Pinion mark 225 for Jet JPT260, JPT310, JPT310HH-T thicknesser planer
Pinion for Jet JPT310 and JPT260 thicknesser planer
Pinion for Jet JPT310 and JPT260 thicknesser planer
Clamping wedge for Jet JPT-310 jointer, set of 3
Mechanical planing height indicator
Drive roller reference 82 for jet JPT310 planer thicknesser
Output roller mark 94 for Jet JPT-310 thicknesser planer
Special motor capacitor for wire start power 80uF - 450VAC
Bearing shell n° 95 for Jet JPT-260 and JPT-310 jointer
Belt for Jet jointer planer
Belt A-770 for Jet jointer planer
Chip collector for planer thicknesser
Original JET JPT310-408 locking support for JET JPT-260, JPT-310 and JPT-310HH planer thicknessers. Genuine replacement part designed to ensure proper locking, positioning and safe operation of machine components.
The JET JPT-310 jointer planer is a combined woodworking machine designed to perform two essential operations in carpentry and cabinetmaking: surface jointing and thickness planing.
Jointing allows woodworkers to produce flat surfaces and straight edges, while thickness planing ensures that timber is machined to a consistent thickness along its entire length.
With a 310 mm working width, the JET JPT-310 is suitable for professional woodworkers, carpenters, cabinetmakers and woodworking enthusiasts who need a versatile machine for preparing timber before assembly.
This jointer planer is available in different configurations, including the JET JPT-310-M single-phase version and the JET JPT-310-T three-phase version.
Some replacement components may be shared between these versions, while others depend on the motor configuration or the specific machine design.
Like any woodworking machine, the JET JPT-310 contains numerous mechanical and electrical components that are subject to wear over time.
Drive belts, gears, feed rollers, bearing supports, knife clamping components and dust extraction parts must remain in good condition to ensure reliable operation.
At Probois Machinoutils, we offer a selection of spare parts for the JET JPT-310 jointer planer to help you maintain, service and repair your woodworking equipment.
Replacing a worn or defective component can often extend the service life of your machine without requiring you to purchase a completely new jointer planer.
A jointer planer must maintain a high level of accuracy to produce flat surfaces, straight edges and timber with a consistent thickness.
During operation, the cutterblock rotates at high speed, while the feed mechanisms move the timber through the machine during thicknessing.
Vibrations, wood dust, chips and repeated mechanical loads can gradually cause wear to certain components.
Regular maintenance provides several benefits:
Helps maintain accurate jointing and thickness planing.
Preserves the quality of the finished timber surface.
Ensures smooth and reliable timber feeding.
Reduces unusual vibrations and operating noises.
Helps prevent premature wear of belts and gears.
Reduces the risk of mechanical failures.
Maintains the correct operation of adjustment mechanisms.
Extends the service life of the machine.
Replacing a worn or damaged JET JPT-310 spare part is often a cost-effective way to restore your machine's performance.
The JET JPT-310 contains several mechanical assemblies responsible for cutterblock operation, power transmission, timber feeding and machine adjustments.
Depending on the available product references, different components can be replaced during maintenance or repair.
Drive Gears for JET JPT-310
Drive gears for the JET JPT-310 jointer planer transmit mechanical movement between the machine's operating mechanisms.
They play an important role in the feed system used during thickness planing.
A worn or damaged gear may cause unusual noises, feeding difficulties or irregular operation.
Among the replacement components available is drive gear item 225, compatible with several JET jointer planer models, including the JPT-260, JPT-310 and certain JPT-310HH-T versions.
Before ordering, it is essential to verify the part reference and compatibility with your specific machine.
Drive Belts for JET JPT-310
Drive belts for the JET JPT-310 jointer planer transfer mechanical power between the machine's various operating components.
They are essential for reliable operation and may gradually wear out over time.
A stretched, worn or damaged belt may cause vibrations, reduced drive performance or unusual noises.
Replacement belt references associated with this category include:
The A-1194Li drive belt for the JET JPT-310 jointer planer.
The A-770 drive belt, used for the thicknessing feed drive on certain JET JPT-310 versions.
Please note that some drive belts may differ between single-phase and three-phase versions. Always verify the original part reference before ordering.
Feed Roller – Item 82
The JET JPT-310 feed roller, item 82, helps move timber through the machine during thickness planing.
Its function is to contribute to consistent and reliable timber feeding.
A worn or damaged roller may cause feeding difficulties, irregular movement or marks on the timber surface.
Replacing a defective feed roller can help restore smooth and consistent operation.
Outfeed Roller – Item 94
The JET JPT-310 outfeed roller, item 94, helps transport timber towards the machine's exit during thicknessing.
It contributes to maintaining a consistent feed movement throughout the planing process.
A worn, deformed or damaged roller may interfere with timber movement and affect the quality of the finished work.
It is important to inspect its condition along with the other components of the feeding mechanism.
Bearing Supports and Mechanical Components
Bearing supports help hold and guide certain shafts and rotating components inside the machine.
They contribute to correct mechanical alignment and smooth operation.
A worn or damaged bearing support may cause excessive play, vibrations or unusual noises.
Among the replacement components associated with these machines is a bearing support for JET JPT-260 and JPT-310, identified as item 95 in its product description.
For this type of component, it is particularly important to verify the exact item number in your machine's exploded parts diagram.
Planer Knife Clamping Wedges
Knife clamping wedges for the JET JPT-310 secure the planer knives in position on the cutterblock.
These components play an essential role in holding the cutting tools correctly.
A damaged, deformed or defective clamping wedge may compromise the secure positioning of the knives.
