Planer shaft protector for Bernardo PT305D
Chip ejection housing for planer jointer
Suction housing and chain protector for Holzmann HOB260ABS and Bernardo PT305D thicknesser planer
KJD17B 230V switch, position 106, for Holzmann HOB260ABS and HOB305ABS planer thicknessers and Bernardo PT260, PT260S, PT305D and PT305DS models.
This replacement switch is designed to replace a faulty, damaged or worn switch that no longer operates the planer thicknesser correctly.
Part number: HPD10000036
22-link drive chain, position 158, for Holzmann HOB305ABS, HOB305ABSSMW2 and Bernardo PT305D, PT305DS planer thicknessers.
This chain is a replacement spare part designed for the transmission mechanism of compatible machines.
Number of links: 22
Position: 158
Bearing mark 122 for planer jointer Bernardo PT260, Holzmann HOB260ABS
Jointer guide support mark 170
Dust port for the filter bag for planer and thicknesser Bernardo PT260, PT305D or Holzmann HOB260ABS.
Planing guide support reference 10006051 for planer thicknesser with integrated suction
Guide only for Holzmann HOB260ABS and Bernardo PT305D jointer and planer
520J3 (205J) dust extraction turbine drive belt, position 126, for Holzmann HOB260ABS, HOB305ABS, HOB305ABSSMW2 and Bernardo PT260, PT260S, PT305D and PT305DS 230V planer thicknessers.
This 3-rib Poly-V belt drives the turbine of the integrated dust extraction system on compatible machines.
Belt marking: 520J3 (205J)
Number of ribs: 3
Position: 126
This emergency stop switch is a replacement part designed for several Holzmann and Bernardo 230V planer thicknessers.
It allows the machine to be stopped quickly when required and is an important component of the machine's electrical control and safety system.
Axis dedicated to the drive pulley for various Kity and Scheppach woodworking machines
Cotton filter bag for planer and thicknesser Holzmann HOB305ABS(SMW2) and Bernardo PT305D(S)
Marker pulley 154 for planer thicknesser Bernardo PT260, PT305D and Holzmann HOB260ABS
940J5 (370J) motor drive belt, position 116, for Holzmann HOB260ABS, HOB305ABS, HOB305ABSSMW2 and Bernardo PT260, PT260S, PT305D and PT305DS 230V planer thicknessers.
This 5-rib Poly-V drive belt transmits power from the motor to the drive mechanism on compatible machines.
Belt marking: 940J5 / 370J
Number of ribs: 5
Position: 116
Motor pulley, position 113, references 10002928 / 10017609, for Holzmann HOB260ABS, HOB305ABS, HOB305ABSSMW2 and Bernardo PT260, PT260S, PT305D and PT305DS planer thicknessers.
This motor drive pulley transmits the motor rotation to the machine's drive system.
References: 10002928 / 10017609
Position: 113
Type: motor pulley
Planer tension spring for different woodworking machines Kity, Scheppach and Woodster
Mark fan 120 for Holzmann HOB260ABS and Bernardo PT260/Bernardo PT305D planer jointer
Chain drive pinion for planer thicknesser Holzmann HOB260ABS and Bernardo PT260 or Bernardo PT305D
695 x 10 mm flat drive belt, position 151, for Holzmann HOB260ABS, HOB305ABS, HOB305ABSSMW2 and Bernardo PT260, PT260S, PT305D and PT305DS 230V planer thicknessers.
This flat transmission belt is a replacement spare part designed for compatible machines.
Dimensions: 695 x 10 mm
Type: flat belt
Position: 151
Contactor QKS8 for different Scheppach and Kity band saws
53-link drive chain, position 82, for Holzmann HOB305ABS and Holzmann HOB305ABSSMW2 planer thicknessers.
This chain is a replacement spare part designed for the transmission mechanism of compatible machines.
Number of links: 53
Holzmann part number: 10017602
This M5x10 fixing screw is designed to secure the carbide inserts on the cutterblock of Holzmann HOB305ABSSMW2 and Bernardo PT305DS planer thicknessers.
Ideal replacement part for a lost screw, damaged drive recess or worn thread when replacing or rotating carbide inserts.
This chip deflector, item 45, is a replacement part designed for Holzmann HOB305ABSSMW2 and Bernardo PT305DS planer thicknessers.
