Flat Belt for scorer of the wood combined Jean l’ébéniste COMB250 et COMB305, leman COM250, Bernardo FK250F and CWM260F
Trapezoidal Belt for spindle moulder of the wood combined Jean l’ébéniste COMB250 et COMB305, leman COM250, Bernardo FK250F and CWM260F
Trapezoidal Belt for saw of the wood combined Jean l’ébéniste COMB250 et COMB305, leman COM250, Bernardo FK250F and CWM260F
Replacement pressing roller (Ref. No. 82 or No. 313) compatible with ADM260, AD260S, ADH250P and CWM260F. Ensures uniform pressure, excellent wear resistance, and quick installation for optimal machine performance.
Replacement feed roller (Ref. No. 81 or No. 314) compatible with ADM260, AD260S, ADH250P and CWM260F. Ensures uniform pressure, excellent wear resistance, and quick installation for optimal machine performance.
Discover our selection of spare parts for Bernardo CWM260F combination woodworking machines, designed for maintenance, repairs and replacement of worn mechanical components.
The Bernardo CWM260F combination machine is a multifunctional woodworking machine capable of performing several operations, including sawing, surface planing, thicknessing and spindle moulding.
Like any combination woodworking machine, it incorporates several transmission and feeding systems that must be kept in good condition to ensure reliable operation and accurate woodworking results.
Over time, drive belts, feed rollers and other mechanical components may become worn or damaged.
At Probois Machinoutils, we offer several replacement parts for the Bernardo CWM260F, including belts for the circular saw, spindle moulder and scoring saw, as well as rollers used in the thicknessing mechanism.
These components help restore the relevant functions and extend the service life of your woodworking machine.
The drive belts for Bernardo CWM260F transfer power from the motor to the machine's various working mechanisms.
Depending on their location, they contribute to the operation of the circular saw, spindle moulder or scoring saw.
A drive belt in good condition ensures that the power required for woodworking operations is transmitted correctly.
Conversely, a worn, loose or damaged belt may cause reduced drive efficiency, vibrations or unusual noises.
Our selection includes several belt references designed for different functions of the Bernardo CWM260F.
The circular saw drive belt for Bernardo CWM260F transmits power to the sawing mechanism.
It plays an important role in driving the saw blade and maintaining consistent mechanical transmission.
Our catalogue includes a V-belt for the circular saw, also listed for certain combination woodworking machines and saw-spindle moulder combinations from other manufacturers.
This belt is indicated for the following machines:
Bernardo CWM260F.
Bernardo FK250F.
Jean l'ébéniste COMB250.
Jean l'ébéniste COMB305.
Leman COM250.
A defective belt may cause irregular power transmission, abnormal noises or reduced blade speed under load.
Before replacing the belt, it is advisable to inspect the pulleys and check their alignment.
To avoid ordering the wrong component, compare the original belt's specifications with those of the proposed replacement.
The SPZ620 spindle moulder belt for Bernardo CWM260F transmits power to the spindle moulder shaft.
It allows the drive mechanism to deliver the power required for profiling, grooving and moulding operations.
Our catalogue includes an SPZ620 V-belt, designed for the spindle moulding function of several combination woodworking machines.
This reference is listed for:
Bernardo CWM260F.
Bernardo FK250F.
Jean l'ébéniste COMB250 and COMB305.
Leman COM250.
A worn spindle moulder belt may cause drive problems, vibrations or irregular operation.
If the belt shows cracks, deformation or significant wear, replacement may be necessary.
It is also important to ensure that the pulleys are clean, correctly aligned and in good condition.
The SPZ620 reference must be respected whenever it matches the original belt fitted to your machine.
The scoring saw on the Bernardo CWM260F is designed to make a preliminary cut before the main saw blade passes through the material, particularly when cutting coated panels.
When correctly adjusted, it helps reduce chipping on the underside of sensitive materials.
The flat scoring saw belt for Bernardo CWM260F transmits the movement required to operate this mechanism.
Our catalogue includes a flat belt listed for scoring saw mechanisms on several machines:
Bernardo CWM260F.
Bernardo FK250F.
Jean l'ébéniste COMB250.
Jean l'ébéniste COMB305.
Leman COM250.
A loose or damaged scoring saw belt may result in poor transmission to the scoring mechanism.
This can affect the consistency of the preliminary cut and the operation of the scoring blade.
Before replacing the belt, inspect its condition and check the dimensions of the original component.
After installation, the operation and adjustment of the scoring saw must be checked according to the manufacturer's recommendations.
The feed roller for Bernardo CWM260F is part of the timber feeding mechanism used during thicknessing operations.
It moves the workpiece through the thicknesser to ensure consistent feeding beneath the cutterblock.
A feed roller in good condition contributes to accurate thicknessing and regular timber movement.
Our catalogue includes a replacement feed roller, identified as part No. 81 or No. 314 depending on the exploded parts diagram, listed for several Bernardo machines:
Bernardo CWM260F.