This category includes a set of three knife clamping wedges for the JET JPT-310.
Knife installation and the assembly of all clamping components must always follow the manufacturer's instructions.
Dust Collection Hood for JET JPT-310
The JET JPT-310 dust collection hood directs the wood chips produced during machining towards the extraction system.
Effective chip removal contributes to proper machine operation and reduces the accumulation of waste around mechanical components.
A damaged or incorrectly positioned dust collection hood may reduce extraction efficiency.
Keeping this component in good condition is therefore important for effective dust collection.
Mechanical Thickness Height Indicator
The mechanical thickness height indicator allows the operator to read the thickness setting during planing.
A damaged or inaccurate indicator may make adjustments more difficult and lead to incorrect readings.
Replacing this component can help restore convenient and accurate machine adjustment, provided that compatibility with the specific model has been confirmed.
Locking Bracket JET JPT310-408
The JET JPT310-408 locking bracket is a mechanical component involved in securing and locking certain parts of the machine.
It is referenced for several JET jointer planer models, including the JPT-260, JPT-310 and JPT-310HH.
A damaged bracket may interfere with the correct locking or positioning of the associated components.
Before replacement, the exact part number and compatibility must be checked.
Several symptoms may indicate that a JET JPT-310 replacement part requires inspection or replacement.
Timber does not feed correctly during thicknessing
A problem with the feed roller, drive gear or transmission belt may interfere with timber movement.
Dirty tables or incorrect adjustments can also cause feeding difficulties.
The machine produces unusual noises
Mechanical noises may be caused by a worn gear, damaged bearing support, defective belt or loose component.
Stop the machine immediately and identify the source of the problem before continuing work.
The planing quality deteriorates
Blunt or incorrectly positioned planer knives, as well as irregular timber feeding, may cause marks, waves or surface defects.
The knives, clamping components and feeding mechanisms should be inspected.
The machine lacks power
Reduced cutting performance may be caused by worn knives, excessive cutting depth, a transmission problem or an unsuitable electrical supply.
For single-phase versions, an extension cable that is too long or has an insufficient conductor cross-section may also cause a voltage drop.
If an extension cable is necessary, we generally recommend a 2.5 mm² cable, no longer than 10 metres and fully unwound, provided that it complies with the manufacturer's instructions and the electrical installation requirements.
The thickness adjustment becomes difficult
A dirty mechanism, worn component or incorrect adjustment may make it difficult to raise or lower the thicknessing table.
Appropriate inspection and maintenance may sometimes resolve the problem without replacing any parts.
When ordering a replacement part for the JET JPT-310 jointer planer, it is essential to identify the exact machine configuration.
The model is available in different versions, including the JPT-310-M single-phase and JPT-310-T three-phase machines.
Some components may be common to both versions, while others differ according to their technical specifications.
Before ordering, check:
The exact model of your JET jointer planer.
Whether your machine is single-phase or three-phase.
The serial number, when required.
The original manufacturer part number.
The item number shown in the exploded parts diagram.
The dimensions and technical specifications of the component.
The compatibility information provided on the product page.
Please note that JET JPT-310 spare parts are not automatically compatible with the JET JPT-310HH, JPT-260 or JPT-410.
Even when certain components are shared between models, each part reference must be checked individually.
Regular preventive maintenance helps preserve the accuracy and performance of your woodworking machine.
After each use, remove accumulated wood chips and dust from accessible areas.
The jointing and thicknessing tables should be kept clean to allow timber to move smoothly through the machine.
Applying a suitable woodworking machine table lubricant can help reduce friction and improve timber feeding, provided that it does not leave residues that interfere with subsequent finishing operations.
Regularly inspect the condition of the planer knives, drive belts, feed rollers and fastening components.
The adjustment and locking mechanisms should also be checked to ensure that they operate correctly.
Using an appropriate wood chip extraction system helps prevent excessive waste accumulation inside the machine and contributes to a cleaner working environment.
Before carrying out any cleaning, adjustment or repair work, disconnect the machine completely from the electrical power supply and wait until all moving parts have stopped.
Never operate the jointer planer with missing or damaged safety guards.
A mechanical failure does not necessarily mean that your jointer planer needs to be replaced.
In many cases, replacing a damaged gear, worn drive belt, defective feed roller, bearing support or another component can restore normal operation.
Repairing your existing machine offers several advantages.
It can reduce costs, prevent premature equipment replacement and allow you to continue using a machine whose settings and operating characteristics you already know.
However, repairs must be carried out using parts compatible with the JET JPT-310 and in accordance with the manufacturer's recommendations.
When a repair involves electrical components, the cutterblock or safety devices, professional assistance may be necessary.
Maintaining and repairing existing equipment also helps reduce unnecessary waste and extends the useful life of woodworking machinery.
Probois Machinoutils specialises in woodworking machinery, workshop equipment, accessories and spare parts for a wide range of machines.
Our JET JPT-310 jointer planer spare parts category helps professional woodworkers and DIY enthusiasts find the components required to maintain and repair their equipment.
Depending on availability, you may find drive belts, gears, feed rollers, outfeed rollers, bearing supports, knife clamping wedges, dust collection components and locking brackets.
We also offer dedicated spare parts categories for other JET jointer planer models, including the JPT-8B, JPT-10B, JPT-260, JPT-310HH and JPT-410.
Before placing an order, carefully review the technical specifications and compatibility information provided on each product page.
If you are unsure which component you need, our team can help you identify the correct replacement part using your machine model, serial number and original part reference.
Maintain and repair your JET JPT-310 jointer planer with spare parts from Probois Machinoutils to preserve cutting accuracy, machine performance and long-term reliability.