Installed inside the machine, it helps guide and deflect wood chips towards the extraction system for efficient chip removal.
This infeed roller, item 52, is a replacement part designed for Holzmann HOB305ABSSMW2 and Bernardo PT305DS planer thicknessers.
Located at the infeed side of the thicknesser, it ensures the smooth and consistent feeding of the workpiece towards the cutterblock during thicknessing operations.
This outfeed roller, item 70, is a replacement part designed for Holzmann HOB305ABSSMW2 and Bernardo PT305DS planer thicknessers.
Located after the cutterblock, it ensures the smooth and consistent feeding of the workpiece towards the exit of the thicknesser after machining.
This thicknesser adjustment handwheel, item 96, is a replacement part designed for Holzmann HOB305ABSSMW2 and Bernardo PT305DS planer thicknessers.
It operates the thicknesser table height adjustment mechanism, allowing the required workpiece thickness to be set for thicknessing operations.
This 15A overload protector, item 194, is a replacement part designed for several Holzmann and Bernardo 230V planer thicknessers.
This electrical safety device cuts the power supply in the event of an overload or excessive current, helping to protect the motor and the machine's electrical circuit.
Discover our selection of spare parts for the Holzmann HOB305ABSSMW2 planer thicknesser, designed to make maintenance, troubleshooting and repairs on your woodworking machine easier.
The Holzmann HOB305ABSSMW2 is a planer thicknesser equipped with a stand and an integrated dust extraction system. It performs two essential woodworking operations: surface planing, which produces a flat face and a reference edge, and thicknessing, which brings wooden workpieces to the required thickness.
Over time, certain mechanical and electrical components may wear out or become damaged. A defective belt, broken drive chain, worn feed roller or damaged adjustment handwheel can interfere with the machine's operation.
At Probois Machinoutils, we offer a selection of replacement parts for the main assemblies of your Holzmann HOB305ABSSMW2.
Our range includes transmission belts, two drive chains of different lengths, infeed and outfeed rollers, a motor pulley, an adjustment handwheel, a chip deflector, carbide insert fastening screws and electrical components.
Each reference must be selected according to the exact version of your machine and the compatibility information provided on its product page.
The motor drive belt transmits movement between the motor and the driven mechanism of the planer thicknesser.
Our selection includes the 940J5 (370J) Poly-V motor drive belt, position 116, intended in particular for the 230 V version of the Holzmann HOB305ABSSMW2.
Its specifications are:
Marking: 940J5 / 370J.
Type: Poly-V belt.
Number of ribs: 5.
Position on the exploded parts diagram: 116.
A motor drive belt may need replacing if it shows cracks, damaged ribs, deformation or breakage.
Slipping can also cause irregular power transmission.
However, a loss of power is not necessarily caused by the belt. It is also important to inspect the pulleys and investigate any possible mechanical blockage.
Before fitting a new belt, check the associated components to prevent premature wear.
Important: the 940J5 motor drive belt must not be confused with the 520J3 impeller belt or the 695 × 10 mm flat belt.
The Holzmann HOB305ABSSMW2 features an integrated dust extraction system designed to collect wood chips produced during surface planing and thicknessing.
Our category includes the 520J3 (205J) impeller drive belt, position 126.
This Poly-V belt transmits the movement required to drive the dust extraction impeller on compatible machines.
Its specifications are:
Reference: 520J3 (205J).
Type: Poly-V belt.
Number of ribs: 3.
Position: 126.
An impeller belt may need replacing if it is broken, worn, deformed or no longer provides proper drive transmission.
If extraction performance becomes insufficient, check the condition of this belt, as well as the impeller, filter bag and chip extraction circuit.
A blocked extraction outlet or excessive accumulation of wood chips can also reduce extraction performance.
Before ordering, check the 520J3 (205J) marking and position 126.
Our selection also includes a 695 × 10 mm flat transmission belt, position 151, intended in particular for the 230 V version of the Holzmann HOB305ABSSMW2.
This belt differs from the Poly-V belts used for the motor and impeller.
Its specifications are:
Type: Flat belt.
Dimensions: 695 × 10 mm.
Position: 151.
A flat belt may need replacing if it shows cracks, deformation, breakage or significant wear.
Before ordering, identify the exact belt that needs replacing on your machine's exploded parts diagram.
Also check the dimensions of the original component.
A belt with a similar length is not necessarily a suitable replacement.
