Dexter Vertical Compressor Parts

Dexter Vertical Compressor Parts - Probois Machinoutils

Active filters

Spare Part for Dexter Vertical Air Compressor: Repair and Maintain Your Equipment

Are you looking for a spare part for your Dexter vertical air compressor to repair your equipment, replace a defective component or extend its service life? At Probois Machinoutils, we offer a selection of replacement parts for maintaining and repairing Dexter vertical air compressors, including the DX24V, DX50V, AC50V and AC51V models, depending on the compatibility information provided for each part.

The Dexter brand, distributed through retailers including Leroy Merlin, offers various products for DIY and workshop applications. Its vertical air compressors feature a compact design that helps reduce floor space requirements while providing a supply of compressed air for different tasks.

These compressors can be used for inflation, blowing, cleaning certain surfaces and powering pneumatic accessories suited to their technical specifications.

Over time and with repeated use, certain components may wear out or develop faults. A damaged drive belt, worn motor carbon brushes, a defective pressure regulator or a damaged air pipe can affect the compressor's operation.

Rather than immediately replacing the entire machine, it may be worthwhile finding a compatible replacement part for your Dexter vertical air compressor.

Our catalogue includes motor carbon brushes, drive belts, pressure regulators, air pipes, O-rings and spacers for various Dexter compressor models and compatible machines from Scheppach, Aircase and Woodster.

Which Spare Parts Are Available for Dexter Vertical Air Compressors?

A Dexter vertical air compressor contains several mechanical, electrical and pneumatic assemblies responsible for producing, storing and distributing compressed air.

Each component plays a role in the machine's operation. When a part becomes worn or damaged, replacing it may restore normal operation, provided that the fault has been correctly diagnosed.

In this category, you can find:

  • Motor carbon brushes, reference 5906117015, for certain Scheppach, Dexter and Aircase vertical air compressors.
  • Drive belts for certain compatible Scheppach, Dexter and Aircase vertical air compressors.
  • Pressure regulators for various compressors, including certain Scheppach HC24V and HC50V models.
  • Pressure regulator reference 5906124001 for certain versions of Scheppach vertical compressors.
  • Air pipe reference 3906115016 for Scheppach HC50V and Dexter AC50V and AC51V compressors manufactured from July 2015 onwards.
  • A 33 mm diameter O-ring for certain Scheppach compressors.
  • Spacer reference 5906140019 for various compatible Scheppach and Dexter compressors.
  • Motor carbon brushes for certain Scheppach and Woodster compressors, according to the specified compatible models.

Please note that not all these parts are necessarily compatible with every Dexter vertical air compressor. Always consult the technical specifications and compatibility lists provided on each product page.

Motor Carbon Brushes for Dexter Vertical Compressor: Replace Worn Components

Motor carbon brushes for Dexter vertical air compressors are electrical components used in certain brushed electric motors.

They provide electrical contact with the motor commutator and allow the motor to operate. During use, the brushes rub against the commutator and gradually wear down.

When they become excessively worn, the motor may develop starting difficulties, operate irregularly or stop unexpectedly.

Our catalogue includes a pair of carbon brushes, reference 5906117015, for various Scheppach, Dexter and Aircase vertical compressors.

Several symptoms may indicate that the brushes should be inspected:

  • The compressor motor no longer starts.
  • Starting becomes irregular or intermittent.
  • The motor experiences unusual interruptions.
  • Excessive sparking occurs around the commutator.
  • The brushes are broken, too short or unevenly worn.

These symptoms may also be caused by other electrical components. It is therefore important to identify the source of the fault before ordering new carbon brushes.

Reference 5906117015 must be compared with the original component and the list of compatible machines.

Some compressors use brushless motors. The motor design should therefore be checked before carrying out any maintenance.

Drive Belt for Dexter Vertical Air Compressor: Ensure Proper Power Transmission

The drive belt for Dexter vertical air compressor is a mechanical component used on certain models to transmit movement from the motor to the compression mechanism.

A drive belt in good condition helps ensure smooth and efficient power transmission.

Over time, it may stretch, crack or deteriorate due to mechanical stress and operating hours.

Our selection includes a drive belt for certain compatible Scheppach, Dexter and Aircase vertical air compressors, subject to the compatibility of the specific version.

