Filter By

Price

Price

  • €0.00 - €28.00

Availability

Availability

Parts for scroll saw Parkside PDS 120 B2

Parts for scroll saw Parkside PDS 120 B2 - Probois Machinoutils

Active filters

Foam Damping Ring for Scroll Saw Pivot Arm - Ref. 88000028

12,99 € Tax included

This original foam damping ring eliminates vibration and play at the upper pivot arm of your scroll saw. It helps ensure smooth, quiet operation while maintaining the correct movement of the saw arm.

Spare Parts for Parkside PDS 120 B2 Scroll Saw: Maintain and Repair Your Machine

Are you looking for a spare part for your Parkside PDS 120 B2 scroll saw to repair a fault, replace a worn component or extend the service life of your machine? At Probois Machinoutils, we offer a selection of replacement parts designed for the maintenance and repair of this scroll saw, also identified by the reference PDS120B2.

The Parkside PDS 120 B2 scroll saw is designed for fine cutting, model making, creative hobbies and woodworking. It allows users to produce curves, decorative cuts and intricate shapes in materials suitable for its cutting capacity.

Over time, certain electrical and mechanical components may show signs of wear or develop faults. A control malfunction, motor starting problem, defective air-blowing system or wear in the oscillating mechanism may require the replacement of a specific component.

Our catalogue includes motor carbon brushes, a foot pedal, an electronic speed controller, bellows, an air tube, a mechanical rod, a hinge bracket, a fixing component and a cushioning ring for compatible machines.

A Selection of Spare Parts for the Parkside PDS 120 B2 Scroll Saw

The Parkside PDS 120 B2 scroll saw uses a mechanism that converts the motor's rotary motion into the reciprocating movement of the blade. Several components contribute to transmitting this movement, adjusting the operating speed and improving working comfort.

To make maintaining and repairing your machine easier, we offer different types of replacement parts:

  • Motor carbon brushes: electrical components subject to gradual wear in motors equipped with this system.
  • Foot pedal: an accessory used to control the machine's operation according to the manufacturer's design.
  • Electronic speed controller: part of the cutting speed adjustment system.
  • Bellows: a component that produces airflow to clear sawdust from the cutting area.
  • Air tube: directs the airflow towards the cutting area.
  • Complete rod: a mechanical assembly involved in the operation of the oscillating mechanism.
  • Hinge bracket: a supporting or pivoting component used on certain scroll saws.
  • Fixing component: a part designed for a specific fastening function.
  • Cushioning ring: helps reduce vibrations and mechanical play.

Each reference must be selected according to the exact machine version and the list of compatible models indicated on the relevant product page.

Foot Pedal for Parkside PDS 120 B2 Scroll Saw

The foot pedal for the Parkside PDS 120 B2 scroll saw is an important component of the machine's control system.

It allows the user to control the saw using their foot, according to the electrical system designed by the manufacturer. This control method can improve operating comfort during tasks that require particular attention to workpiece positioning and following the cutting line.

We offer a replacement foot pedal, reference 3901405008, listed for the Parkside PDS120B2 and Scheppach Deco XLS scroll saws.

A defective foot pedal may cause control difficulties or prevent the machine from operating normally. However, a starting problem is not necessarily caused by the pedal: the motor, power supply or other components may also be involved.

Before ordering this part, it is important to check the exact scroll saw reference, connection type and specifications of the control system.

The foot pedal must not be modified or replaced with a device whose electrical compatibility has not been confirmed.

Motor Carbon Brushes for Parkside Scroll Saw

Motor carbon brushes for Parkside scroll saws are electrical components found in commutator motors. They maintain electrical contact with the rotating part of the motor and gradually wear down during operation.

When the brushes become too short or damaged, several symptoms may appear:

  • The motor no longer starts correctly.
  • Operation becomes intermittent.
  • Motor speed varies abnormally.
  • The brushes show significant wear during inspection.