Bernardo ADM260.
Bernardo AD260S.
Bernardo ADH250P.
Over time, the roller may become worn or lose some of its feeding efficiency.
Several symptoms may indicate a problem:
Timber becomes difficult to feed through the thicknesser.
Feeding becomes irregular.
The workpiece stops during thicknessing.
Marks or jerky movements appear during feeding.
The roller shows visible wear or damage.
However, feeding problems are not necessarily caused by the roller itself.
They may also result from a transmission fault, incorrect adjustment, a dirty thicknessing table or another mechanical issue.
It is therefore advisable to inspect the entire feeding system before replacing the roller.
The pressure roller for Bernardo CWM260F helps support and guide the timber during thicknessing operations.
It applies pressure to the workpiece to help maintain stability and consistent movement through the thicknesser.
A correctly adjusted pressure roller contributes to regular feeding and reduces unwanted movement of the workpiece.
Our selection includes a replacement pressure roller, identified as part No. 82 or No. 313 depending on the exploded parts diagram, compatible with the following machines:
Bernardo CWM260F.
Bernardo ADM260.
Bernardo AD260S.
Bernardo ADH250P.
A worn or damaged pressure roller may cause uneven pressure on the timber.
It may also lead to feeding difficulties or inadequate support during machining.
Before replacement, inspect the roller, its supports and the adjustment mechanism.
The pressure roller and feed roller perform different functions and must not be confused.
Their references should be checked against the machine's exploded parts diagram.
Certain Bernardo CWM260F spare parts may also be suitable for other combination woodworking machines or planer thicknessers using similar components.
Depending on the specific reference, the compatibility information in our catalogue may include:
Bernardo CWM260F.
Bernardo FK250F.
Bernardo ADM260.
Bernardo AD260S.
Bernardo ADH250P.
Jean l'ébéniste COMB250 and COMB305.
Leman COM250.
This list covers machines associated with different spare parts in the category.
It does not mean that every belt or roller is compatible with all these models.
Circular saw, spindle moulder and scoring saw belts are designed for different functions.
Similarly, feed rollers and pressure rollers must be selected according to their position and exact reference.
Always check the compatibility information provided on each product page before ordering.
To select a suitable spare part for Bernardo CWM260F, it is essential to identify the component that needs replacing.
We recommend checking:
The exact model of your combination woodworking machine.
The information on its identification plate.
The part number shown in the exploded parts diagram.
The function concerned: circular saw, spindle moulder, scoring saw or thicknesser.
The dimensions of the original component.
The profile and reference of the drive belt.
The roller specifications and its installation position.
For a drive belt, the length, section and profile must match the original installation requirements.
For a thicknesser roller, check the reference, dimensions and mounting arrangement.
These checks help prevent ordering errors and ensure that the replacement part is compatible with your machine.
Several signs may indicate that a belt or roller on your Bernardo CWM260F combination machine requires inspection.
A cracked, frayed or deformed belt should be replaced before it breaks.
A slipping belt may cause reduced power transmission, although belt tension and pulley condition should also be checked.
A worn feed roller may make timber feeding difficult or irregular.
A damaged pressure roller may prevent the workpiece from being properly supported during thicknessing.
Unusual vibrations, mechanical noises or feeding difficulties should also be investigated.
Before replacing a component, it is important to identify the actual cause of the malfunction, as different faults may produce similar symptoms.
Regular maintenance helps preserve the performance and service life of your Bernardo CWM260F combination woodworking machine.
Remove accumulated sawdust and wood shavings from accessible mechanisms.
Regularly inspect the drive belts and check for cracks, deformation or other signs of damage.
Also monitor the condition of the pulleys and any unusual vibrations.
For thicknessing operations, inspect the feed and pressure rollers and keep the thicknessing table clean.
A dirty table or excessive friction may interfere with timber feeding.
Transmission and adjustment mechanisms should be maintained according to the manufacturer's recommendations.
Before carrying out any maintenance, disconnect the machine completely from the power supply and wait until all rotating components have stopped.
Never operate your combination woodworking machine with a missing guard, defective safety device or damaged transmission component.
At Probois Machinoutils, we offer a selection of drive belts and spare parts for Bernardo CWM260F combination woodworking machines.
Whether you are looking for a circular saw drive belt, SPZ620 spindle moulder belt, flat scoring saw belt, feed roller or pressure roller, browse the available references in this category.
Some of these parts may also be suitable for Bernardo, Jean l'ébéniste and Leman machines, according to the compatibility information provided on each product page.
Our spare parts catalogue may evolve depending on availability and customer requirements.
Cannot find the component needed to repair your machine?
Provide us with the exact model of your Bernardo combination machine and, whenever possible, the part number shown in its exploded parts diagram.
This information will help us identify the required component and check whether it can be supplied.
Repairing your Bernardo CWM260F with suitable replacement parts helps extend its service life and maintain its performance for woodworking applications.