Several signs may indicate that a belt needs replacing:

  • Visible cracks or splits.
  • Frayed edges or missing sections.
  • Unusual noises during operation.
  • Slipping or irregular transmission.
  • A broken belt or one that has come off its pulleys.

Before ordering, check the dimensions, profile and original reference number of the belt.

Abnormally rapid wear may also indicate an alignment problem, a damaged pulley or another mechanical fault. The cause should be identified before installing a new belt.

Pressure Regulator for Dexter Compressor: Control Outlet Air Pressure

The air compressor pressure regulator is an essential component of the pneumatic circuit. It allows the user to adjust the pressure of the air supplied to accessories connected to the compressor.

Correct pressure adjustment is important for using pneumatic tools according to their technical specifications.

A defective regulator may prevent accurate pressure adjustment or cause irregular outlet pressure.

Our catalogue includes pressure regulators for Scheppach HC24V and HC50V compressors, as well as pressure regulator reference 5906124001, intended for certain versions of Scheppach vertical compressors, depending in particular on their serial numbers.

These parts are listed in this category, but their compatibility with a Dexter compressor must be confirmed before purchase.

A pressure regulator may need replacing when:

  • The outlet pressure can no longer be adjusted correctly.
  • The adjustment knob is damaged.
  • An air leak develops around the regulator.
  • The delivered pressure becomes unstable.
  • An internal mechanical defect has been confirmed.

Before ordering a regulator, check its pressure specifications, connections, dimensions and compatibility with the pneumatic circuit.

The pressure regulator should not be confused with the pressure switch, which controls motor starting and stopping according to the pressure inside the air receiver.

Air Pipe for Dexter AC50V and AC51V Compressors: Replace a Damaged Air Line

The air pipe for Dexter vertical air compressor allows compressed air to circulate between certain components of the machine.

It must withstand the pressure and temperature conditions specified by the manufacturer while maintaining an airtight connection.

Our catalogue includes air pipe reference 3906115016 for Scheppach HC50V compressors and Dexter AC50V and AC51V models manufactured from July 2015 onwards.

This manufacturing date is particularly important, as production changes may result in differences between versions of the same compressor model.

An air pipe may need replacing if it shows:

  • Cracks or perforations.
  • Air leaks around a connection.
  • Significant deformation.
  • Damage caused by heat or vibration.
  • Mechanical wear affecting its airtightness.

Before ordering, check the exact compressor model, manufacturing date and specifications of the original air pipe.

An air pipe designed to carry compressed air must never be replaced with a hose that is not rated for the machine's operating pressures and temperatures.

O-Ring for Air Compressor: Maintain Proper Sealing

Air compressor O-rings are used in various mechanical and pneumatic assemblies to prevent air leaks between mating surfaces.

Depending on their location, they may be exposed to pressure, temperature changes and compression forces.

Over time, an O-ring may harden, flatten, crack or lose its sealing properties.

Our selection includes a 33 mm diameter O-ring for certain Scheppach compressors.

Its presence in this category does not guarantee compatibility with all Dexter vertical compressors.

Before ordering, check the inside diameter, cross-sectional thickness, material and specifications of the relevant fitting.

An incorrectly sized O-ring may cause air leaks or prevent the components from being assembled correctly.

Spacer for Dexter Compressor: Maintain Correct Mechanical Alignment

A compressor spacer is a mechanical component used to maintain a specific distance or position between different parts.

Depending on its location, it may contribute to the alignment of an assembly or maintain the spacing specified by the manufacturer.

Our catalogue includes spacer reference 5906140019 for various compatible Scheppach and Dexter compressors.

A spacer may need replacing if it becomes deformed, cracked, broken or excessively worn.

Before purchasing, compare its reference number, dimensions and position in your compressor's exploded parts diagram.

Installing an unsuitable spacer may alter the alignment or operation of the mechanical components concerned.

How to Identify a Fault on Your Dexter Vertical Air Compressor

A Dexter DX24V, DX50V, AC50V or AC51V vertical air compressor may develop different operating problems over time.

