Carbon brushes for vertical compressor Scheppach, Dexter and Aircase
Carbon brushes for vertical compressor Scheppach, Dexter and Aircase
Carbon brushes for vertical compressor Scheppach, Dexter and Aircase
Belt for vertical compressor Scheppach, Dexter and Aircase
Air filter for Scheppach HC51V compressor and Parkside PVKO50B2
Compressed air hose, part number 7906100711, 8 mm diameter, 15 meters long, for Scheppach and Parkside compressors (see the following list: LIST OF COMPATIBLE MACHINES)
Bleed screw, part number 5906125020, for various Scheppach and Parkside compressors according to the following list : LIST OF COMPATIBLE MACHINES
Are you looking for a spare part for your Parkside PVKO 50 B2 vertical air compressor to repair a fault or carry out routine maintenance? At Probois Machinoutils, we offer a selection of replacement parts designed to help extend the service life of your compressor and maintain its proper operation.
The Parkside PVKO 50 B2 air compressor, also identified as PVKO50B2, belongs to the vertical compressor range. Its upright design helps reduce the amount of floor space required, making it practical for installation in a garage, workshop or DIY area.
Like any machine that produces compressed air, this compressor contains various components that may wear out or require replacement after extended use.
Our catalogue includes motor carbon brushes, a drive belt, an air filter, a compressed air hose and a drain screw. These parts are intended for different areas of compressor maintenance and repair, provided that their compatibility with the exact version of your machine has been verified.
The Parkside PVKO 50 B2 vertical compressor is designed to provide compressed air for various DIY and maintenance applications, using pneumatic accessories and tools that are suitable for its technical specifications.
During operation, certain parts are exposed to mechanical stress, vibration, dust and natural wear. Over time, these factors may affect their condition and performance.
To make the maintenance and repair of your machine easier, we offer several types of replacement parts:
Replacing a defective component can sometimes restore normal operation without requiring the replacement of the entire compressor.
Motor carbon brushes for vertical air compressors are electrical components found in certain commutator motors. They provide electrical contact with the rotating part of the motor and are subject to gradual wear during operation.
When carbon brushes become too short, damaged or unable to move correctly inside their holders, they may cause motor malfunctions.
Several symptoms may indicate a potential problem:
We offer a pair of motor carbon brushes, reference 5906117015, intended for various vertical air compressors according to the compatible machine list.
This reference is notably offered for certain Scheppach, Dexter and Aircase compressors. It is essential to confirm that your version of the Parkside PVKO 50 B2 appears in the compatibility list before ordering.
Carbon brush replacement must be carried out with the machine disconnected from the electrical supply and by a person with the necessary technical skills. The condition of the commutator and brush holders should also be inspected.
The drive belt for a vertical air compressor is a mechanical transmission component that may gradually deteriorate depending on operating conditions, belt tension and the condition of the drive system.
A damaged belt can cause poor transmission of movement, unusual noises or irregular operation of the relevant mechanism.
Several signs may indicate that a drive belt needs inspection:
Our catalogue includes a drive belt for vertical air compressors, notably offered for certain Scheppach and Aircase machines.
Before selecting this part for your Parkside PVKO50B2, carefully check the original belt reference, its dimensions and the list of compatible compressor models.
When replacing a belt, it is also advisable to inspect the pulleys and other transmission components without modifying the adjustments specified by the manufacturer.
The air filter for the Parkside PVKO 50 B2 compressor is an important component for protecting the compression mechanism.
Its main function is to limit the entry of dust, particles and other impurities present in the surrounding air before they reach the intake system.
A heavily clogged filter can reduce the volume of incoming air and contribute to a decrease in compressor performance. A damaged filter may also allow more particles to enter the machine, potentially accelerating wear on certain internal components.
We offer an air filter compatible with the Parkside PVKO50B2 compressor and the Scheppach HC51V compressor.
The air filter should be inspected regularly, particularly when the compressor operates in a dusty environment such as a workshop or garage.
When the filter is damaged or can no longer perform its function correctly, replacing it helps maintain suitable air filtration for the machine.
Before ordering, check the dimensions, mounting system and reference of the filter originally installed on your compressor.
The compressed air hose for Parkside compressors carries pressurised air from the compressor outlet to a suitable pneumatic accessory or tool.
It is an important component for using the compressor under appropriate conditions, particularly for inflation, air blowing and operating compatible pneumatic accessories.
