Spare parts for Parkside PKO 270 A2 compressor

Spare parts for Parkside PKO 270 A2 compressor - Probois Machinoutils

Active filters

Parkside PKO 270 A2 Air Compressor Spare Parts: Repair and Maintain Your Machine

Are you looking for a spare part for your Parkside PKO 270 A2 air compressor to repair your equipment or replace a worn component? At Probois Machinoutils, we offer a selection of replacement parts designed to maintain and repair your Parkside PKO270A2 compressor.

The Parkside air compressor is a versatile piece of equipment used in garages, workshops and for various DIY projects. It can be used for inflating tyres, blowing operations and powering certain pneumatic accessories compatible with its technical specifications.

Over time, some components may experience normal wear. Compression cycles, vibrations, temperature changes and mechanical stresses can gradually affect the operation of the machine.

A loss of pressure, an air leak, a regulation fault or a mechanical problem does not necessarily mean that the entire compressor needs replacing. Once the cause has been correctly identified, replacing the affected component may restore normal operation.

This category brings together various replacement parts for the Parkside PKO 270 A2 compressor, including a pressure regulator, pressure switch, connecting rod, gaskets, safety valve, pressure gauge, air filter, plugs and pneumatic accessories.

How to Identify Your Parkside PKO 270 A2 Compressor

Before ordering a spare part for Parkside PKO 270 A2 compressor, it is essential to check the exact reference of your machine.

Several Parkside compressors have very similar model names: PKO 270 A1, PKO 270 A2, PKO 270 A3, PKO 270 A4 and PKO 270 A5.

These different versions may share certain components but can also have differences in connections, mechanical parts, pneumatic circuits and control elements.

A part intended for the PKO 270 A1 is therefore not automatically compatible with the PKO 270 A2.

To correctly identify your equipment, check its identification plate and record the following information:

  • The Parkside brand name.
  • The exact PKO 270 A2 model reference.
  • The IAN number, where indicated.
  • The machine's serial number.
  • The part position number shown in the exploded parts diagram.

The Parkside PKO 270 A2 exploded parts diagram is particularly useful for locating the component that needs replacing.

Some parts may also be fitted to Scheppach or Woodster compressors. However, the manufacturer's references must always be compared before ordering.

Pressure Regulator for Parkside PKO 270 A2 Compressor

The pressure regulator for Parkside PKO 270 A2 compressor allows the outlet pressure to be adjusted according to the requirements of the pneumatic tool being used.

It plays an important role in compressor operation because not all pneumatic accessories require the same supply pressure.

Our catalogue includes a pressure regulator specifically offered for the Parkside PKO270A2 compressor.

A faulty regulator may cause several problems:

  • Difficulty adjusting the outlet pressure.
  • Unstable pressure during use.
  • An air leak around the regulator.
  • Inability to maintain the desired setting.

These symptoms may also be caused by a defective pressure gauge or pneumatic fitting. It is therefore recommended to inspect the circuit before replacing the regulator.

To ensure proper operation, the replacement component must meet the technical specifications and connection requirements established by the manufacturer.

Pressure Switch for Parkside Compressor: Controlling Motor Start and Stop

The Parkside compressor pressure switch is involved in the automatic control of the motor.

Its function is to control compressor operation according to the pressure inside the receiver tank, based on the thresholds defined by the manufacturer.

When pressure reaches the specified cut-out threshold, the system normally stops compression. When pressure drops to the restart threshold, the motor can start again.

Our selection includes pressure switch reference 3906129013, offered for various Scheppach, Zipper and Parkside compressors according to the stated compatibility information.

A pressure switch malfunction may result in:

  • A compressor that no longer starts automatically.
  • A motor that does not stop at the expected pressure.
  • Irregular compression cycles.
  • An electrical control fault.

However, these symptoms may also be related to the motor, electrical supply, capacitor or another control component.

A pressure switch must never be modified or adjusted without following the manufacturer's specifications. Any work on this electrical and pneumatic component must be carried out by a competent person.

Connecting Rod for Parkside PKO 270 A2 Compressor

The compressor connecting rod is a mechanical component that helps convert the motor's rotary movement into the reciprocating movement of the piston.

It therefore plays an essential role in the compression system.

Our catalogue includes a connecting rod for various Scheppach and Parkside compressors, whose compatibility must be checked against the exact machine reference.

A damaged connecting rod may cause abnormal mechanical noises, excessive vibrations or a blockage of the mechanism.

Failure of this component may result from several causes, including mechanical wear, insufficient lubrication where required, excessive overheating or damage affecting the moving assembly.

Before replacing the connecting rod, it is important to inspect the other mechanical components, particularly the piston, joints and contact surfaces.

