Filter By

Price

Price

  • €3.00 - €95.00

Availability

Availability

Parkside Mobile Table Saw Parts

Parkside Mobile Table Saw Parts - Probois Machinoutils

Active filters

Parkside Portable Table Saw Spare Parts: Repair and Maintain Your Machine

Are you looking for a spare part for your Parkside portable table saw to repair your machine, replace a faulty component or extend its service life? At Probois Machinoutils, we offer a selection of replacement parts for certain Parkside portable table saws, including the Parkside PMTS 210 A1, subject to the compatibility information provided for each component.

Parkside portable table saws are popular among DIY enthusiasts thanks to their compact design, portability and versatility. They can be used for various woodworking tasks, including rip cuts, crosscuts and, depending on the machine's features, bevel cuts.

Over time and with repeated use, certain mechanical and electrical components may become worn, damaged or defective. A faulty switch, damaged blade guard, bent riving knife or motor problem can prevent the saw from operating correctly.

Replacing a defective component with a suitable spare part may help restore satisfactory operation without immediately replacing the entire machine.

This category brings together different spare parts for Parkside portable table saws, along with components used on certain Scheppach, Woodster, Kity and Dexter machines. Compatibility must always be checked individually for each reference.

Spare Parts for Parkside PMTS 210 A1 Portable Table Saw

The Parkside PMTS 210 A1 is a portable table saw designed for DIY and woodworking applications. Its compact format makes it suitable for use in different working environments, including small workshops and appropriately equipped job sites.

Like any electric circular saw, it contains several mechanical and electrical assemblies that contribute to its operation and the safety of the user.

When a fault occurs, it is important to identify its exact cause before ordering a replacement part.

The complete model designation should be checked on the machine's identification plate. The IAN number, when available, can also help identify the exact version of the machine.

Important: the presence of a component in this category does not necessarily mean that it is compatible with every Parkside portable table saw. Always consult the compatible models listed on the relevant product page.

Which Parkside Portable Table Saw Spare Parts Do We Offer?

Our catalogue includes several types of components that may be required for the maintenance and repair of certain compact table saws.

Available replacement parts include:

  • Circuit breaker for certain Scheppach, Woodster, Parkside and Dexter machines.
  • KJD17B-4 switch, 230 V, intended for the compatible models listed on its product page.
  • Motor armature for certain Scheppach HS80, TS205 and Woodster ST8 table saws.
  • Complete blade guard for certain compact table saw models.
  • Carbon motor brushes for several compatible machines, including certain mitre saws.
  • Riving knife reference 3901309003 for certain machines manufactured before August 2022.
  • Riving knife reference 3901309097 for certain machines manufactured from August 2022 onwards.
  • Table insert reference 3901309092 for certain Scheppach HS80 table saws.

These components are not universal. Some references are intended for specific machine models or manufacturing periods.

It is therefore essential to check compatibility before placing an order.

Switch for Parkside Portable Table Saw

The switch on a portable table saw controls the starting and stopping of the machine.

It is an important part of the electrical circuit and must operate correctly to allow the saw to be used under appropriate conditions.

A defective switch may prevent the machine from starting, cause intermittent operation or make it difficult to control the stopping of the motor.

Our selection includes a KJD17B-4 switch rated at 230 V, used on certain compact table saws.

Before replacing a switch, it is essential to check its reference, voltage, electrical specifications, connections and mounting system.

Two switches that look similar are not necessarily interchangeable.

Electrical component replacement should only be carried out by a person with the necessary technical knowledge, with the machine completely disconnected from the power supply.

Circuit Breaker and Electrical Protection for Table Saws

The circuit breaker plays an important role in the operation of certain electrical machines.

Depending on the equipment's design, it may help protect the electrical circuit against abnormal operating conditions, including overloads.

Our catalogue includes a circuit breaker intended for several Scheppach, Woodster, Parkside and Dexter machines, depending on the compatible models.

When a protective device trips repeatedly, it should not automatically be assumed that the circuit breaker itself is defective.

The problem may also result from excessive cutting resistance, a motor component, an electrical supply issue or a mechanical fault.

It is therefore important to identify the cause of the malfunction before replacing the electrical protection device.

An electrical safety device must never be bypassed or replaced with a component that does not meet the required specifications.

Blade Guard for Parkside Portable Table Saw

The blade guard is an essential safety component of a table saw.

Positioned above the circular saw blade, it helps reduce the risk of accidental contact with the rotating cutting tool during operation.

A broken, cracked or deformed blade guard, or one with damaged mounting components, must be inspected and replaced when necessary.

We offer a complete blade guard intended for certain Scheppach HS80, TS205 and Woodster ST8 table saws, with any additional compatibility information specified on the product page.

Before ordering a replacement guard, carefully check your machine's reference and the mounting characteristics.

It is also important to verify compatibility with the riving knife and the original blade protection system.

Never operate a table saw with a missing, damaged or deliberately disabled blade guard.

Riving Knife for Portable Table Saw

The riving knife is a safety component positioned behind the circular saw blade.

Its purpose is to help prevent the wood from closing around the rear of the blade during cutting.

It therefore contributes to reducing the risk of the workpiece being suddenly thrown back towards the operator, a dangerous phenomenon known as kickback.

A riving knife must have the correct dimensions and be properly positioned and aligned with the blade being used.

Our catalogue includes two references intended for certain Scheppach HS80, TS205 and Woodster ST8 table saws:

  • Reference 3901309003: for certain machines manufactured before August 2022.
  • Reference 3901309097: for certain machines manufactured from August 2022 onwards.

This distinction highlights the importance of checking the manufacturing date and exact version of the machine.

Two saws with the same commercial model name may use different components depending on their production period.

