Rod operating the flywheel of the circular saw Holzmann TS200
Turning pole for the circular saw Holzmann TS200
Riving knife for table saw
Protective cap for circular and combination saws as Holzmann TS200
Pulley for circular saw Holzmann TS250, Holzmann TS200 and Bernardo TK200
Rail guide locking bracket for handset and saw
Riving knife for table saw
Parallel guide for Holzmann TS200 circular saw (from 09/2021)
Sawing and spindle moulding sliding table featuring a 400 x 250 mm table, an extendable fence and a vertical hold-down clamp. Compatible with numerous Kity, Scheppach, Woodster, Bernardo and Holzmann circular saws, spindle moulders and combination woodworking machines.
Are you looking for spare parts for your Holzmann TS200 table saw? At Probois Machinoutils, discover our selection of components and accessories designed to help you maintain your machine, replace worn parts and repair damaged components.
The Holzmann TS200 is a table saw designed for woodworking. With suitable accessories and correct adjustments, it can be used for various cutting operations, including rip cuts and crosscuts.
Over time, certain mechanical components may wear out, become misaligned or suffer damage. A damaged drive belt, a rip fence that no longer locks correctly or a faulty blade adjustment mechanism can affect cutting accuracy.
Safety devices also require particular attention.
To help you maintain your table saw, we offer various replacement parts, including a 406J5 Poly-V belt, riving knives, blade guard, motor pulley, rip fence, adjustment components and sliding table accessories.
Discover the main spare parts available, their functions and the checks you should carry out before ordering.
Our selection includes several types of components intended for the maintenance and repair of your table saw.
Blade adjustment components
We offer a shaft for the adjustment handwheel and its corresponding nut. These components form part of the machine's adjustment mechanism.
Drive components
This category includes a 406J5 Poly-V belt and a motor pulley intended for the Holzmann TS200 and TS250 table saws, as well as the Bernardo TK200.
Safety components
You will find two versions of the riving knife for the Holzmann TS200, depending on the machine's manufacturing date, together with a blade guard intended for circular saws equipped with a 200 mm blade.
Guides and sliding table accessories
We also offer a fence locking bracket, a rip fence for certain versions of the TS200, a 1000 mm sliding table rail and a sliding table accessory suitable for various compatible woodworking machines.
Each component has its own specifications and compatibility requirements.
It is therefore important to check the information provided on each product page before placing your order.
The 406J5 Poly-V belt is one of the drive components offered in this category.
A drive belt transmits movement between the pulleys of the relevant mechanism.
Over time, it may wear due to regular operation, mechanical stress or unsuitable tension.
A damaged belt can cause unusual noises, vibrations or irregular power transmission.
When a belt develops cracks, damaged ribs or significant wear, replacement may become necessary.
Before ordering, it is essential to check the markings on your original belt.
The 406J5 designation identifies the standardised characteristics of this Poly-V belt.
A belt that appears to have similar dimensions is not necessarily interchangeable.
Always check the specifications of your original belt and the compatibility information provided on the product page.
The motor pulley for the Holzmann TS200 is part of the machine's drive system.
It transfers movement from the motor to the drive belt.
A pulley in good condition contributes to proper power transmission, provided that the other components are correctly installed and adjusted.
A pulley may need replacing if it shows mechanical damage, deformation or significant wear on its contact surfaces.
Incorrect pulley alignment can also cause premature belt wear.
Before replacing the pulley, inspect the entire drive mechanism.
The pulley offered in this category is intended for the Holzmann TS200 and TS250 table saws, as well as the Bernardo TK200, in accordance with the compatibility information on its product page.
Do not assume that a pulley designed for another model is compatible simply because it looks similar.
The riving knife is an essential safety component on a table saw.
It is positioned behind the blade and helps reduce the risk of the wood closing around the rear section of the blade.
It therefore contributes to reducing the risk of kickback during certain sawing operations.
For the Holzmann TS200, we offer two different versions of the riving knife.
Riving knife for Holzmann TS200 manufactured before September 2021
This version is intended for machines manufactured during the period specified on its product page.
