Blade guard for radial miter saw Holzmann KAP305ECO
Complete Blade guard for radial miter saw Holzmann KAP305ECO
Screw for Blade guard for radial miter saw Holzmann KAP305ECO
Guide for Holzmann KAP305ECO radial miter saw
Left movable stop mark 15 for Holzmann KAP305ECO radial miter saw
Right movable stop mark 15 for Holzmann KAP305ECO radial miter saw
Table insert for Holzmann KAP305ECO radial miter saw
Outer flange for Holzmann KAP305ECO radial miter saw
Inner flange for Holzmann KAP305ECO radial miter saw
Engine for radial miter saw Holzmann KAP305JL
Guide rod for Holzmann KAP305ECO radial miter saw
Laser unit for Holzmann KAP305ECO radial miter saw from 2020
Discover our selection of spare parts for the Holzmann KAP305ECO sliding mitre saw, designed for the maintenance, repair and replacement of worn or damaged components on your woodworking machine.
The Holzmann KAP305ECO is a sliding mitre saw equipped with a 305 mm saw blade, a motor rated at 1800 W in S1 duty and 2000 W in S6 duty, a belt-drive transmission and a double sliding arm. It also features a laser cutting-line guide and a saw head that can tilt both left and right.
This machine allows you to perform crosscuts, mitre cuts and bevel cuts on suitable wooden workpieces within its cutting capacities.
Thanks to its sliding mechanism, it can cut wider workpieces than a comparable mitre saw without a sliding function.
With regular use, certain components may become worn, break or require replacement.
A damaged blade guard, worn drive belt, bent fence or faulty laser can affect the operation of the machine.
At Probois Machinoutils, we offer a selection of spare parts to help you repair your Holzmann KAP305ECO and extend its service life.
This category includes safety guards, guiding components, blade-mounting parts, a replacement motor, a drive belt and a complete laser assembly.
Each spare part must be selected according to its reference, mounting position and, where necessary, the manufacturing period of your machine.
The blade guard for the Holzmann KAP305ECO is one of the machine's essential safety components.
It helps prevent accidental contact with the saw blade outside the cutting area, in accordance with the manufacturer's intended operation.
During cutting, this protective device must move as designed and then return to its intended protective position.
A cracked, broken or jammed blade guard must never be treated as a purely cosmetic defect.
Incorrect operation may leave the blade exposed and create a hazard for the user.
Our category includes two different spare parts:
Blade guard.
Complete blade guard assembly.
These two products must be distinguished when placing an order.
The individual blade guard and the complete assembly do not necessarily include the same components.
Consult the relevant product description to identify exactly which replacement part you need.
Important: never use your Holzmann KAP305ECO sliding mitre saw if the blade guard is missing, damaged, jammed or unable to perform its protective function.
The blade guard should be inspected whenever visible damage appears or its operation becomes impaired.
Several signs may indicate that replacement is necessary:
Cracks or breaks in the guard.
Deformation following an impact.
Damaged mounting points.
Irregular movement.
Jamming when moving the saw head.
Failure to return fully to its protective position.
Abnormal contact with other components.
Before carrying out any work, disconnect the machine from the mains and wait until the blade has come to a complete stop.
Also inspect the components associated with the guard, particularly its mounting points and operating mechanism.
Replacing the guard alone may not resolve the problem if other components are damaged.
After the repair, the protective device must operate correctly before the saw is used again.
This category also includes a blade guard mounting screw for the Holzmann KAP305ECO sliding mitre saw.
This spare part allows you to replace a lost or damaged original screw.
A damaged screw can affect the secure attachment of the guard or interfere with its movement.
It is therefore important to select the reference intended for this specific mounting position.
Do not use a screw that merely looks similar without checking its technical characteristics.
An incorrect length or shape could interfere with the movement of the guard or prevent proper assembly.
If the original screw has become loose or has been lost, also inspect its mounting point and the other fastening components.
After installation, make sure the guard is correctly secured and retains the freedom of movement specified by the manufacturer.