A riving knife should therefore never be selected solely on the basis of its appearance.

A bent, damaged or unsuitable riving knife must be replaced with a component that meets the machine manufacturer's specifications.

Motor Armature and Carbon Brushes for Circular Saws

The electric motor is one of the main components of a portable table saw.

It provides the power required to drive the blade at the speed specified by the manufacturer.

Depending on the motor design, certain internal components may be replaced separately.

Our catalogue includes a motor armature intended for certain Scheppach HS80, TS205 and Woodster ST8 table saws.

We also offer carbon motor brushes for various compatible machines, including certain mitre saws from Scheppach, Woodster, Dexter and Parkside.

These components must not be considered universal, as compatibility depends on the motor design and the exact machine reference.

A motor that no longer starts, produces unusual sparking or loses power may be affected by different faults.

The problem may involve the power supply, the switch, carbon brushes on motors equipped with them, or an internal motor component.

A proper diagnosis is essential before ordering a replacement part.

Table Insert for Circular Table Saw

The table insert is a component fitted around the blade opening on certain circular table saws.

It completes the working surface around the blade and helps provide a suitable opening for the blade to pass through the table.

When the insert becomes cracked, broken or deformed, replacement may be necessary to maintain an appropriate working surface.

We offer the table insert reference 3901309092 for certain Scheppach HS80 table saws.

Before ordering, check the insert's shape, dimensions, retention system and compatible machine models.

An unsuitable insert may not fit securely and must not be installed on a machine for which it was not designed.

Why Are Some Scheppach Spare Parts Listed in the Parkside Category?

Certain machines sold under the Parkside brand may share components with equipment marketed under other brand names.

This can occur when machines are based on similar designs or use identical mechanical and electrical components.

Our catalogue therefore includes replacement parts intended for several brands, including Parkside, Scheppach, Woodster, Kity and Dexter.

However, compatibility must always be verified individually.

A component designed for a Scheppach HS80 is not automatically compatible with a Parkside PMTS 210 A1.

Likewise, a similar external appearance does not guarantee that components from two different machines are interchangeable.

Dimensions, mounting points, electrical specifications and production changes may vary between models and manufacturing periods.

To avoid ordering an unsuitable component, always check the references and compatible models listed on the product pages.

How to Find the Correct Spare Part for Your Parkside Table Saw

To order a spare part compatible with your Parkside portable table saw, start by identifying your machine accurately.

Several details can help you find the correct replacement component:

  • Exact model: including Parkside PMTS 210 A1 if this is the reference shown on your machine.
  • IAN number: used on many Parkside products to identify a specific version.
  • Serial number: when available on the identification plate.
  • Manufacturing date: particularly important when components have changed during production.
  • Original part reference: indicated on the component or in the technical documentation.
  • Part position number: when an exploded parts diagram is available.
  • Dimensions and technical specifications: essential for checking mechanical or electrical compatibility.

For switches, check the voltage, connections and electrical characteristics.

For riving knives, verify the exact reference, dimensions and manufacturing period of the machine.

For table inserts and blade guards, the shape and mounting arrangements must match the original equipment.

A spare part that looks similar to the original component is not necessarily compatible with your machine.

Maintaining Your Parkside Portable Table Saw

Regular maintenance helps preserve cutting accuracy, mechanical reliability and safe operating conditions.

Portable table saws are frequently moved, installed and stored after use. It is therefore important to check their stability and the condition of their components regularly.

We recommend inspecting the following elements periodically:

  • The condition of the saw blade and its fastening components.
  • The correct operation of the blade guard.
  • The position and condition of the riving knife.
  • The operation of the switch and electrical protection devices.
  • The stability of the table and machine support.
  • The condition of the cutting guides.
  • The operation of adjustment mechanisms.
  • The condition of the power cable.
  • The cleanliness of sawdust extraction and evacuation areas.

Dust and sawdust accumulation can interfere with certain mechanisms and make adjustments more difficult.

Appropriate cleaning, carried out according to the manufacturer's recommendations, helps reduce these problems.

Before cleaning, adjusting or repairing the machine, always disconnect it from the electrical power supply and wait until the blade has completely stopped.

All safety devices must remain correctly installed and fully operational.

Repair Your Parkside Portable Table Saw Instead of Replacing It

A portable table saw that develops a fault does not necessarily need to be replaced with a new machine.

When the problem involves an identifiable and replaceable component, repairing the equipment may be a practical solution.

Replacing a switch, protective device, riving knife or mechanical component can help restore the machine's operation, provided that a compatible part is used.

This approach helps extend the service life of the equipment and reduces waste associated with premature machine replacement.

It may also be economically advantageous when the cost of repair remains reasonable compared with the value of the saw.

However, repairs must never compromise the operator's safety.

If the machine has a serious electrical fault, structural damage or a defective safety system, a thorough diagnosis is required before returning it to service.

Buy Parkside Portable Table Saw Spare Parts at Probois Machinoutils

Probois Machinoutils specialises in woodworking machinery, accessories and replacement parts for a wide range of brands.

We offer a selection of spare parts for Parkside portable table saws to help you maintain and repair your equipment.

Our range includes switches, electrical protection devices, blade guards, riving knives, motor components and table inserts for compatible machines.

Our catalogue also contains components used on certain Scheppach HS80, TS205 and Woodster ST8 table saws.

For every component, we recommend checking the compatibility information, technical references and, when necessary, the manufacturing date of your machine.

Whether you are looking for a spare part for a Parkside PMTS 210 A1 portable table saw or a component for another compatible compact table saw, carefully compare the specifications before ordering.

With the correct Parkside table saw replacement parts, you can carry out the necessary repairs, maintain your machine in good working condition and extend its useful life.