This type of mechanical repair requires appropriate technical knowledge. The compressor must not be returned to service if the mechanism is stiff, blocked or visibly damaged.

O-Ring for Parkside and Scheppach Compressors

The O-ring for Parkside compressor helps maintain airtight sealing in certain mechanical or pneumatic assemblies.

Our selection includes O-ring reference 5906103066, offered for various Scheppach and Parkside compressors.

This type of seal is generally used to limit air or fluid leakage between two assembled surfaces, depending on its position in the machine.

Over time, an O-ring may lose elasticity, become deformed or deteriorate under operating stresses.

A localised leak may then develop around the affected assembly.

When replacing an O-ring, it is essential to check its internal diameter, cross-sectional diameter and material, as well as its suitability for the operating conditions.

A seal that looks similar but has different dimensions may not provide proper sealing.

Crankcase Gasket for Parkside PKO 270 A2 Compressor

The compressor crankcase gasket helps maintain sealing between the relevant sections of the mechanical housing.

Our catalogue includes crankcase gasket reference 5906107008, corresponding to position 18 on certain exploded parts diagrams.

Its stated dimensions are 178 x 133 x 4.3 mm.

This component is offered for various Parkside, Scheppach and Manupro compressors according to the compatible models.

A crankcase gasket may need replacing when it is torn, compressed, hardened or damaged during disassembly.

During repair, the contact surfaces must be clean and free from residues that could interfere with sealing.

It is also important to follow the manufacturer's assembly instructions and avoid using unsuitable sealing compounds.

Gasket Support Plate for Parkside Compressor

The compressor gasket support plate is part of the assembly of certain components in the compression system.

Our catalogue offers a gasket support plate for various Scheppach, Woodster and Parkside compressors.

This part corresponds to position 48 on certain Scheppach HC50 compressor exploded parts diagrams.

It must be selected according to the machine references and the configuration of the mechanical assembly.

A damaged or deformed plate, or one with deteriorated contact surfaces, may interfere with the sealing or operation of the relevant assembly.

Before replacing it, it is recommended to inspect the associated gaskets and contact surfaces.

Safety Valve for Parkside PKO 270 A2 Compressor

The Parkside compressor safety valve is an essential device for protection against overpressure.

It must have specifications that comply with the requirements of the compressed air circuit and the manufacturer's instructions.

Our catalogue includes safety valve reference 5906101094, which replaces the previous reference 5906115059.

This valve is offered for several Scheppach, Woodster and Parkside compressors according to the compatibility information.

A safety valve may need replacing if it develops abnormal leakage, visible damage or a confirmed malfunction.

If it opens repeatedly during operation, it is also necessary to investigate a possible fault in the pressure switch or pressure control system.

A safety valve must never be blocked, bypassed or modified. Its replacement must comply with the pressure rating specified for the machine.

Pressure Gauge for Parkside Compressor: Monitoring Air Pressure

The Parkside compressor pressure gauge allows the user to visually monitor air pressure in the circuit to which it is connected.

Depending on its position, it may indicate receiver tank pressure or the pressure available at the regulator outlet.

Our selection includes a pressure gauge for Scheppach, Woodster and Parkside compressors, corresponding to position 55 on certain exploded parts diagrams.

A faulty pressure gauge may have a stuck needle, display inconsistent readings or develop a leak around its connection.

Before ordering a replacement, check the dial dimensions, connection position, thread and measuring range.

A pressure gauge in good condition makes adjustments easier and contributes to the appropriate use of pneumatic accessories.

Air Filter for Parkside PKO 270 A2 Compressor

The air filter for Parkside PKO 270 A2 compressor helps protect the compression system from dust and airborne particles.

Our catalogue includes an air filter for Parkside PKO 270 A1 and PKO 270 A2 compressors, also offered for certain Scheppach HC50S, HC51 and HC80V models.

Over time, the filter may become clogged and reduce the airflow entering the compressor.

A heavily obstructed filter may contribute to reduced compression performance.

It is advisable to check its condition regularly, particularly when the compressor is used in a dusty environment.

A torn, deformed or excessively dirty filter that cannot be cleaned properly should be replaced according to the manufacturer's recommendations.

The compressor should not be operated without its filter when one is specified by the manufacturer.

Drain Plug and Oil Plug for Parkside Compressor

The compressor drain plug allows accumulated condensate to be removed from the receiver tank, according to the operating instructions.

Our catalogue includes drain plug reference 5906101066, also associated with reference 10003185, with a stated diameter of 16.6 mm.

This component is offered for various Scheppach, Woodster and Parkside compressors.

A damaged drain plug may cause air leakage or make it difficult to close the drain opening correctly.

The category also includes an oil plug for Scheppach and Parkside compressors, as well as an oil level plug offered for certain Scheppach and Woodster models.