We offer a 15-metre compressed air hose with an 8 mm diameter, reference 7906100711, intended for various Scheppach and Parkside compressors according to the compatibility information.
Its 15-metre length provides additional freedom of movement around the workshop or working area.
Before selecting a compressed air hose, several characteristics should be considered:
A hose showing cracks, leaks, significant deformation or a damaged connector should be inspected and replaced when necessary.
Never use an air hose with a pressure rating lower than the maximum pressure that may be supplied by the pneumatic circuit.
The drain screw for Parkside air compressors is a component that, when designed for this purpose, allows condensation water accumulated inside the compressed air tank to be discharged.
During air compression, moisture naturally present in the surrounding air can condense inside the tank. If this water is not regularly removed, it may contribute to internal corrosion.
We offer a drain screw, reference 5906125020, intended for various Scheppach and Parkside compressors according to the list of compatible models.
A damaged, seized or poorly sealing drain screw may cause difficulties when draining the tank or lead to air leaks.
Before replacing this component, it is essential to verify its dimensions, thread and original manufacturer reference.
Draining must be performed according to the manufacturer's instructions and the safety procedures specified in the user manual. Any removal or repair of the drain screw must only be carried out after disconnecting the electrical supply and completely depressurising the tank.
When ordering a spare part for the Parkside PVKO 50 B2 compressor, it is essential to identify your machine accurately.
The Parkside range includes numerous compressor models, including the PKO 24 A1, PKO 24 B2, PKO 270 A4, PKO 270 A5, PKO 500 A1, PKO 500 A2 and PVKO 50 B2.
These machines may have significant differences in their construction, dimensions and internal components.
A part that is compatible with another Parkside compressor should therefore not automatically be considered suitable for the PVKO50B2.
Before placing an order, we recommend the following checks:
IMPORTANT: BEFORE PURCHASING, CHECK THE EXACT MODEL, MONTH AND YEAR OF MANUFACTURE, AND SERIAL NUMBER OF YOUR MACHINE. ALWAYS CONSULT THE LIST OF COMPATIBLE MACHINES ON EACH PRODUCT PAGE.
Certain symptoms may indicate that a component of your Parkside PVKO50B2 vertical air compressor needs inspection.
A motor that no longer starts, unusual mechanical noises, loss of pressure or an air leak may have several different causes.
For example, a starting problem may be caused by the electrical supply, a motor component or a mechanical fault. Similarly, reduced performance may result from a clogged filter, an air leak or a problem with the compression mechanism.
It is therefore important not to replace a component based solely on a general symptom.
An accurate diagnosis helps identify the actual cause of the problem and prevents the unnecessary purchase of parts that would not resolve the fault.
If there is any doubt concerning an electrical component or safety device, inspection should be entrusted to a qualified person.
Regular maintenance helps preserve performance and reduce the risk of breakdowns on your Parkside PVKO 50 B2 compressor.
It is advisable to periodically inspect the condition of the air filter, check pneumatic connections for leaks and monitor the general condition of accessible components.
The air tank should be drained according to the manufacturer's recommendations to reduce the accumulation of condensation water.
It is also important to follow the operating conditions specified in the user manual, particularly the permitted operating duration and the technical requirements of connected pneumatic tools.
Before carrying out any maintenance or repair work, disconnect the compressor from the electrical supply and make sure that the tank and affected circuits are completely depressurised.
Never remove a fitting, drain screw or any other pneumatic component while the circuit remains under pressure.
Work involving electrical components and safety devices must be carried out by a suitably qualified person. Safety devices must never be disabled or modified.
At Probois Machinoutils, we offer a selection of spare parts for Parkside air compressors to make the maintenance and repair of many models easier.
For the Parkside PVKO 50 B2 vertical compressor, our catalogue includes components related to the motor, transmission, air filtration and maintenance of the pneumatic circuit.
Certain references may also be used on Scheppach, Dexter or Aircase compressors, but only when this compatibility is expressly stated on the relevant product page.
Our selection evolves according to parts availability and the repair requirements of compressor users.
Discover our replacement parts for the Parkside PVKO50B2 compressor: motor carbon brushes, drive belts, air filters, compressed air hoses and drain screws.
Before ordering, take the time to check the part references and compatibility information to select the correct component for your machine and help extend its service life under appropriate operating conditions.