The fence for the Holzmann KAP305ECO is one of the components that help position and support the wooden workpiece correctly during cutting.
It provides a reference surface against which the material is placed.
Its condition is important for achieving consistent cuts and ensuring that workpieces are correctly positioned.
A bent or damaged fence can compromise the support provided to the wood.
This may cause incorrect workpiece positioning and reduce cutting accuracy.
The fence may need replacing in the following situations:
Deformation following an impact.
Cracks or breakage.
Damaged supporting surface.
Damaged mounting points.
Inability to restore the intended position.
Before replacing the fence, also inspect the other table components and fastening elements.
A loss of cutting accuracy can have several causes.
Important: wooden workpieces must always be correctly positioned and securely held in accordance with the manufacturer's instructions before cutting.
Our range includes two different movable stops for the Holzmann KAP305ECO sliding mitre saw:
Left movable stop – position 15.
Right movable stop – position 15.
These components form part of the workpiece guiding and supporting system.
They allow the supporting surfaces to be positioned according to the operations provided for in the machine's design.
A movable stop must be adjustable and capable of being securely fixed in position.
If it is damaged, bent or can no longer remain in its intended position, it may compromise the support of the wooden workpiece.
The left and right stops are sold separately.
It is therefore essential to identify the required side before ordering.
A left-hand stop must not be ordered as a replacement for a right-hand stop without checking the part reference.
If you are unsure, consult the KAP305ECO exploded diagram and compare the original component with the photographs in the product listing.
A movable stop may become damaged following an impact, incorrect handling or an incident during cutting.
The main defects to look for include:
Broken stop.
Visible deformation.
Damaged supporting surface.
Damaged fastening or locking mechanism.
Difficulty moving the stop.
Inability to secure it in the intended position.
Before carrying out any work, disconnect the machine from the mains.
Also check that the fastening elements and contact surfaces are undamaged.
After replacement, check the positioning of the fence and movable components in accordance with the manufacturer's instructions.
Do not operate the machine if the workpiece cannot be correctly positioned and securely held.
The table insert for the Holzmann KAP305ECO is located around the area through which the saw blade passes.
It forms part of the work surface surrounding this area, according to the machine's design.
During cutting operations, the insert may show signs of use or become damaged.
A severely damaged table insert may no longer perform its intended function correctly.
Replacement may be necessary if you notice:
Cracks.
Breakage.
Deformation.
Significant damage around the blade opening.
Incorrect seating in its mounting position.
Before ordering, check that the insert is specifically intended for the Holzmann KAP305ECO model.
After installation, make sure it is correctly positioned and secured.
The insert must not come into contact with the blade outside the clearance provided by the manufacturer.
The outer blade flange for the Holzmann KAP305ECO forms part of the blade-mounting system.
Together with the other clamping components specified by the manufacturer, it helps secure the saw blade to the shaft.
Its condition is essential for correct blade installation.
A bent or cracked flange, or one with a damaged contact surface, may compromise the secure clamping of the blade.
It must be replaced if it can no longer perform its function correctly.
The main defects to check for include:
Deformation.
Cracks.
Damaged contact surfaces.
Abnormal wear.
Damage following a mechanical incident.
When replacing this component, use only a flange suitable for the machine.
Follow the manufacturer's instructions regarding assembly order, positioning and tightening of the components.
Never operate the sliding mitre saw if the blade cannot be secured correctly.
The inner blade flange for the Holzmann KAP305ECO is another component of the blade-mounting system.
It works together with the outer flange and the corresponding clamping components.
The two flanges perform complementary functions but must not be confused.
Our category includes:
Inner blade flange.
Outer blade flange.
These spare parts are available separately.
Before ordering, identify precisely which flange needs replacing.
A damaged inner flange may affect the support and positioning of the blade.
Its condition should therefore be checked whenever work is carried out on the blade-mounting system.
If a defect is found, inspect the other associated components as well.