These components must be selected according to the exact configuration of the machine. The presence of a plug in this category does not mean it is suitable for every compressor version.

Draining and lubrication checks must always be carried out in accordance with the manufacturer's instructions.

15 Metre Compressed Air Hose for Parkside Compressor

To use your compressor with different pneumatic accessories, you need a suitable compressed air hose.

Our selection includes compressed air hose reference 7906100711, with a length of 15 metres and a stated diameter of 8 mm.

This hose is offered for various Scheppach and Parkside compressors according to the compatibility lists.

A pneumatic hose connects the compressor to a compatible accessory while providing freedom of movement around the workshop.

Before selecting a hose, check its maximum permissible pressure, diameter, fittings and the airflow requirements of the equipment being used.

A hose showing cracks, significant deformation or air leaks should be replaced.

Why Does My Parkside PKO 270 A2 Compressor No Longer Start?

A Parkside PKO 270 A2 compressor that no longer starts may have several electrical, pneumatic or mechanical faults.

The pressure switch may be involved, but it should not be considered defective without appropriate checks.

Other possible causes include an incorrect electrical supply, a triggered thermal protection device, a faulty capacitor or a blocked mechanism.

If the motor makes an unusual noise or appears to struggle without rotating, testing should be stopped immediately.

A mechanical fault affecting the connecting rod or another moving component may require a thorough inspection.

Electrical checks and work on pressurised components must be carried out by a qualified person.

Why Is My Parkside PKO 270 A2 Compressor Not Building Pressure?

A Parkside PKO270A2 compressor that no longer builds pressure may have an air leak or a problem with its compression system.

Several symptoms may help identify the fault:

  • The motor runs, but pressure increases slowly.
  • The compressor no longer reaches its usual pressure.
  • An air leak can be heard around a fitting.
  • The receiver tank loses pressure after shutdown.
  • The outlet pressure remains unstable despite adjusting the regulator.

These problems may be related to a damaged gasket, a component of the compression system, a pneumatic fitting or a pressure regulation device.

A suitable diagnosis is essential to identify the actual cause and avoid replacing several parts unnecessarily.

How to Choose the Correct Spare Part for Parkside PKO 270 A2

To order a spare part compatible with your Parkside PKO 270 A2 compressor, several checks are recommended.

  • Check the model: confirm the PKO 270 A2 reference on the identification plate.
  • Record the IAN number: useful for identifying certain production variations.
  • Consult the exploded parts diagram: locate the component's position number.
  • Compare references: check manufacturer part numbers and any replacement references.
  • Check dimensions: particularly for gaskets, fittings and plugs.
  • Verify technical specifications: especially for pressure switches, regulators and safety valves.

A visually identical part is not necessarily interchangeable. Differences in threads, dimensions or electrical and pneumatic specifications may prevent installation or compromise operating safety.

Maintain Your Parkside PKO 270 A2 Compressor to Extend Its Service Life

Regular maintenance helps preserve compressor performance and reduce the risk of certain breakdowns.

It is recommended to periodically inspect the air filter, pneumatic fittings, accessible gaskets and protective components.

Condensate must be drained according to the operating manual to limit moisture accumulation inside the receiver tank.

On models requiring lubrication, the oil level and condition must be checked according to the manufacturer's recommendations.

It is also important to monitor unusual mechanical noises, excessive vibrations and abnormal pressure behaviour.

Before any maintenance operation, disconnect the compressor from the electrical supply, allow it to cool and ensure that the relevant circuits are completely depressurised.

The compressed air receiver tank must never be drilled, welded or repaired using improvised methods. Safety devices must never be bypassed.

Buy Parkside PKO 270 A2 Compressor Spare Parts at Probois Machinoutils

Probois Machinoutils specialises in the sale of machinery, workshop equipment, accessories and spare parts for numerous brands.

We offer a developing selection of spare parts for Parkside PKO 270 A2 air compressors to help you maintain and repair your equipment.

Our catalogue includes a pressure regulator for PKO270A2, a pressure switch, a connecting rod, O-rings, a crankcase gasket, a gasket support plate, a safety valve, a pressure gauge, an air filter, various plugs and a 15 metre compressed air hose.

Part availability may change depending on manufacturer supplies.

Before ordering, carefully read the product descriptions and compare the references with those of your machine.

Whether you are looking for a connecting rod for Parkside PKO 270 A2 compressor, a replacement gasket, a pressure switch, a pressure regulator or an air filter, our selection helps you identify the components required to repair your equipment.

By choosing a suitable replacement part and following the manufacturer's recommendations, you can help extend the service life of your Parkside PKO 270 A2 compressor while maintaining its performance.