The drive chain forms part of the planer thicknesser's drive mechanism.
Our category includes a 53-link drive chain, position 82, intended for the Holzmann HOB305ABS and HOB305ABSSMW2 models.
Its specifications are:
Number of links: 53.
Position: 82.
Holzmann reference: 10017602.
This chain transmits movement between the relevant mechanical components.
It may need replacing if it is broken or shows damaged links, deformation or significant wear.
Unusual noises or irregular operation of the mechanism may also indicate that an inspection is necessary.
Before replacing the chain, check the condition of the sprockets and investigate any possible cause of mechanical blockage.
A damaged sprocket can cause premature wear of the new chain.
Important: this chain has 53 links. It must not be confused with the 22-link chain, position 158, which is also offered for this machine.
The Holzmann HOB305ABSSMW2 also uses a 22-link drive chain, position 158, available in our selection.
According to the compatibility information, this chain is intended for the following models:
Holzmann HOB305ABS.
Holzmann HOB305ABSSMW2.
Bernardo PT305D.
Bernardo PT305DS.
Its main specifications are:
Number of links: 22.
Position: 158.
It is a replacement part for the relevant transmission mechanism.
A 22-link chain cannot be replaced with a 53-link chain simply because both references are intended for the same machine.
Their lengths and positions are different.
Before ordering, consult the exploded parts diagram for your Holzmann HOB305ABSSMW2 and identify the exact position of the defective chain.
Position 82: 53-link chain. Position 158: 22-link chain.
This distinction is essential to avoid ordering the wrong part.
The motor pulley transmits movement between the motor and the machine's drive system.
Our selection includes the motor pulley, position 113, associated with Holzmann references 10002928 and 10017609.
It is intended in particular for the Holzmann HOB305ABS and HOB305ABSSMW2 models, according to the compatibility information.
A pulley may need replacing if it shows:
Cracks or breakage.
Deformation.
Damage to the grooves.
Abnormal wear.
A defective fastening system on its shaft.
A damaged pulley can cause vibrations, incorrect belt positioning or irregular power transmission.
Before replacing it, also check the condition of the motor drive belt and the fastening system.
Always identify position 113 and references 10002928 / 10017609 before ordering.
A visually similar pulley may have a different diameter, bore or profile.
The infeed roller plays an essential role in the thicknessing function.
Our selection includes the infeed roller, position 52, intended for the Holzmann HOB305ABSSMW2 and Bernardo PT305DS planer thicknessers.
Located at the entrance to the thicknesser, it feeds the wooden workpiece towards the cutterblock during thicknessing.
An infeed roller in good condition helps maintain a consistent feed rate.
It may need replacing if it shows:
Significant surface wear.
Deformation.
Mechanical damage.
Defects that prevent proper feeding of the wood.
A feed problem can cause the workpiece to move irregularly or prevent it from being fed through the machine.
However, the roller is not necessarily responsible.
The drive mechanism, chains and associated components should also be checked.
Before ordering, check position 52 and compatibility with your machine.
The outfeed roller operates after the wooden workpiece has passed beneath the cutterblock.
Our category includes the outfeed roller, position 70, intended for the Holzmann HOB305ABSSMW2 and Bernardo PT305DS models.
It continues to feed the wood towards the thicknesser's exit after machining.
A damaged outfeed roller can interfere with the smooth movement of the workpiece out of the machine.
It may need replacing if it shows deformation, significant wear or mechanical damage.
If the wood feeds correctly at the entrance but encounters difficulties at the exit, inspecting this roller may be useful.
However, the diagnosis should also take the other components of the mechanism into account.
Important: the outfeed roller, position 70, and the infeed roller, position 52, are two different parts.
Their positions and functions must be checked before ordering.
Our selection includes the adjustment handwheel, position 96, intended for the Holzmann HOB305ABSSMW2 and Bernardo PT305DS planer thicknessers.
This handwheel operates the thicknessing table height adjustment mechanism.
It therefore plays a direct role in setting the required thickness of the wood.
A handwheel may need replacing if it is broken, cracked, deformed or if its fastening system is damaged.
However, a handwheel that is difficult to turn is not necessarily defective.
The problem may originate from the table raising and lowering mechanism.
Before replacing the handwheel, check that no mechanical blockage is preventing adjustment.
Never force a handwheel when the table offers abnormal resistance.
The correct position number for this handwheel is 96.