Replacing a single component is not sufficient if other parts of the clamping system are also damaged.
This category includes a replacement motor for the Holzmann KAP305ECO sliding mitre saw.
The motor is one of the machine's main drive components.
It provides the mechanical power required to drive the saw blade through the transmission system designed by the manufacturer.
The KAP305ECO is originally equipped with a motor rated at 1800 W in S1 duty and 2000 W in S6 duty.
A faulty motor may produce several symptoms:
The machine does not start.
Abnormal shutdowns.
Unusual noises.
Excessive heating.
Irregular operation.
However, these symptoms do not automatically mean that the motor needs replacing.
An electrical fault, a transmission problem or a jammed mechanism may cause similar symptoms.
A diagnosis is therefore essential before ordering a new motor.
Work on electrical components must be carried out by a suitably qualified person.
Before purchasing, also check that the motor is compatible with the exact version of your machine.
The Holzmann KAP305ECO is equipped with a belt-drive transmission system.
Our category includes a replacement drive belt for this sliding mitre saw.
The belt transfers movement from the motor to the blade-drive mechanism, according to the machine's design.
Over time, it may wear due to mechanical loads and operating hours.
A damaged belt may cause irregular power transmission, unusual noises or a loss of drive.
In some cases, it may eventually break.
The main signs to look for include:
Cracks in the belt.
Visible wear.
Deformation.
Unusual noises.
Excessive slipping.
Belt breakage.
Before replacing this component, also check the condition of the pulleys and the entire transmission system.
A new belt may quickly become damaged if another mechanical component is faulty.
Follow the manufacturer's instructions for accessing the transmission, installing the belt and setting its tension.
A loss of power or a reduction in blade speed may have several causes.
You should not automatically conclude that the motor is faulty.
A worn or slipping belt may interfere with power transmission.
An unsuitable, damaged or blunt saw blade may also increase the load required during cutting.
A mechanical problem can produce similar symptoms.
To guide the diagnosis, it is important to identify the circumstances in which the problem occurs.
If the motor appears to run but the blade is no longer driven correctly, the transmission system should be inspected.
If the problem occurs mainly during cutting, also check the condition of the blade and the operating conditions.
Never carry out these checks while the machine is connected to the mains or while the blade is still moving.
If you suspect an electrical problem, consult a qualified professional.
The motor or drive belt should only be replaced after the actual cause of the malfunction has been identified.
Our selection also includes a guide rod, position 62, for the Holzmann KAP305ECO sliding mitre saw.
This component belongs to the guiding system specified by the manufacturer.
A guide rod may need replacing if it is bent, broken or damaged.
Before ordering, its exact position must be checked against the machine's exploded diagram.
Position number 62 allows the relevant component to be identified precisely.
Do not confuse this rod with other parts of the sliding arm or guiding system.
A problem with the movement of the saw head may have several causes.
It may result from a damaged component, a mechanical obstruction or a fastening problem.
It is therefore important to inspect the entire affected mechanism before ordering a replacement part.
After the repair, check that the system operates correctly in accordance with the manufacturer's instructions.
This category includes a complete laser assembly for Holzmann KAP305ECO sliding mitre saws manufactured from 2020 onwards.
The laser provides a visual aid for indicating the cutting line.
It helps the user identify the cutting position according to the system fitted to the machine.
Over time, this component may develop a fault or require replacement.
Possible symptoms include:
The laser no longer switches on.
Intermittent or irregular operation.
An unusually weak laser beam.
A damaged laser assembly.
Before replacing it, check that the problem actually originates from the laser assembly rather than another component of its power supply or control system.
Important: this complete laser assembly is specified for Holzmann KAP305ECO machines manufactured from 2020 onwards.
This compatibility information is particularly important.
Do not order this spare part for a machine manufactured before 2020 without obtaining explicit confirmation of compatibility.
Check the machine's identification plate and note the serial number and manufacturing date, if available.
The laser is only a positioning aid. It does not replace the mechanical adjustments of the saw or the safety precautions required during cutting.