Our catalogue includes motor carbon brushes, reference 5901403006, designed for various Scheppach, Woodstar, Parkside, Dexter and Mac Allister scroll saws according to the compatibility information.

Before replacing them, check the dimensions and condition of the brushes, as well as the condition of the brush holders. A motor fault should be properly diagnosed to avoid unnecessarily replacing a component that is still functioning correctly.

Electronic Speed Controller for Parkside PDS 120 B2 Scroll Saw

The electronic speed controller for Parkside scroll saws forms part of the machine's operating speed adjustment system.

Speed adjustment allows the blade movement to be adapted to the characteristics of the material being worked, its thickness and the complexity of the cuts.

We offer an electronic speed controller, reference 5901403011, designed for various Scheppach, Woodstar, Parkside, Dexter and Mac Allister scroll saws.

If the speed can no longer be adjusted correctly, the entire control system should be inspected before concluding that the controller is defective.

A speed-related problem may also result from an electrical fault, damaged connection or another component of the machine.

The speed controller must be replaced by a qualified person with the machine disconnected from the power supply, and only after confirming the compatibility of the part.

Bellows and Air Tube for Parkside Scroll Saw

The air-blowing system of the Parkside PDS 120 B2 scroll saw helps clear sawdust produced during cutting operations.

It improves visibility of the cutting line, which is particularly useful for scroll sawing tasks requiring precision and consistency.

This system includes two main components:

  • Bellows, reference 5901403013: designed for various Scheppach, Woodstar, Parkside, Dexter and Mac Allister scroll saws.
  • Air tube, reference 5901403012: directs airflow towards the working area on compatible machines.

Cracked, torn or deformed bellows may reduce the effectiveness of the air-blowing system. A blocked, damaged or incorrectly positioned air tube may also prevent sawdust from being cleared properly.

Before replacing either component, check its condition and make sure that the airflow system is not obstructed.

These components improve operating comfort, particularly during fine cuts and precision work.

Complete Rod for Scroll Saw Oscillating Mechanism

The rod for Parkside scroll saws is a mechanical component involved in the operation of the mechanism that drives the blade's reciprocating movement.

Our catalogue includes a complete rod, reference 5901403015, corresponding to positions 73, 74, 78, 81, 84, 91 and 117 on certain scroll saw exploded diagrams.

This reference is offered for various Scheppach, Woodstar, Dexter, Parkside and Mac Allister machines according to the compatibility lists.

Wear or damage to a component of the mechanism may cause unusual noises, vibrations or irregular blade movement.

Before replacing the rod, check the joints, fasteners and other associated mechanical components.

Installation must follow the manufacturer's instructions to preserve the proper operation of the oscillating mechanism.

Hinge Bracket for Scroll Saw

The hinge bracket for scroll saws is a mechanical component used on certain machines to support or provide a pivoting connection for part of the mechanism.

We offer a hinge bracket, reference 88000059, listed for certain Kity, Scheppach and Woodstar scroll saws.

This component may need to be replaced when an original bracket is cracked, deformed or worn in a way that could interfere with the operation of the corresponding joint.

Please note that the presence of this reference in the category does not automatically mean that it is suitable for every version of the Parkside PDS 120 B2.

It is essential to consult the compatible machine list on the product page and compare the original component before ordering.

Outlet Fixing Component for Scroll Saw

Our selection also includes an outlet fixing component, reference 5901403014, offered for certain Scheppach scroll saws.

Fixing components play an important role in assembling and securing the various mechanical parts of a machine.

A damaged, missing or deformed fixing component may affect the stability of an assembly and cause operating problems.

Before replacing this part, its exact position and function must be identified using the machine's exploded parts diagram.

Compatibility with the Parkside PDS120B2 must be checked on the product page, as a reference designed for a Scheppach scroll saw is not necessarily interchangeable with that of another model.

