The Baby M3 automatic router trainer can be used vertically or horizontally!

The role of the coach is to move the wood forward without the hands interfering. This provides maximum safety, and its regularity in the advance of the wood allows a much better quality finish to be obtained! (reduction of marks and splinters). And finally, passing small parts will no longer be a problem!

Use: with a router - circular saw - jointer 2 possible positions:

• horizontal for woods laid flat on the table.
• vertical for wood placed on the edge.
• In addition, the irons or cutters will wear more evenly and therefore need less frequent sharpening.

Benefits of the Baby M3 automatic power feeder :

• Robust trainer support with very good rigidity.
• Integrated speed variator: continuous feed speed adjustment from 2 to 12 m / min depending on the type of machining.
• A safety switch makes it possible to instantly stop the advance of the wood.
• Reversible feed: fragile materials can be machined "by swallowing" (wood feed in the direction of rotation of the tool) in order to obtain a perfect surface condition without risk of accident.
• 3 rollers ensure the drive of the parts. Their rubberized coating preserves the surface of the wood (no traces on the machined parts).
• Can be used vertically (resting on the table) or horizontally (resting on the guide).

General description of the power feeder :

• Speed ​​variator.
• Drive by 3 rollers.
• Forward, reverse.
• Work horizontally and vertically.
• Designed for small and medium sized machines.

Technical characteristics of the Baby M3 power feeder :

• Total height with handle mm: 265
• Width mm: 320
• Total length mm: 530
• Max height of the workpiece mm: 150
• Speed ​​m / min: from 2 to 12
• Dimensions of the drive rollers mm: ø 76 x 30
• Number of rollers: 3
• Motor (50 Hz): 230 V
• Arm stroke depth mm: 260
• Vertical stroke of the rollers mm: 16
• Weight kg: 12

In which cases and why use a power feeder for a spindle moulder?

A spindle moulder power feeder, also known as a mechanical feeder for spindle moulders, is an essential device for improving safety, consistency and productivity during woodworking operations.

Installed above the spindle moulder, this unit automatically feeds wooden workpieces thanks to several motorized rollers that push the piece steadily against the cutting tool.

A spindle moulder power feeder consists of an electric motor connected to several feed rollers mounted on an articulated arm.

These rollers apply constant pressure to the wooden workpiece and move it forward automatically at a constant feed speed.

This system keeps the workpiece firmly pressed against the fence, ensuring a steady feed rate and preventing variations during machining.

The operator no longer needs to push the workpiece manually: the power feeder does the job. The rollers apply consistent pressure on the wood and automatically move it forward at a constant speed.

Consistent machining quality

Thanks to the constant feed speed, the workpiece is machined evenly and without jerks.

This makes it possible to achieve:

• a cleaner finish

• a perfectly consistent profile

• fewer machining defects

Increased productivity

A power feeder allows work to be performed faster and more comfortably.

It is particularly useful for series production, as it guarantees a constant feed rate for all workpieces. This improves production efficiency while reducing operator fatigue.

Better control of difficult workpieces

A power feeder is also very useful when working with long, narrow or difficult-to-hold pieces, as it keeps the workpiece firmly pressed against the fence and the spindle moulder table.