Before ordering a component, you must identify your sliding mitre saw precisely.
The information on the machine's identification plate is particularly important.
We recommend recording the following details:
Brand: Holzmann.
Exact model: KAP305ECO.
Supply voltage.
Serial number.
Manufacturing month and year.
Component position number in the exploded diagram.
Original part reference, if known.
For certain spare parts, the mounting side must also be checked.
This is particularly important for the left and right movable stops.
For other components, the manufacturing period is essential.
For example, the complete laser assembly offered in this category is intended for machines manufactured from 2020 onwards.
The inner and outer blade flanges must also be identified separately.
You should also distinguish between the individual blade guard and the complete guard assembly to ensure that you order the product corresponding to your needs.
IMPORTANT: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the relevant spare part product page. Where necessary, also check the manufacturing month, manufacturing year and serial number of your machine.
A visual resemblance alone never guarantees that a spare part is compatible.
Regular maintenance helps preserve the performance, accuracy and safety of your sliding mitre saw.
Before carrying out any work, disconnect the machine from the mains and wait until the blade has come to a complete stop.
Regularly check that the blade guard operates correctly.
It must be able to move freely and perform its protective function in accordance with the manufacturer's instructions.
Also inspect the condition of the fence and movable stops.
A damaged supporting surface may affect the correct positioning of the wooden workpiece.
Inspect the table insert and make sure it is securely fitted.
The blade-mounting system must remain in good condition.
When changing the blade, check the flanges and other clamping components in accordance with the manufacturer's instructions.
The transmission system should also be inspected regularly to detect early signs of belt wear.
Clean the machine regularly and make sure the dust extraction system is operating correctly.
Finally, check the movement of the sliding arm and the general condition of all safety devices.
A saw with a defect that could affect safety must not be used again until it has been repaired.
A fault affecting a single component does not necessarily require replacing the entire sliding mitre saw.
A broken blade guard, worn belt, damaged stop or faulty laser can be repaired by replacing the affected component, provided a compatible spare part is available.
Our spare parts selection allows several components of the Holzmann KAP305ECO to be replaced individually.
However, a diagnosis should be carried out before ordering.
A drive problem may originate from the belt, but it may also be caused by another mechanical component.
A loss of cutting accuracy may be related to the fence, movable stops or machine adjustments.
A starting problem does not necessarily mean that the motor is faulty.
Identifying the actual cause of the malfunction allows you to choose the correct component and avoid unnecessary purchases.
A properly carried out repair helps extend the service life of your sliding mitre saw.
Our range of spare parts for the Holzmann KAP305ECO may expand over time.
If you are looking for a component that is not listed in this category, you can send us an enquiry to help identify the part you need.
Please provide the following information:
The exact model of your saw.
The serial number.
Manufacturing month and year, if available.
The component position number in the exploded diagram.
A photograph of the required component.
Its reference or dimensions, if known.
This information is particularly useful for distinguishing between different versions of the machine.
It also helps prevent confusion between left-hand and right-hand components, complete assemblies and parts sold individually.
Availability of components not listed in our catalogue must be confirmed before an order can be placed.
At Probois Machinoutils, we help you maintain and repair your Holzmann KAP305ECO sliding mitre saw.
Discover a selection of spare parts for your machine in this category:
Blade guard.
Complete blade guard assembly.
Blade guard mounting screw.
Fence.
Left movable stop, position 15.
Right movable stop, position 15.
Table insert.
Outer blade flange.
Inner blade flange.
Replacement motor.
Drive belt.
Guide rod, position 62.
Complete laser assembly for machines manufactured from 2020 onwards.
Before ordering, always check that the spare part is compatible with the exact version of your machine.
Do you need another component for your KAP305ECO?
Send us your saw's identification details and the position number of the required component from the exploded diagram so that we can help you identify it.
Probois Machinoutils: your specialist in Holzmann sliding mitre saw spare parts, helping you maintain, repair and extend the service life of your woodworking machines.
