Motor dia 83 mm shaft 40 mm for metal lathe Holzmann ED300FD and ED400FD
Carbon caps for milling machine and metal lathe Holzmann and Bernardo
.
Speed selector for Holzmann ED300ECO, ED300FD and ED400FD metal lathe
Handwheel diameter 80 mm bore 10 mm (delivered without graduation ring) for Holzmann ED300FD
Handwheel n° 84-1 diameter 90 mm bore 8 mm for Holzmann ED300ECO
Potentiometer for Holzmann ED300FD, ED400FD metal lathe and milling machine
Coals for milling machine and metal lathe Holzmann and Bernardo
The Holzmann ED300FD metal lathe is a compact machine designed for metal turning, machining and thread cutting operations. With a 300 mm distance between centres, a maximum swing over bed of 180 mm and a continuously variable spindle speed from 50 to 2500 rpm, it is suitable for workshops, demanding DIY users and small-scale metalworking applications.
Over time and after many hours of operation, mechanical and electrical components may become worn or require replacement. This category brings together our spare parts for the Holzmann ED300FD metal lathe, making it easier to maintain, troubleshoot and repair your machine.
We offer a growing selection of replacement parts for the Holzmann ED300FD metal lathe. Depending on availability, you can find components such as the motor, motor carbon brushes, speed control potentiometer, selector switch, as well as various electrical and mechanical parts required to repair the lathe.
The ED300FD features a 450 W S1 / 630 W S6 motor with a 230 V power supply. Its variable speed system allows the spindle speed to be adjusted continuously, while the digital display provides convenient speed monitoring.
A metal lathe is a precision machine, and its performance depends on the condition of its transmission, spindle, gears, slides, bearings and electrical components.
The Holzmann ED300FD is equipped with a hardened main spindle mounted on adjustable tapered roller bearings, an induction-hardened and precision-ground cast-iron prism bed, and a lead screw for thread cutting and automatic longitudinal feed.
Regular maintenance helps preserve the accuracy of the lathe and reduces premature wear of its components.
A metal lathe fault does not always result in a complete stop. Irregular speed, reduced motor power, difficult starting, unusual noise, overheating or belt slippage may point to different components.
Drive belts should be checked for cracks, glazing, loss of tension or damaged teeth. Where fitted, carbon brushes should retain sufficient length and move freely in their holders.
A faulty potentiometer or speed selector can also affect motor control. Before replacing a part, inspect the wiring, safety devices and general condition of the drive system. This can help avoid replacing a component when the actual cause of the fault lies elsewhere.
Regular maintenance helps reduce breakdowns and preserve machining accuracy. Keep the bed, slides and lead screws clean and correctly lubricated with suitable products.
Metal chips should not accumulate around moving parts, ventilation openings or the motor. Periodically inspect belt condition and tension, accessible fasteners and any abnormal play.
A clean and properly maintained machine is also easier to diagnose when a fault occurs. After a repair, test the lathe at low spindle speed before returning to normal machining operations.
Before ordering a spare part for the Holzmann ED300FD, it is important to check the exact version of your machine. The manufacturer may have introduced technical changes during the production life of the model.
Some replacement parts may therefore differ depending on the manufacturing date or serial number of your metal lathe.
For mechanical components, you can also consult the Holzmann ED300FD exploded parts diagram and identify the corresponding position number.
For electrical and mechanical components, a reference, marking or dimension can be as important as the machine model. Photograph the rating plate, original component, connectors and markings before dismantling.
For belts, record the profile and length marking whenever readable. For motors and electronic boards, retain all references and compare the connections.
This method greatly reduces the risk of compatibility errors, particularly on machines that have undergone technical or production changes.
Our range of Holzmann ED300FD spare parts is regularly updated according to customer requirements and parts availability from the manufacturer.
If the required component is not currently listed in this category, please provide us with the position number from the exploded parts diagram, together with the information shown on the machine identification plate.
IMPORTANT: BEFORE PURCHASING, carefully check the list of compatible machines shown on each product page.
For some spare parts, the machine model alone is not sufficient to guarantee compatibility. Due to technical changes made by the manufacturer, the same machine model may have been fitted with different components depending on its production date.
If you are unsure, please provide the exact model, month and year of manufacture, and serial number of your machine before ordering.
Probois Machinoutils offers a wide selection of spare parts for Holzmann machines, including replacement parts for metal lathes such as the ED300ECO, ED300FD, ED400FD and ED750FD.
Our catalogue includes many components for maintaining and repairing woodworking and metalworking machinery, including motors, belts, switches, potentiometers, carbon brushes, bearings and other mechanical and electrical replacement parts.
Our aim is to help you repair and extend the service life of your Holzmann ED300FD metal lathe rather than replace the complete machine, while making it easier to identify the correct spare part for your specific version.
