Spare Parts and Drive Belts for Bernardo CWM150 Combination Woodworking Machines

Discover our selection of spare parts for the Bernardo CWM150 combination woodworking machine, designed to help maintain, repair and restore your compact multifunction woodworking equipment.

The Bernardo CWM150 mini combination machine combines several woodworking operations in a single compact unit. Like any combination woodworking machine, it uses various transmission, adjustment and safety mechanisms that require regular maintenance.

Over time, certain components may wear out or become damaged, including drive belts, pulleys, bearings, motors, switches, contactors, guides and protective guards.

At Probois Machinoutils, we offer a selection of replacement components to help extend the service life of your Bernardo CWM150 and maintain reliable operation.

Some references are also listed for Kity K6-154, Scheppach Combi 6 and Woodstar C06 combination machines. However, compatibility must always be checked individually using the product specifications and the exploded parts diagram of your machine.

Drive Belts for Bernardo CWM150 Combination Machines

Drive belts for the Bernardo CWM150 transmit power from the motor to the various working mechanisms of the machine.

They play an essential role in the operation of the sawing, planing, thicknessing and spindle moulding functions.

Our catalogue includes several belt references used on these compact combination machines:

• 483J3 belt for the saw mechanism.

• 406J4 belt for the circular saw.

• 584J3 belt for the thicknessing mechanism.

• 660J4 belt for the surface planing mechanism.

• 660 x 15 mm flat belt for the spindle moulding function.

These references correspond to different applications. Always check the original belt and the configuration of your machine before ordering.

A worn, loose or damaged belt can cause power transmission problems, unusual noises or difficulties driving the machine's working components.

A belt showing cracks, fraying or significant deformation should be replaced.

Motors, Pulleys and Bearings for Combination Woodworking Machines

The Bernardo CWM150 motor supplies the power required to drive the machine's various mechanisms.

A faulty motor may cause starting difficulties, loss of power, overheating or complete machine failure.

Our selection includes a replacement motor listed as compatible with several compact combination woodworking machines, including the Bernardo CWM150, subject to verification against the exploded parts diagram.

Pulleys for combination woodworking machines transfer rotational movement through the drive belts. A worn or damaged pulley may cause misalignment, vibration and premature belt wear.

Bearings and bearing housings ensure smooth rotation and correct support of the machine's shafts.

A damaged bearing may produce rumbling noises, excessive play or abnormal heat.

Before replacing a motor, pulley or bearing, always check the dimensions, part references and technical specifications of the original component.

Spare Parts for the Planer and Thicknesser Functions

The planer and thicknesser functions of the Bernardo CWM150 require correctly operating mechanical components to ensure smooth and consistent timber feeding.

Several components are involved in these operations, including drive belts, shafts, bearings, feed rollers and transmission chains.

Our category includes various mechanical components for compact combination machines, such as thicknesser feed rollers, chains, shafts and bearing supports.

Wear affecting these parts may cause irregular timber feeding, mechanical noises or inconsistent machine operation.

It is important to inspect the mechanisms and identify the actual cause of a malfunction before replacing a component.

Poor timber feeding is not necessarily caused by a defective feed roller. It may also result from a transmission problem, incorrect adjustment or insufficient maintenance.

Circular Saw Spare Parts for Bernardo CWM150

The circular saw function requires efficient power transmission and properly maintained guiding and safety devices.

Among the circular saw spare parts for combination machines, you may find drive belts, pulleys, shafts, table inserts and riving knives, depending on model compatibility.

The saw table insert provides a suitable opening around the blade at table level.

The riving knife helps reduce the risk of timber pinching behind the saw blade and causing kickback.

These safety components must be suitable for the saw's configuration and correctly installed.

Any missing, bent or damaged protective component must be replaced before the machine is used again.

Guides, Guards and Accessories for Bernardo CWM150

Guides and accessories for the Bernardo CWM150 combination machine contribute to accurate adjustments and safer woodworking operations.

Our catalogue includes various components such as:

• Rip fences and guide rails.

• Spindle moulder guards.

• Handles and locking mechanisms.

• Hold-down devices and clamping components.

• Selector rods and adjustment components.

• Screws, fasteners and other mechanical parts.

A damaged or incorrectly secured fence may affect machining accuracy.

Similarly, a worn locking handle may prevent an adjustment from remaining securely in position.

Spindle moulder guards must always be used according to the manufacturer's instructions.

For these components, checking the exact part reference and mounting points is particularly important.

Switches and Contactors for Bernardo CWM150

Electrical spare parts for combination woodworking machines control starting, stopping and certain operating or safety functions.

Our selection includes switches, contactors and selector components intended for different compact combination machines.

A faulty switch may prevent the machine from starting or cause intermittent operation.

However, before replacing an electrical component, the power supply and the actual cause of the fault should be checked.

Replacement parts must have the appropriate electrical and mechanical specifications.

All electrical work must be carried out by a qualified person with the machine disconnected from the power supply. Safety devices must never be bypassed to operate the equipment.

Compatibility with Kity, Scheppach and Woodstar Combination Machines

Certain Bernardo CWM150 spare parts may also be suitable for other compact combination woodworking machines.

Our catalogue includes references associated with the following models:

• Bernardo CWM150

• Kity K6-154

• Scheppach Combi 6

• Woodstar C06

However, similarities between certain components do not mean that all parts are interchangeable.

Dimensions, mounting arrangements and mechanical configurations may differ depending on the machine and its production version.

Before ordering, consult the relevant product page and compare the reference with the part number shown in your machine's exploded diagram.

How to Identify the Correct Spare Part for Your Combination Machine

To select a replacement part for your Bernardo CWM150, start by accurately identifying the defective component.

We recommend checking:

• The exact brand and model of your machine.

• The information on the identification plate.

• The part number shown in the exploded parts diagram.

• The dimensions of the original component.

• The reference printed on the belt, if still readable.

• The electrical specifications when replacing a motor or contactor.

For a drive belt, its length, profile and number of ribs are essential details.

For a bearing, check the inside diameter, outside diameter and width.

These checks help prevent ordering mistakes and ensure that the selected component is suitable for your machine.

Maintaining and Repairing Your Bernardo CWM150

Regular maintenance helps extend the service life of your Bernardo CWM150 combination woodworking machine.

Clean accessible mechanisms, remove accumulated sawdust and periodically inspect the condition of drive belts and pulleys.

Also watch for unusual noises, vibrations and feeding difficulties.

Bearings, bearing supports and adjustment mechanisms should be inspected according to the manufacturer's recommendations.

Before carrying out maintenance, disconnect the machine from the electrical supply and wait until all rotating parts have stopped completely.

Never operate your combination machine with a missing guard, defective safety device or damaged transmission component.

Find Bernardo CWM150 Spare Parts at Probois Machinoutils

At Probois Machinoutils, we offer a selection of drive belts and spare parts for Bernardo CWM150 combination woodworking machines, along with components that may also be suitable for certain Kity, Scheppach and Woodstar models.

Whether you are looking for a drive belt, motor, pulley, bearing, switch, fence or protective guard, browse the available references in this category.

Cannot find the component needed to repair your machine?

Provide us with the exact model of your combination woodworking machine and, whenever possible, the part number shown in its exploded parts diagram.

This information will help us identify the required component and check whether it can be supplied.

Repairing your Bernardo CWM150 with suitable replacement parts can help extend its service life and avoid replacing the entire machine whenever a repair is possible.