Filter cartridge designed for the Holzmann ABS850 chip vacuum cleaner
Filter bag for chip vacuum cleaner Holzmann ABS850
Steel turbine diameter 228 mm dedicated to the dust collector Holzmann ABS850
Lower shell for Holzmann ABS850 chip vacuum cleaner
750W single-phase motor for Holzmann ABS850 dust collector
Filter bag holding bar reference 5906307013 for Scheppach DC500 chip vacuum cleaner
M8x40 screw or handle ref 10013081 for Holzmann ABS850 dust collector
Strap 84-90 cm for dust collector
Discover our selection of spare parts for the Holzmann ABS850 dust collector and maintain your woodworking dust extraction system.
The Holzmann ABS850 is designed to collect wood chips and some of the dust produced during sawing, planing, thicknessing and other woodworking operations.
Over time, certain components may wear out, become damaged or require replacement. A damaged filter bag, defective impeller or faulty motor can affect the operation of the dust collector and disrupt work in your workshop.
At Probois Machinoutils, we offer a range of replacement components selected for the Holzmann ABS850, including a filter cartridge, cotton filter bag, steel impeller, single-phase motor, lower housing, filter bag support rod, retaining band and electrical components.
Whether you need a replacement part to repair your machine or an accessory to maintain your dust extraction system, this category helps you identify suitable components for your dust collector.
The Holzmann ABS850 is a mobile dust collector designed to be connected to a compatible woodworking machine.
It features a single-phase motor, a steel impeller and a filtration system with a filter bag and a wood chip collection bag.
Its main technical specifications are as follows:
Model: Holzmann ABS850.
Machine reference: HABS850.
Motor power S1: 750 W.
Motor power S6: 1050 W.
Power supply: 230 V / 50 Hz.
Airflow capacity: 850 m³/h.
Dust extraction connection diameter: 100 mm.
Negative pressure: 800 Pa.
Wood chip collection bag capacity: 40 litres.
Wood chip collection bag diameter: 280 mm.
Wood chip collection bag length: 900 mm.
Impeller diameter: 230 mm.
Net weight: 23 kg.
These specifications help identify the machine and select the corresponding replacement parts.
However, the nominal impeller diameter stated in the machine specifications does not replace the detailed dimensions of the spare part. Always check the diameter, height, bore and mounting system before ordering.
The 280 mm diameter filter cartridge provides a filtration option compatible with the Holzmann ABS850 dust collector.
It allows the upper filter bag to be replaced with a cartridge filtration system, provided that the product's specifications and installation requirements are respected.
A filter cartridge in good condition helps retain airborne particles carried through the extraction system and limits their release into the workshop.
It may be particularly useful for users who wish to equip their dust collector with a different filtration system from the original fabric bag.
The cartridge offered in this category is also listed for certain other dust collectors, including the Scheppach DC500 and Zipper ASA550B.
Nevertheless, exact compatibility must always be verified before purchasing.
When should a filter cartridge be replaced?
A cartridge may require replacement if it is torn, deformed, its filter media is damaged or its filtration performance cannot be restored through maintenance carried out according to the manufacturer's instructions.
Reduced airflow may also be caused by a clogged filter, but other possible causes should be investigated before concluding that the cartridge is defective.
The cotton filter bag for the Holzmann ABS850 is designed for the upper section of the filtration system.
Its purpose is to allow air to pass through while retaining some of the particles carried by the airflow.
A filter bag in good condition is essential for the proper operation of the dust collector.
If it is torn, punctured or incorrectly secured, dust may escape into the working environment.
The filter bag should be inspected regularly, particularly around its seams and attachment points.
When should the filter bag be replaced?
Replacement may be necessary in the following situations:
Torn or punctured fabric.
Damaged seams.
Heavy clogging despite appropriate maintenance.
Inadequate attachment.
Abnormal dust emissions caused by damage to the bag.
Before ordering, make sure you need the upper filter bag rather than the lower bag used to collect wood chips.
These two components perform different functions.
The impeller is one of the essential components of a dust collector.
Driven by the electric motor, it generates the airflow needed to transport wood chips and dust from the woodworking machine to the collection system.
This category includes a steel impeller designed for the Holzmann ABS850, with the following dimensions:
Outside diameter: 228 mm.
Height: 77 mm.
Bore: 16 mm.
Mounting: Keyway.
These specifications must be checked before ordering, particularly if your dust collector belongs to an older production series.
A damaged impeller may cause significant vibrations, abnormal noises or reduced extraction performance.
When should the impeller be replaced?
Replacement may be necessary if the blades are broken, the impeller is deformed or cracked, or its attachment to the motor shaft is defective.
If the impeller comes into contact with its housing, stop the machine immediately.
It is essential to identify the cause of the problem before replacing the component.
A new impeller will not necessarily resolve a fault caused by a damaged motor shaft or an incorrect mounting arrangement.
The electric motor drives the impeller and powers the dust extraction system.
We offer a 750 W single-phase motor designed for the Holzmann ABS850 dust collector.
This component may be required when the original motor is defective and repairing it is not appropriate.
However, a starting problem does not automatically mean that the motor needs to be replaced.
Several components may cause a malfunction, including the power supply, switch, capacitor where fitted, electrical connections or a mechanical blockage.
It is therefore important to carry out a diagnosis before ordering a replacement motor.
When should the motor be replaced?
Replacement may be considered when a diagnosis confirms an internal motor fault, damaged winding or a failure that cannot be repaired under suitable conditions.
Before purchasing, check the machine reference, electrical specifications and mounting dimensions.