Certain symptoms can help guide the initial checks:

  • The motor no longer starts: check the electrical supply, protective devices and motor components.
  • The motor operates intermittently: investigate electrical problems, overheating or worn carbon brushes if the motor uses them.
  • The compressor no longer builds pressure correctly: check for possible air leaks and inspect the compression mechanism.
  • The outlet pressure can no longer be adjusted: inspect the pressure regulator.
  • An air leak can be heard: inspect pipes, connections and seals after fully depressurising the system.
  • Unusual mechanical noises occur: check transmission components and accessible mechanical parts.
  • The drive belt wears out quickly: investigate alignment problems or mechanical defects.
  • The compressor stops unexpectedly: check operating conditions, protective devices and possible causes of overheating.

These indications are intended as general troubleshooting guidance and do not always identify the faulty component with certainty.

In the event of an electrical fault or a problem involving a pressurised component, it is advisable to consult a qualified professional.

How to Choose a Compatible Spare Part for Your Dexter Vertical Air Compressor

Choosing a spare part for Dexter vertical air compressor requires accurate identification of your equipment.

Dexter compressors may share design similarities with certain Scheppach, Aircase or Woodster machines. However, these similarities do not guarantee that their components are interchangeable.

Before placing an order, we recommend checking:

  • The exact brand and model of your compressor.
  • The reference number shown on the identification plate.
  • The machine's serial number.
  • The month and year of manufacture.
  • The original reference number of the required part.
  • The position number in the exploded parts diagram, when available.
  • The dimensions and technical specifications of the component.
  • The list of compatible models indicated on each product page.

This verification is particularly important for air pipe reference 3906115016, offered for Dexter AC50V and AC51V compressors manufactured from July 2015 onwards.

Likewise, pressure regulators may vary according to the model and serial number, while carbon brushes and drive belts must match the original components.

IMPORTANT: BEFORE ORDERING A SPARE PART, ALWAYS CHECK YOUR DEXTER COMPRESSOR'S EXACT MODEL, MANUFACTURING DATE, SERIAL NUMBER AND THE COMPATIBILITY INFORMATION PROVIDED ON THE PRODUCT PAGE.

Maintain Your Dexter Vertical Air Compressor to Extend Its Service Life

Regular maintenance helps preserve the performance of your Dexter vertical air compressor and reduce premature wear of certain components.

After each use, it is advisable to clean the external surfaces and keep ventilation openings free from dust and debris.

Air pipes and pneumatic connections should be inspected periodically to detect possible leaks or damage.

The pressure regulator should allow normal adjustment of the outlet pressure, while measuring instruments should remain readable and functional.

On models equipped with motor carbon brushes, their condition may require periodic inspection according to the manufacturer's recommendations.

If the compressor uses a drive belt, its condition should be monitored and any abnormal wear investigated.

The air intake filter, when fitted, should also be maintained according to the manufacturer's recommendations to limit dust accumulation inside the compression system.

For models equipped with an air receiver, condensate drainage and inspection procedures should be carried out according to the manufacturer's instructions.

It is also important to respect the machine's specified duty cycle to prevent overheating and excessive motor stress.

Before carrying out any maintenance or repair, completely disconnect the compressor from its electrical supply, allow it to cool down and fully depressurise the system according to the manufacturer's instructions.

Safety devices and pressurised components must never be modified or disabled.

Why Buy Dexter Vertical Air Compressor Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we offer a selection of spare parts for Dexter vertical air compressors to help you repair and maintain your equipment.

Our catalogue includes motor carbon brushes, drive belts, pressure regulators, air pipes, O-rings and spacers for various compressor models.

We also offer components compatible with certain Scheppach, Aircase and Woodster machines, depending on available references and the compatibility information provided for each product.

Parts availability may vary according to stock levels and supplier deliveries.

Replacing a worn or defective component can help extend your compressor's service life and avoid replacing the entire machine prematurely.

Whether you are looking for carbon brushes for Dexter vertical air compressor, a drive belt, a pressure regulator or an air pipe for Dexter AC50V and AC51V, carefully review the product specifications to identify the correct reference for your machine.

Discover our selection of replacement parts for Dexter DX24V, DX50V, AC50V and AC51V vertical air compressors and maintain your equipment regularly to preserve its reliability, performance and service life.