Parts for Dexter MS8 mitre saw

Parts for Dexter MS8 mitre saw - Probois Machinoutils

Active filters

Spare Part for Dexter MS8 Mitre Saw: Maintain and Repair Your Machine

Are you looking for a spare part for your Dexter MS8 mitre saw to repair your machine, replace a worn component or restore its proper operation? At Probois Machinoutils, we offer a selection of replacement parts compatible with the Dexter MS8 mitre saw, including blade flanges, motor carbon brushes, cutting fences, fastening components and safety parts.

The Dexter brand, distributed through retailers including Leroy Merlin, is well known among DIY enthusiasts and woodworking hobbyists. Its power tools are designed for a wide range of cutting, renovation and interior fitting applications.

The Dexter MS8 mitre saw is used to make straight cuts and angled cuts in various wooden components, including skirting boards, battens, mouldings, framing strips and other pieces used in woodworking and interior finishing.

Over time and with repeated use, certain components may become worn, damaged or require replacement. A defective part can affect cutting accuracy, motor operation or user safety.

Finding a suitable replacement part for the Dexter MS8 saw may allow you to restore your machine without having to replace the entire power tool.

Which Spare Parts Are Available for the Dexter MS8 Mitre Saw?

A mitre saw consists of several mechanical and electrical assemblies that contribute to its operation. The motor drives the blade, the flanges secure it, the fence helps position the workpiece and the protective devices contribute to safe operation.

In this category, you can find several types of spare parts for the Dexter MS8 mitre saw:

  • Outer blade flange to help secure the saw blade correctly onto its spindle.
  • Inner blade flange to support the positioning and retention of the blade.
  • Blade fixing screw to fasten the blade according to the manufacturer's assembly specifications.
  • Cutting fence to provide proper support for the workpiece during cutting.
  • Motor carbon brushes to replace worn brushes on a compatible electric motor.
  • Carbon brush caps to secure and protect the motor brush holders.
  • Micro switch to replace a defective electrical component when compatibility has been confirmed.
  • Blade guard to replace a damaged protective component.

These components meet different repair and maintenance needs. Before ordering, it is essential to check the machine reference and the specifications of the original part.

Inner and Outer Blade Flanges for Dexter MS8 Mitre Saw

The blade flanges for the Dexter MS8 mitre saw play an essential role in securing the circular saw blade onto the machine spindle.

The inner flange provides a supporting surface, while the outer flange helps clamp the blade. Together, they hold the blade in the position specified by the manufacturer.

Our selection includes the outer blade flange reference 3901105031 and the inner blade flange reference 3901105033, offered for certain mitre saws using a 210 mm blade, including compatible models from Scheppach, Woodstar, Parkside and Dexter.

A bent, cracked or damaged flange must never be reused. It may compromise blade retention and cause vibration or dangerous operation.

Before replacing a flange, check its dimensions, bore diameter, shape and compatibility with your exact saw model.

Warning: a blade flange is an important safety-related fastening component. Never replace it with an approximate or unsuitable part.

Blade Fixing Screw for Dexter Mitre Saw

The blade fixing screw is essential for correctly securing the circular saw blade to its spindle.

This component is subjected to mechanical stresses during saw operation and blade replacement. Damaged threads, a deteriorated screw head or a bent screw may prevent proper tightening.

In this category, we offer a blade fixing screw intended for certain compatible mitre saws from Dexter, Scheppach, Woodstar, Kity and Parkside.

It is essential to check the thread type, tightening direction and dimensions of the original screw before ordering.

Some mitre saws use specific thread configurations. Never force a screw that does not fit normally.

When replacing the saw blade, always follow the instructions in your machine's manual and use only the fastening components specified for that model.

Motor Carbon Brushes for Dexter MS8 Mitre Saw

The motor carbon brushes for the Dexter MS8 mitre saw are components that may gradually wear during operation on electric motors equipped with brushes.

These brushes provide the electrical contact required for motor operation. Over time, their length decreases due to friction.

Severely worn carbon brushes may cause various problems:

  • The motor no longer starts.
  • Intermittent starting problems.
  • Unusual loss of power.
  • Unexpected interruptions during operation.
  • Abnormal sparking around the motor.

These symptoms may also result from other electrical components. It is therefore important to identify the cause of the fault before replacing the brushes.

Our selection includes a pair of motor carbon brushes intended for various compatible mitre saws from Dexter, Scheppach, Woodstar and Parkside using 210 to 216 mm blades.

The carbon brushes must match the dimensions, shape and connection system of the original components. Compatibility cannot be determined solely by the diameter of the saw blade.

When replacement is necessary, it is generally advisable to replace both brushes at the same time to maintain even wear.

Carbon Brush Caps for Dexter Mitre Saw

Carbon brush caps are complementary components of the motor's electrical system.

They close the carbon brush housings and help retain the components in the configuration specified by the manufacturer.

A cracked, broken or damaged brush cap may prevent the motor carbon brush from being held correctly in place.

This category includes a pair of 16 mm carbon brush caps intended for certain compatible mitre saws from Dexter, Scheppach, Woodstar and Parkside.

Before ordering, compare the diameter, thread and shape of the caps with those fitted to your machine.

An unsuitable carbon brush cap must never be forced into its housing, as this could damage the brush holder or compromise motor operation.

Cutting Fence for Dexter MS8 Mitre Saw

The cutting fence on a Dexter mitre saw helps position the wooden workpiece correctly during sawing operations.