Work on the motor and electrical circuits must be carried out by a qualified person with the machine disconnected from the power supply.
The lower housing for the Holzmann ABS850 forms part of the mechanical assembly surrounding the impeller.
It helps enclose the extraction mechanism and direct the airflow.
An impact, deformation or crack may damage this component.
A damaged housing may also cause incorrect assembly or abnormal contact with moving parts.
Before ordering a replacement housing, we recommend inspecting the impeller, fasteners and other housing components.
It is important to establish whether the damage is the result of a more serious mechanical problem.
The replacement housing must correspond exactly to the version of your dust collector.
The support rod holds the upper filter bag in its operating position.
Our selection includes a filter bag support rod, reference 5906307013, listed for the Holzmann ABS850 and Scheppach DC500 dust collectors.
This component may be required if the original support is broken, bent or missing.
A correctly supported filter bag can expand properly while the dust collector is operating.
If the support rod is damaged, the bag may become incorrectly positioned.
Before ordering, check the part reference and the mounting points on your machine.
Correctly securing the bags is essential to limit dust leakage and prevent them from becoming detached during operation.
This category includes a metal retaining band for dust collectors, with an adjustable length of 84 to 90 cm.
It can be used to secure a bag to a compatible mounting point, provided its dimensions match those of the dust collector.
Before ordering, measure the circumference of the attachment area and check the tightening mechanism.
A band that is too short or too long may not provide adequate retention.
When should a retaining band be replaced?
Replacement may be necessary if the band is deformed, broken, heavily corroded or if its tightening mechanism no longer works correctly.
An incorrectly secured bag may cause air leaks and dust emissions.
This category also includes various components for repairing and maintaining the dust collector.
M8 x 40 mm screw or knob: reference 10013081, designed for the Holzmann ABS850.
This component may be required if an original fastener is broken, missing or has damaged threads.
Before ordering, check the dimensions, thread type and mounting position.
CK-5 10 A switch: a switch offered for various woodworking machines.
When replacing a switch, it is essential to check the original reference, electrical specifications, number of terminals, connections and installation dimensions.
A switch that looks similar to the one fitted to your machine is not necessarily compatible.
Never select an electrical component based solely on its photograph.
Reduced extraction performance may have several causes.
Before replacing a component, we recommend checking the most accessible parts of the system first.
Full collection bag: an excessively full bag may restrict airflow.
Clogged filter bag: accumulated dust can increase resistance to airflow.
Blocked filter cartridge: an obstructed filter can reduce airflow.
Blocked extraction hose: wood chips or offcuts may partially obstruct the hose.
Leaks at the connections: a poorly secured hose or incorrectly fitted bag can reduce extraction efficiency.
Damaged impeller: deformed or damaged blades may affect performance.
Motor problem: an electrical or mechanical fault may prevent the impeller from operating normally.
Reduced suction should therefore not automatically lead to motor replacement.
It is preferable to identify the exact cause of the malfunction.
Regular maintenance helps preserve your dust collector's performance and reduce the risk of breakdowns.
Empty the collection bag before it becomes excessively full.
Regularly inspect the filter bag or filter cartridge, depending on the equipment installed.
Check the extraction hose to ensure it is not blocked, crushed or punctured.
Inspect the bag attachments and retaining bands.
Pay attention to any unusual noises coming from the impeller or motor.
If abnormal vibrations occur, stop the machine immediately and investigate their cause.
Before cleaning, inspecting or maintaining the dust collector, disconnect it from the power supply and wait until the impeller has come to a complete stop.
All maintenance operations must be carried out in accordance with the manufacturer's instructions.
The ABS850 is a dust collector for woodworking machines. Its filtration equipment must be selected according to the dust produced and the protection requirements applicable to the intended use.
Do not assume that a cotton filter bag or a cartridge with unspecified filtration performance provides sufficient protection against fine wood dust on its own.
Before ordering a component, start by checking your dust collector's identification plate.
Record the exact model, serial number and, where necessary, manufacturing date.
Then consult the machine's exploded parts diagram to identify the component you need.
For an impeller, check the outside diameter, height, bore and keyway.
For a filter cartridge, verify the diameter and mounting system.
For a metal retaining band, measure the circumference of the attachment area.
For a motor or switch, carefully compare the electrical specifications and mounting dimensions.
Two visually similar components may have different technical characteristics.
IMPORTANT: BEFORE PURCHASING, always check that your machine appears in the list of compatible machines provided on the spare part's product page. Where necessary, also verify the month and year of manufacture and your machine's serial number.
A malfunctioning dust collector does not necessarily need to be replaced entirely.
When a diagnosis identifies the defective component accurately, replacing the affected part may help extend the machine's service life.
A torn filter bag, broken retaining band, damaged housing or defective impeller may require a targeted repair.
However, any repair must be appropriate for the overall condition of the dust collector and the nature of the fault.
Electrical work and complex mechanical repairs should be entrusted to a qualified person.
At Probois Machinoutils, we are expanding our range of spare parts for Holzmann dust collectors to help you maintain and repair your woodworking equipment.
This category includes a selection of filter bags, filter cartridges, impellers, motors, housings, bag supports, retaining bands, switches and fasteners for the Holzmann ABS850 dust collector.
If you cannot find the component you need, please provide the exact model of your dust collector, its serial number and, if possible, the position number shown on its exploded parts diagram.
A photograph of the original component may also help us identify the correct replacement.
Explore our selection of spare parts for the Holzmann ABS850 dust collector and carefully check their compatibility to maintain your extraction system and restore your machine to working order.