Cushioning Ring for Scroll Saw Oscillating Arm

The foam cushioning ring for scroll saws is designed to help reduce vibrations and mechanical play around the upper oscillating arm shaft on machines equipped with this system.

We offer a cushioning ring, reference 88000028, used in certain scroll saw mechanisms.

Over time, a cushioning ring may lose its properties, become deformed or deteriorate due to repeated movements.

Increased vibration, abnormal play or mechanical noises may justify inspecting this component and the surrounding joints.

Before ordering, check the dimensions, location and exact compatibility of the component with your machine.

How to Choose the Correct Spare Part for Parkside PDS 120 B2 Scroll Saw

Before purchasing a spare part for the Parkside PDS120B2 scroll saw, it is essential to identify your machine accurately.

The Parkside range includes the PDS 120 A1, PDS 120 B2 and PDS 120 B3 scroll saws. These different versions may have differences in their electrical components, controls and mechanisms.

A part compatible with the PDS 120 A1 or PDS 120 B3 is therefore not necessarily suitable for the PDS 120 B2.

To avoid ordering the wrong component, we recommend the following checks:

  • Confirm the exact model indicated on the machine identification plate.
  • Record the month and year of manufacture when available.
  • Note the machine serial number.
  • Consult the user manual and exploded parts diagram corresponding to your version.
  • Identify the reference or position number of the required component.
  • Compare the dimensions and specifications of the original part.
  • Check the list of compatible machines on each product page.

IMPORTANT: BEFORE PURCHASING, CHECK THE EXACT MODEL OF YOUR MACHINE, ITS MONTH AND YEAR OF MANUFACTURE, AND ITS SERIAL NUMBER. ALWAYS CONSULT THE LIST OF COMPATIBLE MACHINES ON EACH PRODUCT PAGE.

When Should You Replace a Part on Your Parkside Scroll Saw?

Several symptoms may indicate that a component of your Parkside PDS 120 B2 scroll saw needs inspection.

A machine that no longer starts, an unresponsive foot pedal, irregular speed or unusual vibrations may have several different causes.

Similarly, insufficient airflow may be caused by damaged bellows or a blocked air tube.

Unusual mechanical noises may be related to a joint, fixing component or part of the oscillating mechanism.

It is important to diagnose the problem before replacing a part. This helps identify the actual cause of the malfunction and avoids purchasing unnecessary components.

Maintenance Tips for Parkside PDS 120 B2 Scroll Saw

Regular maintenance helps preserve the proper operation and precision of your Parkside scroll saw.

After each use, it is advisable to remove dust and sawdust accumulated around the worktable, blade and accessible areas of the mechanism.

Regularly check the condition of the blade, its fixing, tension and the operation of the air-blowing system.

If unusual vibrations or noises occur, inspect the joints and fasteners before continuing to use the machine.

Before cleaning, inspecting or repairing the machine, disconnect it from the power supply and wait until all moving parts have come to a complete stop.

Work involving the speed controller, foot pedal and other electrical components must be carried out by a qualified person. Safety devices must never be modified or disabled.

Why Buy Parkside Scroll Saw Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we offer a selection of spare parts for the Parkside PDS 120 B2 scroll saw to make maintaining and repairing your machine easier.

Our catalogue includes electrical parts, control system components, oscillating mechanism elements and accessories designed to improve operating comfort.

Certain references may also be suitable for Scheppach, Woodstar, Kity, Dexter or Mac Allister scroll saws, but only when this compatibility is expressly stated on the relevant product page.

Our selection evolves according to component availability and the repair needs of scroll saw users.

Discover our replacement parts for Parkside PDS120B2 scroll saws: foot pedals, motor carbon brushes, electronic speed controllers, bellows, air tubes, complete rods, hinge brackets, fixing components and cushioning rings.

Before ordering, carefully check the references and compatibility information to select the correct component for your machine and help extend its service life under appropriate operating conditions.