Riving knife for Holzmann TS200 manufactured from September 2021 onwards
This second version is intended for machines manufactured from September 2021 onwards, according to the manufacturer's compatibility information.
This distinction is particularly important.
Two machines with the same commercial model name may have technical differences depending on their manufacturing date.
Before ordering your riving knife, always check the manufacturing month and year of your table saw.
If necessary, also record its serial number.
Never install a riving knife whose dimensions, mounting system or technical characteristics do not match your machine and the blade being used.
During sawing, wood can exert pressure on the blade.
In certain situations, the workpiece may close behind the blade and cause it to become pinched.
The riving knife helps maintain an appropriate gap behind the blade, reducing this risk.
To perform its function correctly, it must be compatible with the machine and suitable for the specifications of the installed blade.
Its thickness and positioning are particularly important.
A bent, incorrectly secured or unsuitable riving knife must not be used.
If you notice any damage, stop the machine and carry out the necessary checks.
For your Holzmann TS200, always select the version corresponding to your machine's manufacturing period.
The blade guard for table saws equipped with a 200 mm blade is another replacement part offered in this category.
This safety device is designed to cover the upper section of the blade under the operating conditions specified by the manufacturer.
It helps reduce the risk of accidental contact with the rotating blade.
A damaged or cracked blade guard, or one with deteriorated mounting components, may need replacing.
Before ordering, check that the proposed model is compatible with your saw's mounting system.
The blade diameter alone is not sufficient to guarantee compatibility.
The dimensions and mounting arrangements must also match your machine.
Never operate your saw with a damaged or incorrectly installed blade guard.
A table saw's adjustment mechanism consists of several mechanical components.
The shaft and nut offered in this category form part of the Holzmann TS200 adjustment system.
Over time, certain threaded components may develop wear, deformation or damage.
An adjustment mechanism that becomes difficult to operate, develops excessive play or jams may require inspection.
However, adjustment problems do not necessarily originate from the shaft or its nut.
Sawdust accumulation, misalignment or another mechanical component may also be responsible.
Before replacing a part, inspect the entire mechanism.
During installation, follow the manufacturer's instructions and check that the adjustment system operates correctly before putting the machine back into service.
The rip fence for the Holzmann TS200 is designed to guide the workpiece during rip-cutting operations.
A correctly positioned fence helps produce consistent cuts and maintain a constant distance between the workpiece and the blade.
The model offered in this category is intended for Holzmann TS200 machines manufactured from September 2021 onwards.
This information must be taken into account before ordering.
A rip fence designed for a newer version is not necessarily compatible with an older machine.
The mounting and locking systems may differ.
If your rip fence is bent, damaged or can no longer be locked securely, replacement may be necessary.
Before ordering, check your machine's manufacturing date and the compatibility information provided on the product page.
The fence locking bracket forms part of the table saw's guiding system.
It helps position and secure the corresponding fence.
A damaged bracket may prevent the fence from being held securely or locked correctly.
In this situation, it is important to identify the exact component responsible for the problem.
A locking problem may also result from incorrect adjustment, damaged fastening components or another part of the mechanism.
The bracket offered in this category is intended for several machines, including the Scheppach TS82 and Holzmann TS200 table saws.
Before ordering, check the compatibility information on the product page.
The 1000 mm sliding table rail offered in this category is intended for various woodworking machines.
It acts as a supporting and guiding component for the corresponding sliding table.
A damaged or bent rail may affect the smooth movement of the sliding table.
However, difficulties with sliding movement can also originate from rollers, bearings or incorrect adjustment.
Before replacing the rail, it is therefore advisable to inspect the entire guiding system.
As this rail is offered for several machine models, always check its compatibility with your equipment.
An identical length does not guarantee that two rails are interchangeable.
Our selection also includes a sliding table accessory equipped with an extendable fence.
This accessory is intended for various compatible table saws, spindle moulders and combination woodworking machines.
It features a 400 × 250 mm support table, an extendable fence and a screw clamp.
A sliding table helps guide the movement of the workpiece during certain cutting operations.