The chip deflector helps guide and evacuate wood chips produced during machining.
Our category includes the chip deflector, position 45, intended for the Holzmann HOB305ABSSMW2 and Bernardo PT305DS models.
Installed inside the machine, it helps direct wood chips towards the dust extraction system.
A deflector may need replacing if it is broken, cracked, deformed or if its fastenings are damaged.
A deteriorated component can interfere with chip evacuation and encourage material to accumulate in certain areas.
If you notice abnormal chip evacuation, inspect the deflector and the other components of the extraction circuit.
Before ordering, identify position 45 precisely on your machine's exploded parts diagram.
The Holzmann HOB305ABSSMW2 is also associated with an M5 × 10 fastening screw for securing carbide inserts to the cutterblock, depending on the compatible configuration.
This screw is also offered for the Bernardo PT305DS.
It can be used to replace a worn, damaged or missing screw.
Its main specifications are:
Thread: M5.
Specified length: 10 mm.
Function: Carbide insert fastening.
A fastening screw must be in perfect condition to hold the insert correctly.
A damaged head or thread can prevent proper tightening.
Before ordering, check the dimensions and specifications of the original screw.
Never use a screw that merely looks similar to secure a carbide insert.
Installation must follow the manufacturer's instructions, particularly regarding insert positioning and tightening.
Do not operate the machine if an insert is incorrectly secured.
The integrated dust extraction system of the Holzmann HOB305ABSSMW2 collects wood chips produced during surface planing and thicknessing.
Our selection includes a cotton filter bag for Holzmann HOB305ABS and HOB305ABSSMW2, also listed for the Bernardo PT305D and PT305DS models.
The filter bag helps collect extracted dust and wood chips.
Over time, it may become clogged or deteriorate.
Replacement may be necessary if it shows tears, damaged seams or deterioration that prevents proper use.
However, reduced extraction performance does not necessarily mean that the bag needs replacing.
Also check the condition of the impeller drive belt, whether the extraction circuit is blocked and whether the impeller is operating correctly.
Follow the manufacturer's recommendations for cleaning and maintaining the system.
Our category also includes various components associated with machine protection and chip evacuation.
These include a chip discharge housing and protective components offered for several planer thicknessers.
Depending on their design, these components help channel wood chips or protect certain mechanical parts.
A housing may need replacing if it is broken, cracked or if its fastenings are damaged.
However, the presence of a housing in this category does not automatically guarantee compatibility with every version of the Holzmann HOB305ABSSMW2.
Certain components are also listed for the Holzmann HOB260ABS or Bernardo PT305D models.
Before ordering, always check the list of compatible machines provided on the relevant product page.
The emergency stop switch is an essential component of the electrical control and safety system.
Our selection includes a replacement emergency stop switch intended for several Holzmann and Bernardo planer thicknessers in 230 V versions.
It allows the machine to be stopped quickly when a situation requires immediate intervention.
An emergency stop switch may need replacing if it is broken, damaged or no longer operates correctly.
Before ordering, check compatibility with your machine and the specifications of the original component.
Never operate your planer thicknesser if its emergency stop switch is defective.
Any work on the electrical circuit must be carried out with the machine unplugged and by a person with the necessary skills.
Our category includes a 15 A overload protector, position 194, intended for several Holzmann and Bernardo planer thicknessers in 230 V versions.
This device interrupts the electrical supply in the event of an overload or excessive current to help protect the motor and electrical circuit.
Its specifications are:
Rated current: 15 A.
Position: 194.
Intended for: Compatible 230 V machines.
An overload protector may need replacing if it is defective or no longer performs its function correctly.
However, repeated tripping does not necessarily mean that the protector itself is faulty.
It may indicate a mechanical overload, a motor problem or an electrical fault.
Before replacing this component, investigate the cause of the tripping.
Never bypass the overload protector or replace it with a device having different electrical specifications without technical approval.
Our selection also includes a KJD17B 230 V switch, position 106, offered in particular for several Holzmann and Bernardo planer thicknessers.
It is associated with the Holzmann HOB260ABS and HOB305ABS models, as well as the Bernardo PT260, PT260S, PT305D and PT305DS.
This switch can replace a defective or damaged component that no longer allows the machine to start.
Its specified reference is HPD10000036.
Important: the presence of this switch in the HOB305ABSSMW2 category does not, by itself, confirm compatibility with this version.
