number.
Part number shown on the exploded diagram corresponding to your lawn mower.
This precaution is particularly important for drive belts, blade holders, cables, wheels and other mechanical parts.
This is something we regularly encounter when dealing with spare parts.
You own a Scheppach MS500-46, find a part advertised as compatible with the MS500-46 and naturally assume that it will automatically fit your machine.
Unfortunately, it is not always quite that simple.
Two lawn mowers with exactly the same model name may have been manufactured several years apart. During that time, the manufacturer may have changed a mounting point, cable length, belt dimensions or the design of another component.
That is why checking the part number is so important. It takes just a few extra minutes before ordering but can save a lot of frustration when it is time to fit the replacement part.
When a lawn mower no longer starts, stops driving forward or no longer cuts as well as it used to, it can be tempting to think that the machine is simply getting too old.
However, the cause can sometimes be surprisingly simple: a worn drive belt, broken cable, damaged blade or faulty control component.
If the engine, mower deck and main components are still in good condition, replacing only the faulty part can considerably extend the service life of the machine.
That is exactly the purpose of this Scheppach MS500-46 spare parts category: helping you maintain and repair your equipment for as long as it remains practical to do so.
And there is always something satisfying about seeing a lawn mower you thought was out of action return to the garden after replacing just one small part!
This category brings together various replacement parts for Scheppach MS500-46 lawn mowers, helping you maintain and repair your machine season after season.
Whether you need a blade, blade holder, fixing bolt, 660Li drive belt, tension spring, Bowden cable, wheel, control lever, grass catcher, mulching accessory or small fixing component, always check compatibility with your exact machine version before ordering.
The goal is simple: identify the correct part number, replace only what actually needs replacing and get your Scheppach MS500-46 back to work for many more mowing seasons.