It can make positioning and securing workpieces easier when correctly installed and used with a suitable machine.
Sliding table compatibility depends on several factors, including the mounting system, dimensions and machine configuration.
Before ordering this accessory for your Holzmann TS200, carefully consult the list of compatible machines and the installation requirements provided on its product page.
An inaccurate cut does not necessarily mean that a machine component is defective.
Several factors can affect cutting precision.
Start by inspecting the condition of the saw blade.
A blunt, damaged or unsuitable blade can produce unsatisfactory cutting results.
Next, check the position of the rip fence.
An incorrectly adjusted fence can cause guiding difficulties and affect cutting quality.
Also inspect the machine's adjustment mechanisms.
If the adjustment handwheel is difficult to operate or has excessive play, its components may need to be checked.
Finally, make sure that all safety devices are correctly installed and that the machine is being used in accordance with the manufacturer's recommendations.
Unusual noises coming from your table saw can have several causes.
A damaged drive belt may produce abnormal noises during operation.
A damaged or misaligned pulley can also interfere with power transmission.
However, unusual noises may also originate from other mechanical components.
It is therefore important not to replace the belt or pulley automatically without carrying out the necessary checks.
If your machine develops significant vibrations, abnormal overheating or unusual noises, stop using it immediately.
Disconnect it from the power supply before inspecting it and consult a qualified professional if necessary.
Regular maintenance helps preserve the accuracy and proper operation of your table saw.
Before carrying out any work, disconnect the machine from the power supply and wait until the blade has stopped completely.
Regularly clean accessible areas to prevent excessive sawdust and dust accumulation.
Inspect the condition of the blade and all safety devices.
Also check that the rip fence and its locking mechanism are working correctly.
If your machine is equipped with a sliding table, check that it moves smoothly.
Difficult sliding movement may require inspection of the rail and other guiding components.
Finally, pay attention to unusual noises and any changes in the behaviour of the drive system.
Prompt replacement of a worn or damaged component may help prevent more extensive damage.
Before ordering a replacement part, it is essential to identify your machine accurately.
We recommend recording the following information:
Brand: Holzmann.
Exact model: TS200.
Serial number.
Manufacturing month and year.
Original part reference, if available.
Position number on the exploded diagram, where indicated.
Particular attention must be paid to machines manufactured before and from September 2021 onwards.
This distinction applies in particular to the two versions of the riving knife offered in this category.
The rip fence presented here is also intended for machines manufactured from September 2021 onwards.
For the drive belt, check the 406J5 marking.
For all other components, always check the part references and compatibility information provided on each product page.
IMPORTANT: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part product page. Where necessary, also check your machine's manufacturing month, manufacturing year and serial number.
A component that looks similar to the original part is not necessarily interchangeable.
A localised fault does not necessarily require you to replace your entire table saw.
When a problem originates from a worn belt, a damaged pulley or a component of the adjustment mechanism, replacing the affected part may allow you to repair the machine.
Similarly, a damaged rip fence or locking component can be replaced independently of the other parts, provided that a suitable replacement is available.
Repairing your equipment can therefore extend its service life when its overall condition justifies doing so.
However, an accurate diagnosis remains essential.
Replacing a component that is not responsible for the malfunction will not solve the problem.
For safety devices, only use components suitable for your machine and follow the manufacturer's instructions.
At Probois Machinoutils, discover our selection of spare parts for maintaining and repairing your Holzmann TS200 table saw.
We offer blade adjustment components, a 406J5 Poly-V belt, a motor pulley, riving knives suitable for different manufacturing periods, a blade guard, guiding components and sliding table accessories.
Before ordering, make sure you identify the exact version of your machine, particularly when compatibility depends on its manufacturing date.
Are you looking for another spare part for your Holzmann TS200?
Send us your machine's exact model, serial number, manufacturing date and, if possible, the position number of the required component on the exploded diagram to help us identify the correct part.
Probois Machinoutils: your specialist in Holzmann machine spare parts, helping you maintain, repair and extend the service life of your TS200 table saw.