Before ordering, check that your exact model appears in the list of compatible machines.
Also check the markings on the original switch, the voltage, the number of terminals and their arrangement.
Never modify the machine's wiring to adapt an unsuitable switch.
Certain spare parts are shared by the Holzmann HOB305ABS and HOB305ABSSMW2 models.
These include several belts, drive chains, the motor pulley and the filter bag.
However, this partial compatibility does not mean that all parts from the two machines are interchangeable.
The HOB305ABSSMW2 version has specific references for certain components.
These include the infeed roller, position 52; the outfeed roller, position 70; the handwheel, position 96; and the chip deflector, position 45, which are also offered for the Bernardo PT305DS.
Components associated with the cutterblock must also be identified precisely.
Never order a part simply because it resembles one from an HOB305ABS.
Always check the list of compatible machines for each reference.
Several parts for the Holzmann HOB305ABSSMW2 are also offered for the Bernardo PT305DS.
These include:
Chip deflector, position 45.
Infeed roller, position 52.
Outfeed roller, position 70.
Adjustment handwheel, position 96.
22-link chain, position 158.
M5 × 10 carbide insert fastening screw.
This correspondence can make it easier to identify certain shared parts.
However, it must not be generalised to all components.
A part compatible with the Bernardo PT305DS is not automatically compatible with every version of the Holzmann HOB305ABS.
Dimensions, fastening systems and mechanical specifications may vary.
Only the list of compatible machines provided on each part's product page can confirm which models are supported.
Before ordering, start by identifying your machine precisely.
Record the information on its identification plate and consult the exploded parts diagram corresponding to your model.
Useful information includes:
Brand: Holzmann.
Exact model: HOB305ABSSMW2.
Supply voltage.
Serial number.
Month and year of manufacture.
Part position on the exploded diagram.
Manufacturer's reference.
Dimensions and specifications of the original component.
For a belt, check its marking and number of ribs.
For a chain, check the number of links and its position number.
For a roller, identify whether it is the infeed or outfeed roller.
For a handwheel, check position 96.
For a carbide insert screw, check the dimensions and specifications of the original component.
For an electrical component, check the voltage and markings on the original part.
WARNING: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also check your machine's month and year of manufacture and serial number.
Regular maintenance helps identify signs of wear and reduce the risk of breakdowns.
With the machine unplugged, periodically inspect accessible components in accordance with the manufacturer's instructions.
Pay particular attention to the condition of the belts, chains and pulleys.
Also check the operation of the infeed and outfeed rollers.
Irregular wood feeding may indicate a mechanical problem that requires inspection.
Check the integrated dust extraction system and remove accumulated wood chips using the recommended methods.
Inspect the filter bag and chip deflector.
On machines equipped with carbide inserts, check their condition and fastening in accordance with the manufacturer's instructions.
Electrical safety devices must remain fully functional.
Any fault involving the emergency stop switch or overload protector must be addressed before the machine is returned to service.
A localised fault does not necessarily require replacing your entire planer thicknesser.
A broken belt, worn chain, damaged roller, defective pulley or broken adjustment handwheel can be replaced individually when a compatible spare part is available.
However, it is essential to investigate the cause of the failure.
A belt that wears out quickly may indicate a pulley problem.
A broken chain may be the result of a mechanical blockage.
A roller that no longer feeds the wood correctly may also be affected by a transmission problem.
An overload protector that trips repeatedly may indicate a fault requiring a more thorough diagnosis.
A targeted repair, carried out after identifying the cause, allows you to retain components that are still functional and extend the service life of your machine.
At Probois Machinoutils, discover our selection of spare parts for the Holzmann HOB305ABSSMW2 planer thicknesser to maintain your machine and replace worn or damaged components.
Explore our transmission belts, 22-link and 53-link chains, motor pulley, infeed and outfeed rollers, adjustment handwheel, chip deflector and electrical components.
Each reference must be selected according to the exact model of your machine and the information provided on its product page.
Looking for a part that is not included in our selection?
Send us your machine's exact model, serial number and, if possible, the part's position number on the exploded diagram.
A photograph of the original component and the machine's identification plate may also help us identify it.
Order your Holzmann HOB305ABSSMW2 spare parts from Probois Machinoutils to maintain your planer thicknesser, carry out an appropriate repair and extend the service life of your equipment.