It provides an important supporting surface for making consistent cuts and keeping the workpiece in the intended position.

A bent, broken or incorrectly secured fence may cause poor workpiece positioning and affect cutting quality.

Our category includes a complete cutting fence for certain 210 mm mitre saws from Dexter, Scheppach, Woodstar and Parkside.

Before ordering this component, it is essential to check the fence dimensions, mounting points and exact compatibility with the Dexter MS8 saw.

A correctly installed fence must be securely fastened and must not come into contact with the blade during cutting movements.

After any work on the fence, the saw settings must be checked according to the manufacturer's recommendations.

Micro Switch for Dexter Mitre Saw

The micro switch on a Dexter mitre saw is an electrical component that may be involved in certain control or safety functions of the machine.

When a micro switch becomes defective, it may prevent normal operation or cause intermittent malfunctions.

In this category, you can find the micro switch reference 3901204043, offered for certain compatible mitre saws from Scheppach, Woodstar, Dexter, Kity and Parkside.

Before replacing a micro switch, it is essential to confirm that the fault actually originates from this component.

The replacement must comply with the original electrical specifications, mounting arrangement and wiring connections.

For any work on the saw's electrical components, consult a qualified professional if you do not have the necessary technical knowledge.

Never remove, bypass or disable a safety device in an attempt to restore machine operation.

Blade Guard for Dexter MS8 Mitre Saw

The blade guard is an essential safety component of a mitre saw.

It helps limit exposure to the blade during the different stages of machine operation, according to the protective mechanism designed by the manufacturer.

A cracked, broken, jammed or incorrectly functioning blade guard must be inspected before the machine is used again.

Our selection includes the blade guard reference 3901105035, intended for certain compatible mitre saws from Scheppach, Woodstar, Parkside and Dexter.

Before ordering this part, check the guard's shape, mounting points and compatibility with your saw.

After replacement, the guard must move freely and return to its protective position according to the manufacturer's instructions.

Never operate a mitre saw if its blade guard is missing, damaged or deliberately disabled.

How to Identify the Correct Spare Part for a Dexter MS8

Choosing a spare part for a Dexter MS8 mitre saw requires checking several details to avoid ordering mistakes.

Machines sold under different brands may sometimes share certain components. However, visual similarity alone does not guarantee that parts are interchangeable.

Before ordering, we recommend checking:

  • Brand: Dexter.
  • Exact model: MS8.
  • Manufacturing reference: when indicated on the machine's identification plate.
  • Part reference: if listed in the manual or exploded parts diagram.
  • Dimensions: particularly for flanges, screws, caps and fences.
  • Shape and mounting points: for mechanical components and protective devices.
  • Electrical specifications: for carbon brushes and switches.

It is also important not to confuse the Dexter MS8 with the Dexter MS SL 8, MS SL 8S, MS SL 10 or MS SL 10S models, which may use different components.

Each machine reference must be checked individually before purchasing a replacement part.

How to Maintain Your Dexter MS8 Mitre Saw

Regular maintenance helps preserve the performance and service life of your Dexter MS8 mitre saw.

Wood cutting produces dust and chips that may accumulate around moving components, fences and ventilation openings.

To keep your machine in good condition, several checks can be carried out:

  • Regularly remove accumulated dust and wood chips.
  • Check the condition of the saw blade and its fastening.
  • Check that the blade guard operates correctly.
  • Inspect the cutting fence and its mounting points.
  • Monitor unusual noises and vibrations.
  • Check the condition of the power cable.
  • Inspect motor carbon brushes when recommended by the manufacturer.
  • Check locking mechanisms and safety devices.
  • Follow the recommendations in the user manual.

Before cleaning, adjusting or replacing any component, the saw must be switched off and disconnected from its electrical power supply.

If a safety component is damaged or the machine behaves abnormally, stop using it until the problem has been resolved.

Repair Your Dexter MS8 Mitre Saw Instead of Replacing It

A malfunction or broken component does not necessarily mean that your Dexter MS8 mitre saw must be replaced.

When the problem concerns a replaceable component and the rest of the machine remains in good condition, repairing it may be a worthwhile solution.

Replacing a motor carbon brush, blade flange, cutting fence or another suitable component may help extend the useful life of your equipment.

Repairing a machine offers several advantages: reducing expenses when the repair is economically worthwhile, avoiding premature replacement of a power tool and limiting waste.

However, it is essential to identify the exact cause of the fault and never use an unsuitable component, particularly when it is involved in securing the blade or operating a safety device.

Why Buy Dexter MS8 Mitre Saw Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we offer a selection of spare parts for many DIY and woodworking machines, including products from Dexter, Scheppach, Woodstar, Kity and Parkside.

Our category dedicated to spare parts for the Dexter MS8 mitre saw helps you find components for repairing and maintaining your machine.

You can find blade flanges 3901105031 and 3901105033, motor carbon brushes, carbon brush caps, a cutting fence, a blade fixing screw, the micro switch 3901204043 and the blade guard 3901105035.

The availability of these spare parts may vary depending on stock levels and deliveries from our suppliers.

Before ordering, carefully check the compatibility information provided on each product page to select the correct reference for your machine.

Whether you are looking for a Dexter MS8 spare part, carbon brushes for a Dexter mitre saw, a blade flange or a Dexter blade guard, explore our selection of replacement parts to maintain your saw and extend its service life.